2006 SUZUKI SWIFT ect

[x] Cancel search: ect

Page 483 of 1496

SUZUKI SWIFT 2006 2.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine Drive Shaft / Axle:  3A-5
8) Disconnect front suspension control arm ball joint 
stud from steering knuckle.
9) Pull out drive shaft joint as f

Page 486 of 1496

SUZUKI SWIFT 2006 2.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine 3A-8 Drive Shaft / Axle: 
Reassembly
Tripod joint
Judging from abnormality noted before disassembly and 
what is found through visual check of

Page 487 of 1496

SUZUKI SWIFT 2006 2.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine Drive Shaft / Axle:  3A-9
7) Fasten boot bands (1) securely using special tool as 
shown in figure.
Distance “a”
: 2.6 ±  1.4 mm (0.102 ±

Page 489 of 1496

SUZUKI SWIFT 2006 2.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine Drive Shaft / Axle:  3A-11
DOJ
Judging from abnormality noted before disassembly and 
what is found through visual check of components parts 
a

Page 492 of 1496

SUZUKI SWIFT 2006 2.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine 3A-14 Drive Shaft / Axle: 
Center Shaft and Center Bearing Support 
Disassembly and Reassembly
S7RS0B3106005
Disassembly1) Remove snap ring and

Page 493 of 1496

SUZUKI SWIFT 2006 2.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine Drive Shaft / Axle:  3A-15
Specifications
Tightening Torque SpecificationsS7RS0B3107001
NOTE
The specified tightening torque is also described

Page 495 of 1496

SUZUKI SWIFT 2006 2.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine Table of Contents 4- i
4
Section 4
CONTENTS
Brakes
Precautions ................................................. 4-1
Precautions...............

Page 496 of 1496

SUZUKI SWIFT 2006 2.G Service Workshop Manual Downloaded from www.Manualslib.com manuals search engine 4-ii Table of Contents
Repair Instructions ..............................................4D-2Parking Brake Inspection and Adjustment ..........