2006 SUBARU LEGACY check engine

[x] Cancel search: check engine

Page 284 of 425

SUBARU LEGACY 2006 4.G Owners Manual Driving tips 8-5
Driving tips for AWD vehicles
All-Wheel Drive distributes the engine 
power to all four wheels. AWD vehicles provide better traction when driving on 
slippery, wet or snow-covered roa

Page 285 of 425

SUBARU LEGACY 2006 4.G Owners Manual 8-6 Driving tips
Off road driving
�TAll AWD models except OUTBACK
Your AWD vehicle is neither a convention- 
al off-road vehicle nor an all terrain vehi-
cle. It is a passenger car designed prima- 
ri

Page 286 of 425

SUBARU LEGACY 2006 4.G Owners Manual Driving tips 8-7
– CONTINUED  –
ground from under your tires, resulting in 
possible loss of traction and even vehicle 
rollover.�y
Always check your brakes for effective-
ness immediately after d

Page 287 of 425

SUBARU LEGACY 2006 4.G Owners Manual 8-8 Driving tips
squirting them with deicer or glycerin. 
Forcing a frozen door open may damage 
or separate the ru bber weather strips
around the door. If the door is frozen, use 
hot water to melt t

Page 306 of 425

SUBARU LEGACY 2006 4.G Owners Manual Driving tips 8-27
– CONTINUED  –
�T
Before starting out on a trip
�y Check that the vehicle and vehicle-to-
hitch mounting are in good condition. If 
any problems are apparent, do not tow thetrail

Page 319 of 425

SUBARU LEGACY 2006 4.G Owners Manual 9-12 In case of emergency
5. Start the engine of the vehicle with the 
booster battery and run it at moderate 
speed. Then start the engine of the vehi-
cle that has the discharged battery. 
6. When f

Page 323 of 425

SUBARU LEGACY 2006 4.G Owners Manual 9-16 In case of emergency
each of the jack-up reinforcements.
�„Using a flat-bed truck
This is the best way to transport your vehi- 
cle. Use the following procedures to en-
sure safe transportation

Page 334 of 425

SUBARU LEGACY 2006 4.G Owners Manual 11
Maintenance and service
Maintenance schedule  ....................................... 11-3 
Maintenance precautions  .................................. 11-3 Before checking or servicing in the engi