2006 TOYOTA PRIUS lock

OVERVIEW
BASIC HYBRID VEHICLE OPERATION
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
24
FEATURES/OPERATIONS
Clock
AUX audio jack (if equipped)
25
Refer to the
Owner’s Manual for more details.
HHour set
MMinutes set
Light ControlInstrument panel
Brightness
control
+

Luggage storage box
Cup and Bottle holders
Right side:
Turn to unlock
Left side:
Turn to unlock
Cup holder front Cup holder rear
Bottle holder
Center
console
Front Door
Power outlets
Instrument panel (12V)Center console box (12V)
The Hybrid System must be in “ACC” or “IGON.”
P arking brake
Set: Depress
Release: Depress again
06 Prius PRG Inside 11/10/05 5:44 PM Page 24

2627
OVERVIEW
BASIC HYBRID VEHICLE OPERATION FEATURES/OPERATIONSSAFETY AND EMERGENCY FEATURES
27
SAFETY AND
EMERGENCY FEATURES
Emergency flashers
NOTE: The air vent on the right side of the rear
seatback is designed to assist in cooling the Hybrid
vehicle battery.DO NOT BLOCK OR COVER THIS
VENT , asit may cause overheating, resulting in
reduced vehicle performance.
Rear air vent
Push
If belt is fully extended, then retracted even
slightly, it cannot be reextended beyond that point,
unless fully retracted again. This feature is used to
help hold child restraint systems securely.
To find out more information about seat belts, and
how to install a child restraint system, refer to the
Owner’s Manual .
Keep as low on
hips as possible
Take up
slack
Too high
Seat belts
Move the lever to “LOCK,” allowing the door to be
opened only from the outside.
DoorsChild safety locks
Door locks
Seat beltsShoulder belt anchor
Unlock
Rear door
Squeeze lock
release to lower
Lock
Designed to provide warning when tire pressure of
any one of the tires is critically reduced while the
vehicle is moving. It must be reinitialized by
pushing and holding the “ SET” button if
indicator light remains ON or blinks, and/or after
replacing or rotating tires or wheels.
Tire Pressure Warning System reset
06 Prius PRG Inside 11/10/05 5:44 PM Page 26

28
SAFETY AND EMERGENCY FEATURES
Jump starting
Jump start terminal
Connecting jumper cables
Connect positive (red) jumper cable to the jump
start terminal.
Connect positive (red) jumper cable to the
positive (+) terminal on the booster battery.
Connect negative (black) jumper cable to the
negative () terminal on the booster battery.
Connect negative (black) jumper cable to the
recommended connecting point of the vehicle
with the discharged battery.
Depress brake pedal, and press “POWER” button
to start the vehicle.
Refer to the Owner’s Manual for more details.
The jump start terminal is in the fuse box. To access
the terminal, open the fuse block cover and the
jump start terminal cover.
Recommended
connecting point
Exclusive jump
starting
terminal cover
06 Prius PRG Inside 11/10/05 5:44 PM Page 28