2006 TOYOTA SIENNA bluetooth

11 4
Sending a tone by the speed tone
You can send a tone by the speed tone.
(For registering the speed tone, see “Reg-
istering the speed tone” on page 117.)
1. Touch “Speed Tone”.
2. Touch the desired switch to send a
tone.
(e) Change the settings of the
Bluetooth phone
Touch “Settings” to display “Settings”
screen.
You can change the settings of the phone.(i) Registering the speed dial
You can register the desired telephone
number
from phone book, dialed numbers
and received calls. Up to 17 speed dial
numbers can be registered.
The 6th entry is the speed dial for redialing.
1. Touch “Speed Dial” to display the
“Speed Dial Settings” screen.

122
The Bluetooth connection status at
startup
When the ignition switch is set at ACC or
ON and the Bluetooth is automatically
connected, the connection check is dis-
played.
Touch “On” or “Off” of “Show Bluetooth
connection status at start up”.
Initializing the settings
You can initialize the settings.
Touch “Default”.
Touch “YES”. (v) Setting the phone book
You can register phone numbers in the
phone book.
Touch “Phone Book” to display the
“Phone Book Management” screen.
You can do the detail settings of phone
book.

123
Transferring a telephone number
You can transfer the telephone numbers in
your Bluetooth phone to the system. Up to
1000 person’s data (up to 2 numbers a per-
son) can be registered in the phone book.
Transfer it while the engine is running.
1. Touch “Transfer Data” to display “Se-
lect Group” screen.
2. Select the group you want to transfer
to.
3. Touch “Overwrite” or “Add to”.
4. Transfer the phone book data to the
system using the Bluetooth phone.
This screen appears while transferring. To
cancel it, touch “Cancel” . If the transferring
is interrupted on the way , the phone book data
transferred until then can be memorized in the
system.
5. When this screen is displayed, the
transfer is completed.

137
(f) Set a Bluetooth phone
Selecting a Bluetooth phone
In case you register more than one Blue-
tooth phone, you need to choose a favor-
ite one.
1. Touch “Settings” to display “Settings”
screen.
2. Touch “Select Telephone” to display
“Select Telephone” screen. You can se-
lect the Bluetooth phone from a maximum
of 6 numbers.
“Empty” is displayed when you have not reg-
istered a Bluetooth phone yet.
Bluetooth mark is displayed when you
choose the phone.
Although you can register up to 6 Bluetooth
phones in the system, only one Bluetooth
phone can function at a time.
3. Touch “OK”.
When the result message is displayed, you
can use the Bluetooth phone.

138
When another Bluetooth phone is trying to
connect, this screen is displayed.
Touch “YES” or “NO”.
Displaying Bluetooth information
You can see or set the information of the
Bluetooth phone on the system.
Device Name The name of Bluetooth . . . .
phone which is dis-
played on the screen.
You can change it into a
desired name.
Bluetooth Device Address The address peculiar to
. . . . . . . . . . . . .
the system. You cannot
change it.
1. Select the desired phone and touch
“Information”.
2. Touch “Change”.
3. When you complete the setting, touch
.

139
Changing a Device Name
You can change a Device Name. If you
change a Device Name, the name regis-
tered in your cellular phone is not
changed.
1. Touch “Change”.
2. Use the software keyboard to input the
Device name.
Changing the Bluetooth settings
You can change the display and settings of
Bluetooth information on the system.
The information displays the following items.
Device Name The name in the Blue- . . . .
tooth network. You can
change it.
Passkey The password when you
. . . . . . . . .
register your cellular
phone in the system. You
can change it into the fig-
ure of 4− 8 digits.
Bluetooth Device Address The address peculiar to
. . . . . . . . . . . . .
the system. You can not
change it. If you have
registered two Bluetooth
phones with the same
Device Name or Pass-
key and you cannot dis-
tinguish one from the
other, refer to it. When you change the Device Name or
Passkey, do
the followings.
1. Touch “Bluetooth”.
2. Touch “Change” of “Device Name” or
“Passkey”.

140
3. Use the software keyboard to input the
Device Name.
You can input up to 20 characters.
4. Input a Passkey with 4 8 digits.
When you touch , the inputted number is
deleted.
5. When you complete the setting, touch
.
Initializing the Bluetooth settings.
You can initialize the settings.
1. Touch “Default”.
2. Touch “YES”.

141
Deleting a Bluetooth phone
1. Touch “Delete” of “Bluetooth Tele-
phone”.
2. Select the telephone you want to delete
and touch “OK”.
3. Touch “YES”.
When you delete the telephone while
another Bluetooth phone is connecting,
this message is displayed.
Touch “YES”.
Displaying the information of the Blue-
tooth phone you delete
You can display the information of the
Bluetooth phone before you delete it and
you can make sure whether the telephone
you delete is correct or not.
1. Select the telephone you want to dis-
play the information about.