2006 YAMAHA TTR50 fuel tank removal

4 - 51
ENGCRANKCASE AND CRANKSHAFT
CRANKCASE AND CRANKSHAFT
E
T R..10 Nm (1.0 m • kg, 7.2 ft • Ib)
T R..10 Nm (1.0 m •
kg, 7.2 ft • Ib)
LT
4
4 3
4
4
5 6
7
9
8
8
12
5 6
4
Extent of removal Order Part name Q ’ty Remarks
CRANKCASE SEPARATION
AND CRANKSHAFT REMOVAL
Preparation for removal Seat assembly and fuel tank
Exhaust pipe
Air filter case and bottom cover Refer to “FRONT FENDER, SEAT
ASSEMBLY AND FUEL TANK ” section.
Carburetor Refer to “CARBURETOR ” section.
Drain the engine oil. Refer to “ENGINE OIL REPLACEMENT ”
section in the CHAPTER 3.
Drive sprocket Refer to “ENGINE REMOVAL ”.
Cylinder head Refer to “CYLINDER HEAD ” section.
Cylinder and piston Refer to “CYLINDER AND PISTON ” sec-
tion.
Primary driven gear Refer to “CLUTCH ” section.

5 - 17
CHASSWINGARM
EC570000
SWINGARM
Extent of removal:1 Swingarm removal
2 Rear shock absorber removal
Extent of removal Order Part name Q ’ty Remarks
SWINGARM REMOVAL
WARNING
Support the machine securely so
there is no danger of it falling over.
Preparation for removal Hold the machine by placing the
suitable stand under the engine.
Seat assembly Refer to “FRONT FENDER, SEAT
ASSEMBLY AND FUEL TANK ” section
in the CHAPTER 4.
Rear wheel Refer to “FRONT WHEEL AND REAR
WHEEL ” section.
Drive chain
1 Rear shock absorber 1
2 Drive chain guard 1
3 Drive chain support 1
4 Drive chain guide 1
1
2

6 - 10
–+ELEC
STARTER MOTOR
1
3
45 6
8
2
\b
1
1
LS
New
New
T R..10 Nm (1.0 m •
kg, 7.2 ft • Ib)
7
Extent of removal:1 Starter motor disassembly
Extent of removal Order Part name Q ’ty Remarks
STARTER MOTOR REMOVAL
Preparation for removal Drain the engine oil. Refer to “ENGINE OIL REPLACEMENT ”
section in the CHAPTER 3.
Bottom cover Refer to “FRONT FENDER, SEAT
ASSEMBLY AND FUEL TANK ” section
in the CHAPTER 4.
1 Starter motor 1 STARTER MOTOR DISASSEM-
BLY
1 Front bracket 1
2 O-ring 1
3 Brush set 1
4 Washer 1
5 Oil seal 1
6 Bearing 1
1
ELECTRIC STARTING SYSTEM