2006 TOYOTA SIENNA engine

[x] Cancel search: engine

Page 429 of 518

TOYOTA SIENNA 2006 XL20 / 2.G Owners Manual 06 SIENNA_U (L/O 0603)
421
2006 SIENNA from March ‘06 Prod. (OM45443U)
1. Reduce your speed gradually,keeping a straight line. Move cau-
tiously off the road to a safe place
well away from the traff

Page 438 of 518

TOYOTA SIENNA 2006 XL20 / 2.G Owners Manual 06 SIENNA_U (L/O 0603)
430
2006 SIENNA from March ‘06 Prod. (OM45443U)
4. Loosen all the wheel nuts.
Always loosen the wheel nuts before
raising the vehicle.
Turn the wheel nuts counterclockwise
to

Page 444 of 518

TOYOTA SIENNA 2006 XL20 / 2.G Owners Manual 06 SIENNA_U (L/O 0603)
436
2006 SIENNA from March ‘06 Prod. (OM45443U)
Initial adjustment of the tire pres-
sure warning system is necessary
after you have rotated your tires.
See “Tire pressure w

Page 447 of 518

TOYOTA SIENNA 2006 XL20 / 2.G Owners Manual 06 SIENNA_U (L/O 0603)
439
2006 SIENNA from March ‘06 Prod. (OM45443U)
You can purchase a new key at your
Toyota dealer if you can give them the
key number. If your vehicle is equipped
with the engi

Page 448 of 518

TOYOTA SIENNA 2006 XL20 / 2.G Owners Manual 06 SIENNA_U (L/O 0603)
440
2006 SIENNA from March ‘06 Prod. (OM45443U)
3. Insert your finger into the hole topush down the shift lock override
button. You can shift out of “P”
position only whil

Page 453 of 518

TOYOTA SIENNA 2006 XL20 / 2.G Owners Manual 06 SIENNA_U (L/O 0603)
445
2006 SIENNA from March ‘06 Prod. (OM45443U)
Check the interior of your vehicle. Wa-
ter and dirt  can accumulate under the
floor mats and could cause corrosion. Oc-
casion

Page 461 of 518

TOYOTA SIENNA 2006 XL20 / 2.G Owners Manual 06 SIENNA_U (L/O 0603)
453
2006 SIENNA from March ‘06 Prod. (OM45443U)
If you are a skilled do−it−yourself mechan-
ic, the Toyota service manuals are recom-
mended. Please be aware that do −it

Page 462 of 518

TOYOTA SIENNA 2006 XL20 / 2.G Owners Manual 06 SIENNA_U (L/O 0603)
454
2006 SIENNA from March ‘06 Prod. (OM45443U)
Power steering fluid level
Check the level through the reservoir. The
level should be in the “HOT” or “COLD”
range depe