2006 YAMAHA BANSHEE 350R weight

[x] Cancel search: weight

Page 220 of 396

YAMAHA BANSHEE 350R 2006  Notices Demploi (in French) 7-49
It is important when climbing a hill to make sure
that your weight is transferred forward on the ATV.
This can be accomplished by leaning forward and,
on steeper inclines, standing on the footboa

Page 222 of 396

YAMAHA BANSHEE 350R 2006  Notices Demploi (in French) 7-51
If you are climbing a hill and you find that you have
not properly judged your ability to make it to the
top, you should turn the ATV around while you still
have forward motion (provided you have

Page 226 of 396

YAMAHA BANSHEE 350R 2006  Notices Demploi (in French) 7-55
WARNING
_ Use proper gear and maintain steady speed
when climbing a hill. 
If you lose all forward speed: 
Keep weight uphill. 

Apply the brakes. 

Lock the parking brake, after you are
stopp

Page 228 of 396

YAMAHA BANSHEE 350R 2006  Notices Demploi (in French) 7-57
RIDING DOWNHILL
When riding your ATV downhill, shift your weight
as far to the rear and uphill side of the ATV as pos-
sible. Move back on the seat and sit with your
arms straight. Choose a low g

Page 230 of 396

YAMAHA BANSHEE 350R 2006  Notices Demploi (in French) 7-59
WARNING
_ Always follow proper procedures for going
down hills as described in this Owner’s Manu-
al. 
Note: a special technique is required when
braking as you go down a hill. 
Always check t

Page 232 of 396

YAMAHA BANSHEE 350R 2006  Notices Demploi (in French) 7-61
CROSSING A SLOPE
Traversing a sloping surface on your ATV requires
you to properly position your weight to maintain
proper balance. Be sure that you have learned the
basic riding skills on flat g

Page 234 of 396

YAMAHA BANSHEE 350R 2006  Notices Demploi (in French) 7-63
If your ATV does begin to tip over, gradually steer
in the downhill direction if there are no obstacles in
your path. As you regain proper balance, gradually
steer again in the direction you wish

Page 242 of 396

YAMAHA BANSHEE 350R 2006  Notices Demploi (in French) 7-71
SLIDING AND SKIDDING
Care should be used when riding on loose or slip-
pery surfaces since the ATV may slide. If unex-
pected and uncorrected, sliding could lead to an
accident.
To reduce the ten
Page:   < prev 1-8 9-16 17-24 next >