3
2
OVERVIEW
BASIC HYBRID VEHICLE OPERATION
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
Master key Ignition key & wireless remote.
Mechanical key Fits into master key and can be
removed to manually lock/unlock driver’ s door only
.
Ignition key slot When inserting, push completely
in. When removing, gently pull, it will be pushed
out by a spring. DO NOT FORCE THE KEY ;if it
cannot be removed, push it all the way in again,
then pull it out.
To remove or replace mechanical key Slide the
lock knob in the direction of the arrow .
Key fob
BASIC HYBRID VEHICLE
OPERATION
Master key
Mechanical key
*
Ignition key
(key fob) slot
*Lock/Unlock the driver’s door only
Slide Pull out
Hybrid Synergy Drive System
•The vehicle has both high voltage DC and AC systemsas well as a 12 volt system. DC and AC high voltage
are both very dangerous and can cause death, severe
burns, electric shock or other serious injuries.
•In order to avoid personal injuries, do not touch, remove or replace high voltage cables which are
colored orange, and/or their connectors, high voltage
parts such as the inverter unit, Hybrid vehicle
battery, etc.
The Hybrid Synergy Drive System utilizes a computer
controlled gasoline engine and electric motor to
provide the most efficient combination of power for
the vehicle. To conserve energy, when the brakes
are applied, braking force generates electricity
which is then sent to the battery. In addition, the
engine shuts off when the vehicle is stopped. The
benefits are better fuel economy, reduced vehicle
emissions and improved performance.
Note: Fuel consumption and energy information of
the Hybrid System are shown on the multi
information display .
Refer to the Owner’s Manual for more details.
Tips for improved fuel economy
Ensure tire pressures are maintained at levels
specified in the Owner's Manual.
Link trips, if possible, to reduce engine cold starts.
Avoid driving at speeds that are higher than
necessary
, especially on the highway.
When possible, avoid sudden stops to maximize
regenerative braking energy.
Minimize use of the air conditioning.
06 Prius PRG Inside 11/10/05 5:44 PM Page 2
BASIC HYBRID VEHICLE OPERATION
7
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
6
BASIC HYBRID VEHICLE OPERATION
Insert key*.
Depress the brake pedal, and push the “POWER”
button briefly and firmly.
The “READY” light will blink. After a few
seconds, when the light remains ON and a beep
sounds, you may begin driving.
Turning the Hybrid System ON
Without pressing down on the brake pedal
The brake pedal must be depressed to turn the
Hybrid System on. If the brake pedal is not
depressed, pressing “POWER” will change the
operation mode in succession from:
Pressing down on the brake pedal
ACC
IG ON
OFF
Accessories such as radio will operate.
Ignition is on, Hybrid System is not
engaged.
All systems OFF.
*It is not necessary to insert the ignition key (key
fob) if Smart Key system is installed and activated.
Smart Key unlock functions(if equipped)
The Smart Key unlocking function can be
programmed to operate in 3 different modes when
Smart Key is activated. In all modes, grasping the
front passenger door handle will unlock all doors.
To open driver side door only, grasp driver side
handle.
To open all doors, grasp any door handle.
To open driver side door or either back door
independently, grasp the handle.
Refer to the Owner’s Manual for more information
on this feature, and how to change modes.
Smart Key system cancel switch
NOTE: Toconserve battery power, turn the Smart K ey
system “OFF” when not using the vehicle for prolonged
periods of time. For more battery saving information,
refer to the
Owner’s Manual for more details.ON
OFF
Push
Unlocking operation
Front door
NOTE: After unlocking, if a door is not opened
within thirty (30) seconds, all doors will relock for
safety. R
efer to your Owner’s Manual, and the
following section of this guide for Smart Key
unlocking programmable options.
Rear hatch
06 Prius PRG Inside 11/10/05 5:44 PM Page 6
