2006 YAMAHA BANSHEE 350 maintenance schedule

2-5
8Never operate at speeds too fast for your skills
or the conditions. Always go at a speed that is
proper for the terrain, visibility, operating con-
ditions, and your experience.
8Never attempt wheelies, jumps, or other
stunts.
8Always inspect your ATV each time you use it
to make sure it is in safe operating condition.
Always follow the inspection and maintenance
procedures and schedules described in this
manual.
8Always keep both hands on the handlebars
and both feet on the footrests of the ATV dur-
ing operation.
8Always go slowly and be extra careful when
operating on unfamiliar terrain. Always be
alert to changing terrain conditions when oper-
ating the ATV.

5-4
w
Always inspect your ATV each time you use it to make sure the ATV is in safe operating condi-
tion. Always follow the inspection and maintenance procedures and schedules described in the
Owner’s Manual. Failure to inspect increases the possibility of an accident or equipment dam-
age.
XG
Toujours effectuer ces contrôles avant chaque départ afin de s’assurer que le VTT peut être utili-
sé en toute sécurité.
Toujours respecter les procédés et intervalles de contrôle et d’entretien repris dans ce manuel.
Omettre ces contrôles accroît les risques d’accident ou d’endommagement du véhicule.
XR
Inspeccionar siempre el ATV cada vez que vaya a utilizarse, para asegurarse de que está en
condiciones de funcionar sin peligro.
Seguir siempre los procedimientos y programas de inspección y mantenimiento descritos en el
“Manual del Propietario”. Si no se inspecciona la máquina, aumenta el riesgo de accidente o
avería.

7-13
Do not operate after consuming alcohol or
drugs.
Operator’s performance capability is reduced by
the influence of alcohol or drugs.
w
Never consume alcohol or drugs before or
while driving this ATV.
Pre-operation checks
Always perform the pre-operation checks listed
on page 5-1 before riding for safety and proper
care of the ATV.
w
Always inspect your ATV each time you use
it to make sure the ATV is in safe operating
condition. Always follow the inspection and
maintenance procedures and schedules
described in the Owner’s Manual. Failure to
inspect the ATV before operating or failure to
properly maintain the ATV increases the pos-
sibility of an accident or equipment damage.