4-13 1. Speedometer 2. Fuel meter
3.“H” button 4.“M” button
5. Clock/Hour meter
6. Odometer/Tripmeter A/Tripmeter B
7. TRIP/ODO button
8. Clock/Hour “”/“” button
1. Compteur de vitesse
2. Afficheur du niveau de carburant
3. Bouton de réglage des heures “H”
4. Bouton de réglage des minutes “M”
5. Montre/compteur horaire
6. Compteur kilométrique/totalisateurs journaliers A et B
7. Bouton TRIP/ODO
8. Bouton de sélection montre/compteur horaire “”/“”
1. Velocímetro 2. Medidor de combustible
3. Botón “H”4. Botón “M”
5. Reloj/contador de horas
6. Cuentakilómetros/cuentakilómetros parcial A/
cuentakilómetros parcial B
7. Botón TRIP/ODO
8. Reloj/Botón “”/“” de la hora
Odometer and tripmeter modes
Pushing the “TRIP/ODO” button switches the dis-
play between the odometer mode “ODO” and the
tripmeter modes “A” and “B” in the following order:
ODO
→TRIP A
→TRIP B
→ODO
To reset a tripmeter, select it by pushing the
“TRIP/ODO” button, and then push the
“TRIP/ODO” button for at least three seconds. The
tripmeters can be used to estimate the distance
that can be traveled with a full tank of fuel. This in-
formation will enable you to plan future fuel stops.NOTE:_ Holding in the “TRIP/ODO” button and then turning
the key to “ON” switches the display between
“mph” and “km/h”. _
U2C660.book Page 13 Monday, April 11, 2005 10:29 AM
