General information
Important
Before you operate your car for the first time, please familiarize
yourself with the new-engine oil consumption information on page
160. You should also be familiar with the information in chapters
one, two and four of this manual.
Information contained in the balance of the manual is extremely
useful and should be read after operating the vehicle for the first
time.
The manual is structured so that it can be used for reference. For
this reason, it should be kept in the car for ready access.
Do not export your Volvo to another country before investigating
that country’s applicable safety and exhaust emission requirements.
In some cases it may be difficult or impossible to comply with these
requirements. Modifications to the emission control system(s) may
render your Volvo not certifiable for legal operation in the U.S.,
Canada and other countries.
All information, illustrations and specifications contained in this
manual are based on the latest product information available at the
time of publication. Please note that some vehicles may be equipped
differently, depending on special legal requirements and that
optional equipment described in this manual may not be available in
all markets.
Volvo reserves the right to make model changes at any time, or to
change specifications or design, without notice and without
incurring obligation.
CALIFORNIA Proposition 65 Warning
WARNING! Engine exhaust, some of its constituents, and certain
vehicle components contain or emit chemicals known to the state of
California to cause cancer, and birth defects or other reproductive
harm. In addition, certain fluids contained in vehicles and certain
products of component wear contain or emit chemicals known to the
State of California to cause cancer, and birth defects or other
reproductive harm.
Shiftlock
When your car is parked, the gear selector is locked in the (P)ark
position. To release the selector from this position, turn the ignition key
to position II (or start the engine), depress the brake pedal, press the
button on the front of the gear selector knob and move the selector from
(P)ark.
Keylock
This means that when you switch off the ignition, the gear selector must
be in the (P)ark position before the key can be removed from the
ignition switch.
Anti-lock Brake System (ABS)
The ABS system in your car performs a self-diagnostic test when the
vehicle first reaches the speed of approximately 12 mph (20 km/h). The
brake pedal will pulsate several times and a sound may be audible from
the ABS control module. This is normal.
Fuel filler door
Press the button on the light switch panel (see page 35) when the car is at
a standstill to unlock the fuel filler door. Please note that the fuel filler
door will remain unlocked until the car begins to move forward.
An audible click will be heard when the fuel filler door relocks.
Fuel filler cap
After refueling, close the fuel filler cap by turning it clockwise until it
clicks into place. If this cap is not closed tightly or if the engine is
running when the car is refueled, the Malfunction Indicator Lamp
(“Check Engine” light) may indicate a fault.
WARNING! If your vehicle is involved in an accident, unseen damage
may affect your vehicle's driveability and safety.
32
Trip computer (option)
ABC3601859d
Trip computer
The trip computer stores information gathered from several systems in
your car and has four menus that can be displayed in the text window.
•'
•(
•5
•(
•5 ,5
1
4
C
8
(
9 (
Trip computer controls and functions
The four* trip computer functions can be accessed by twisting control B
one step at a time in either direction. Twisting the control a fifth time**
returns you to the original function.The trip computer can be reset (current data will be erased from system
memory) by pressing RESET (button C).
1. Driving distance on current fuel reserve
This function shows the approximate distance that can be driven on the
fuel remaining in the tank. This calculation is based on average fuel
consumption during the last 12 miles (20 km) of driving and the amount
of fuel remaining in the tank when the reading was taken.
When the driving distance on current fuel reserve is less than 12 miles
(20 km), “----” will be displayed in the text window.
2. Average fuel consumption
This value indicates fuel consumption since the last time the trip
computer was reset (by pressing RESET, button C). When the engine is
switched off, information on fuel consumption is stored and remains in
system memory until the RESET (button C) is pressed again.
3. Current fuel consumption
This value indicates the current fuel consumption, based on readings
taken once per second. When the car is not moving, “----” will be
displayed.
4. Average speed
This value indicates average speed since the last time the trip computer
was reset (by pressing RESET, button C). When the engine is switched
off, information on average speed is stored and remains in system
memory until the RESET (button C) is pressed again.
5. Current speed in miles per hour (Canadian models only)
This function provides the driver with an instantaneous conversion of the
car’s current speed from km/h to mph.
* Five functions on Canadian models
** A sixth time on Canadian models
