2006 TOYOTA TACOMA child restraint

11 62006 TACOMA from Jan.’06 Prod. (OM35871U)
LS13064b
3. Pull the seatback release lever andswing the seatback forward slightly.
Route the top strap through the
routing device as shown in the il-
lustration.
Latch the hook onto the anchor
bracket.
Return the seatback to upright posi-
tion.
LS13065b
4. Fix the child restraint system withthe seat belt and tighten the top
strap.
Replace the passenger head re-
straint.
Store the removed cover in a safe place
such as the glove box.
Be sure to replace the cover when the
anchor bracket is not in use.
For instructions on installing the child re-
straint system, see “Child restraint” on
page 90 in this Section.
CAUTION
When returning the seatback to its
original position, make sure the
seatback is securely locked by
pushing forward and rearward on
the top of the seatback.
Make sure the top strap is securely
latched, and check that the child
restraint system is secure by push-
ing and pulling it in different direc-
tions. Follow all the installation in-
structions provided by its manufac-
turer.

11 72006 TACOMA from Jan.’06 Prod. (OM35871U)
LS13069
Front position
LS13070a
Rear position
Follow the procedure below for a child
restraint system that requires the use
of a top strap.
LS13071
Symbol mark
Routing
device
or
upper
anchor
bracket
Lower
anchor
bracket
Use the routing device and the anchor
bracket to attach the top strap.
Upper anchor bracket is installed for front
passenger ’s seating position, lower anchor
bracket is installed for right−rear seating
position.
This symbol indicates the locations of
user ready anchor brackets.
—U sin g a to p st rap
(access cab models)

11 82006 TACOMA from Jan.’06 Prod. (OM35871U)
LS13072Symbol mark
TO USE THE ANCHOR BRACKET:
Front position—1. Remove the passenger head re- straint.
Lightly push down on the top sur-
face of the anchor bracket cover
with the symbol mark shown in the
illustration, then pull it forward to
remove.
LS13073
2. Fix the child restraint system withthe seat belt.
Latch the hook onto the anchor
bracket on the back panel and tight-
en the top strap.
For instructions on installing the child re-
straint system, see “Child restraint” on
page 90 in this Section.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.

11 92006 TACOMA from Jan.’06 Prod. (OM35871U)
LS13074
3. Replace the head restraint.
Store the removed cover in a safe place
such as the glove box.
Be sure to replace the cover when the
anchor bracket is not in use.
LS13075
Symbol mark
Rear position— 1. Upper anchor bracket: Lightly push down on the top sur-
face of the upper anchor bracket
cover with the symbol mark shown
in the illustration, then pull it for-
ward to remove.
Lower anchor bracket:
Pull up the lower anchor bracket.
LS13076a
Routing
device
2. Fix the child restraint system withthe seat belt.
Route the top strap through the
routing device as shown in the il-
lustration.
For instructions on installing the child re-
straint system, see “Child restraint” on
page 90 in this Section.
CAUTION
Make sure the top strap is not
twisted.

1202006 TACOMA from Jan.’06 Prod. (OM35871U)
LS13077a
3. Latch the hook onto the rear loweranchor bracket and tighten the top
strap.
Store the removed covers in a safe place
such as the glove box.
Be sure to replace the covers when the
anchor bracket is not in use.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
LS13051
Follow the procedure below for a child
restraint system that requires the use
of a top strap.
LS13054a
Anchor
brackets
Symbol
mark
Use the anchor bracket on the back panel
to attach the top strap.
Anchor brackets are installed for each
rear seating position.
This symbol indicates the locations of the
anchor brackets.
—U sin g a to p st rap
(double cab models)

1212006 TACOMA from Jan.’06 Prod. (OM35871U)
LS13066
TO USE THE ANCHOR BRACKET:1. Remove the head restraint.
LS13067
2. Pull the seatback release strap and swing the seatback forward slightly,
then latch the hook onto the anchor
bracket.
Return the seatback to its original
position.
LS13068
3. Fix the child restraint system withthe seat belt and tighten the top
strap.
Replace the head restraint.
For instructions on installing the child re-
straint system, see “Child restraint” on
page 90 in this Section.

1222006 TACOMA from Jan.’06 Prod. (OM35871U)
CAUTION
When returning the seatback to its
original position, make sure the
seatback is securely locked by
pushing forward and rearward on
the top of the seatback. Failure to
do so will prevent the seat belt
from operating properly.
Make sure the top strap is securely
latched, and check that the child
restraint system is secure by push-
ing and pulling it in different direc-
tions. Follow all the installation in-
structions provided by its manufac-
turer.
LS13078
Separate seats
LS13079
Bench seat
Lower anchorages for Child Restraint
Systems equipped with hook or buckle
type attachments are installed in the
front passenger seat.
The anchorages are installed in the gap
between the seat cushion and seatback of
the right side of the seat as shown in the
illustration.
Child Restraint Systems equipped with
hook or buckle type attachements can be
installed using these anchorages. For such
systems, it is not necessary to use the
vehicle seatbelts.
—Installation with child
restraint lower anchorages
(regular cab models)

1232006 TACOMA from Jan.’06 Prod. (OM35871U)
LS13160a
1st lock
position
10th lock
position
CHILD RESTRAINT SYSTEM
INSTALLATION 1. Separate seats only—Fold down the seatback and back to the 1st lock
position (most upright position) until
it locks into place. Adjust the seat-
back to the 10th lock position.
Make sure the seatback is locked secure-
ly.LS13080
Canada only
Ty p e A
LS13081
Canada only
Ty p e B