2006 YAMAHA BANSHEE 350 check engine

[x] Cancel search: check engine

Page 12 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) LOCATION OF THE WARNING AND
SPECIFICATION LABELS .......................1-1
SAFETY INFORMATION .........................2-1
DESCRIPTION AND MACHINE
IDENTIFICATION.....................................3

Page 62 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) 4-5
EBU00063
Throttle lever
Once the engine is running, movement of the
throttle lever will increase the engine speed.
Regulate the speed of the machine by varying
the throttle position. Because the t

Page 136 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) 6-9
EBU00180
Starting a warm engine
To start a warm engine, refer to the “Starting a
cold engine” section. The starter (choke) should
not be used. The throttle should be opened
slightly.
EBU00538

Page 262 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) 8-17
EBU10981
Transmission oil
Transmission oil measurement
1. Place the ATV on a level surface.
2. Warm up the engine for several minutes,
and then stop it.
3. Remove the oil filler cap and wipe off

Page 268 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) q
w
1. Maximum level mark
2. Minimum level mark
1. Repère maximum
2. Repère minimum
1. Marca de máximo
2. Marca de mínimo
8-23
7. Start the engine and warm up for a few
minutes. While warming up,

Page 282 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) 8-37
12. Run the engine several minutes. Stop the
engine, and then check the coolant level in
the radiator. If it is low, add more coolant
until it reaches the top of the radiator.
13. Fill the coolan

Page 294 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) 8-49
NOTE:
The air filter element should be cleaned every
20-40 hours. It should be cleaned and lubricated
more often if the machine is operated in
extremely dusty areas. Each time the air filter
elem

Page 296 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) 8-51
EBU03004
Carburetor settings
In extremely cold weather, it is necessary to
change the carburetor settings to maintain opti-
mum engine performance and to prevent engine
damage.
w
8Improperly serv
Page:   1-8 9-16 next >