2006 YAMAHA BANSHEE 350 tires

[x] Cancel search: tires

Page 13 of 400

YAMAHA BANSHEE 350 2006  Manuale de Empleo (in Spanish) Tires ...................................................5-23
How to measure tire pressure ............5-27
Tire wear limit .....................................5-29
Fittings and fasteners ...........

Page 26 of 400

YAMAHA BANSHEE 350 2006  Manuale de Empleo (in Spanish) 1-3
q
w
q
GB
D
E
FI
NL
P
S Set with tires cold.
Bei kalten Reifen.
Ajuste con los
neumáticos en frío.
Pneus à froid.Impostare a pneumatici
freddi.
Wanneer de banden
koud zijn.
Regular com pneus
fri

Page 42 of 400

YAMAHA BANSHEE 350 2006  Manuale de Empleo (in Spanish) 2-13
8Never attempt to operate over large obstacles,
such as large rocks or fallen trees. Always fol-
low proper procedures when operating over
obstacles as described in this manual.
8Always be carefu

Page 96 of 400

YAMAHA BANSHEE 350 2006  Manuale de Empleo (in Spanish) 5-1
EBU00113
PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Brakes9Check operation, free play, fluid level and fluid leakage. 5-5–5-9
9Fill with DOT 4

Page 118 of 400

YAMAHA BANSHEE 350 2006  Manuale de Empleo (in Spanish) 5-23
EBU00158
Tires
Always use the recommended tires.
w
Use of improper tires on this ATV, or opera-
tion of this ATV with improper or uneven tire
pressure, may cause loss of control, increas-
ing you

Page 120 of 400

YAMAHA BANSHEE 350 2006  Manuale de Empleo (in Spanish) 5-25
8Check and adjust tire pressures when the
tires are cold.
8Tire pressures must be equal on both
sides.
3. Tire pressure below the minimum speci-
fied could cause the tire to dislodge from
the rim

Page 122 of 400

YAMAHA BANSHEE 350 2006  Manuale de Empleo (in Spanish) 5-27
EBU14450
How to measure tire pressure
Use the low-pressure tire gauge.
NOTE:
The low-pressure tire gauge is included as stan-
dard equipment. Make two measurements of the
tire pressure and use th

Page 146 of 400

YAMAHA BANSHEE 350 2006  Manuale de Empleo (in Spanish) 6-19
EBU00208
To decelerate
When slowing down or stopping, release the
throttle and apply the brakes smoothly and
evenly. As you slow down, shift to a lower gear.
Be sure that the engine has sufficien
Page:   1-8 9-16 next >