2006 YAMAHA TTR50 check oil

–+ELEC
6 - 14
CHARGING SYSTEM
EC680000
CHARGING SYSTEM
EC681001
INSPECTION STEPS
If the battery is not charged, use the following inspection steps.
*1 marked: Refer to “FUSE INSPECTION ” section in the CHAPTER 3.
*2 marked: Refer to “BATTERY INSPECTION AND CHARGING ” section in the CHAPTER 3.
NOTE:
 Remove the following parts before inspection.
1) Seat assembly
Refer to “FRONT FENDER, SEAT ASSEMBLY AND FUEL TANK ” section in the CHAPTER 4.
 Use the following special tool in this inspection.
Pocket tester:
YU-03112-C/90890-03112
*1 Check fuse. Replace fuse and
check wire harness.
*2 Check battery. Recharge or replace.
Check each coupler and wire connection. Repair or replace.
Check charging voltage. Charging system is
good.
Check AC magneto. Charging coil Replace.
Replace rectifier/regulator.
OK
OK
OK
No good
OK
No good
OK
No good
No good
No good

6 - 15
–+ELECCHARGING SYSTEM
EC624000
COUPLERS AND LEADS CONNECTION
INSPECTION
1. Check:
Couplers and leads connection
Rust/dust/looseness/short-circuit →
Repair or replace.
CHARGING VOLTAGE INSPECTION
1. Start the engine.
2. Inspect: Charging voltage
Out of specification → If no failure is
found in checking the charging coil resis-
tance, replace the rectifier/regulator.
Tester (+) lead → Red lead
1
Tester ( –) lead
→ Black lead
2
Charging
voltage Tester selector
position
14.0 V at
5,000 r/min DCV-20
2
1
W R
Y/R
B
AC MAGNETO INSPECTION
1. Inspect: Charging coil resistance
Out of specification → Replace.
Tester (+) lead → White lead
1
Tester ( –) lead
→ Black lead
2
Charging coil
resistance Tester selector
position
0.96 ~ 1.44 Ω at
20 °C (68 °F) Ω

× 1
WSb
B
Y 1
2

–+ELEC
6 - 16
CARBURETOR HEATING SYSTEM
CARBURETOR HEATING SYSTEM
INSPECTION STEPS
Use the following steps for checking the possibility of the malfunctioning carburetor heating system.
NOTE:
 Remove the following parts before inspection.
1) Seat
2) Fuel tank
Refer to “FRONT FENDER, SEAT ASSEMBLY AND FUEL TANK ” section in the CHAPTER 4.
 Use the following special tools in this inspection.
Pocket tester:
YU-03112-C/90890-03112
Check entire carburetor
heating system for connec- tion. Repair or replace.
Check thermo switch. Replace.
Check carburetor heater. Replace. Check AC magneto. Lighting coil Replace.
Replace rectifier/regulator.
OK
OK
OK
OK
No good
No good
No good
No good