2-3
E
1Quick Shift Trim System (QSTS) selector
Use to select the trim angle of the watercraft.
2QSTS shift lock lever
3Start switch
Push to start the engine.
4Engine shut-off switch
Remove the clip to stop the engine and dis-
able it from starting.
5Clip
Insert into the engine shut-off switch to enable
starting of the engine.
Remove to stop the engine or prevent acci-
dental star ting of the engine or unauthorized
use of the watercraft.
6Rearview mirrors
7Multifunction meter
Use to check watercraft operation.8Shift lever
Use to put the watercraft into forward or
reverse.
9Throttle lever
Use to accelerate and decelerate.
0Tilt lever
Use to adjust the tilt of the handlebars.
AGlove compartment
BRemote control transmitter
CEngine stop switch
Push to stop the engine normally.
DEngine shut-off cord (lanyard)
Attach to wrist so that the engine stops if the
operator falls off the watercraft.
EWatertight compartment
FBeverage holder
E_F1X-70.book Page 3 Friday, August 26, 2005 11:00 AM
