2006 YAMAHA BLASTER 200 fuel cap

[x] Cancel search: fuel cap

Page 14 of 388

YAMAHA BLASTER 200 2006  Notices Demploi (in French) LOCATION OF THE WARNING AND
SPECIFICATION LABELS .......................1-1
SAFETY INFORMATION .........................2-1
DESCRIPTION AND MACHINE
IDENTIFICATION.....................................3

Page 52 of 388

YAMAHA BLASTER 200 2006  Notices Demploi (in French) 2-15
8Always maintain proper tire pressure as
described in this manual.
8Never modify an ATV through improper instal-
lation or use of accessories.
8Never exceed the stated load capacity for an
ATV. C

Page 56 of 388

YAMAHA BLASTER 200 2006  Notices Demploi (in French) 3-1
EBU00032
DESCRIPTION AND MACHINE
IDENTIFICATION
1. Seat 11. Rear shock absorber
2. Fuel tank cap 12. Tail/brake light
3. Headlight 13. Rear wheel
4. Brake pedal 14. Shift pedal
5. Rear brake light

Page 90 of 388

YAMAHA BLASTER 200 2006  Notices Demploi (in French) 4-25
EBU00092
Fuel tank cap
Remove the fuel tank cap by turning it counter-
clockwise.
EBU00093
Fuel cock
The fuel cock supplies fuel from the fuel tank to
the carburetor.
The fuel cock has three posi

Page 110 of 388

YAMAHA BLASTER 200 2006  Notices Demploi (in French) 5-9
EBU01311
Fuel
Make sure there is sufficient gasoline in the
tank.
NOTE:
(For Europe only)
If knocking or pinging occurs, use a different
brand of gasoline or higher octane grade.
1. Filler tube 2.

Page 112 of 388

YAMAHA BLASTER 200 2006  Notices Demploi (in French) 5-11
w
8Do not overfill the fuel tank. Fuel expands
when it heats up. If the fuel tank is over-
filled, fuel could spill out due to heat from
the engine or the sun.
8Be careful not to spill fuel, espe

Page 298 of 388

YAMAHA BLASTER 200 2006  Notices Demploi (in French) 8-49
5. Install the mixing chamber cap and tighten it.
6. Install the securing plate by installing the
screw.
NOTE:
When installing the securing plate, align the slot
in the securing plate with a proj

Page 354 of 388

YAMAHA BLASTER 200 2006  Notices Demploi (in French) 8-105
EBU00440
Troubleshooting chart
Check fuel flow
1.  Fuel
Check if there is
fuel in the fuel
tank
2.  Compression
Kick the kick lever to
see if there is
compression
3.  Ignition
Remove plug and
ch
Page:   1-8 9-16 next >