2006 SUBARU BAJA child lock

1-35
Seat, seatbelt and SRS airbags
– CONTINUED –
position. If it is not he ld tight and secure, the
danger of your child suffering personal injury in
the event of an accident may be increased.
1. Place the child restraint system in the seating posi-
tion on the rear seat cushion.
2. Pull the seatback locking knob and fold the seat-
back forward to see the tether anchorage on the back-
side of the seatback.
UB1134CA

1-36
Seat, seatbelt and SRS airbags
3. Connect the tether belt
hook onto the tether an-
chorage on the backside of the seatback. Take up any
slack in the tether belt after connecting it to the tether
anchorage. 4. Put the other end of the tether belt through under
the headrest.
5. Return the seatback to the locked position. Confirm
that the red mark on the locking knob is no longer vis-
ible and check that the s
eatback is securely locked by
moving it back and forth.
6. Run the lap and shoulder belt through the child re-
straint system follow ing the instructions provided by its
manufacturer.
UB1144BAUB1146BA

1-37
Seat, seatbelt and SRS airbags
– CONTINUED –
7. Insert the tongue plate into the buckle. 8. Take up the slack in the lap belt.
9. Pull out the seatbelt fully from the retractor to
change the retractor over from the Emergency Lock-
ing Retractor (ELR) to the Automatic Locking Retrac-
tor (ALR) function. Then allow the belt to rewind into
the retractor. As the belt
is rewinding, clicks will be
heard which indicate the retractor function as ALR.
10.While pushing the child rest raint into the seat cush-
ion and moving it back and forth and right and left,
tighten the seatbelt securely by taking up the slack in
the belt.
UB1145BA
UB1155BA
UB1156CA

1-39
Seat, seatbelt and SRS airbags
– CONTINUED –
3. Insert the tongue plate into the buckle. 4. Take up the slack in the lap belt.
5. Pull out the seatbelt fully from the retractor to
change the retractor over from the Emergency Lock-
ing Retractor (ELR) to the Automatic Locking Retrac-
tor (ALR) function. Then allow the belt to rewind into
the retractor. As the belt
is rewinding, clicks will be
heard which indicate the retractor function as ALR.
6. While pushing the child restraint into the seat cush-
ion and moving it back and forth and right and left,
tighten the seatbelt securely by taking up the slack in
the belt.
7. Before having a child sit in the child restraint sys-
tem, move it back and forth and right and left to check
if it is firmly secured.
UB1145BA
UB1155CA
UB1156BA

1-42
Seat, seatbelt and SRS airbags
Each lower anchorage is located where the seat cush-
ion meets the seatback.
1. Place the child restrain
t system on the rear seat
cushion.
2. Unlock the rear seatback locking knob and fold the
seatback forward to see the tether anchorages on the
backside of the seatback.
UB1133BA
UB1134CA

2-1
2
Keys and doors
Keys ............. ........................................... ....... 2-2
Key number ....................................................... 2-2
Door locks ..................................................... 2-3 Locking and unlocking from the outside ........ 2-3
Locking and unlocking from the inside .......... 2-4
Power door locking switches ...................... 2-5
Remote keyless entry system ..................... 2-7 Locking the doors ............................................. 2-8
Unlocking the doors ......................................... 2-8
Illuminated entry ............................................... 2-9
Vehicle finder function ..................................... 2-9
Sounding a panic alarm ................................... 2-9
Selecting audible signal operation .................. 2-9
Replacing the battery ....................................... 2-10
Replacing lost transmitters .............................. 2-12
Alarm system ....... .................................... ..... 2-17
System operation .............................................. 2-17
Activating and deactivating the alarm system ............................................................. 2-18
If you have accidentally triggered the alarm system ............................................................. 2-18
Arming the system ............................................ 2-18
Disarming the system ....................................... 2-21
Valet mode ......................................................... 2-21
Passive arming .................................................. 2-21
Tripped sensor identification ........................... 2-23
Shock sensors (dealer option) ........................ 2-23
Child safety locks ......................................... 2-24
Windows ........................................................ 2-25 Power windows ................................................. 2-25 Tailgate .......................................................... 2-28
License plate bracket ....................................... 2-30
Switchback door ........................................... 2-32 Switchback door indicator light ...................... 2-35
Moonroof (if equipped) ................................. 2-36 Tilting/sliding moonroof ................................... 2-36
Sun shade .......................................................... 2-37

2-4
Keys and doors
Locking without the key
1) Push the power door locking switch forward.
2) Close the door.
To lock the door from the outside without the key, ro-
tate the lock lever rearward and then close the door.
To lock the door from the outside using the power door
locking switch, push the s witch forward (“LOCK” side)
and then close the door. In this case, all closed doors
are locked at the same time.
Always make sure that all doors are locked before
leaving your vehicle.
NOTE
Make sure that you do not leave the key inside the
vehicle before locking the doors from the outside
without the key. „ Locking and unlocking from the inside
Keep all doors locked when you drive, especial-
ly when small children are in your vehicle.
Along with the proper use of seatbelts and child
restraints, locking the doors reduces the
chance of being thrown out of the vehicle in an
accident.
It also helps prevent passengers from falling
out if a door is accidentally opened, and intrud-
ers from unexpectedly opening doors and en-
tering your vehicle.
1
2
UB2024CB

2-24
Keys and doors
breaking the glass using a rescue hammer). y
The shock sensors may sense vibration like
those shown in the following and trigger the alarm
system. Select the settings of the alarm system
and shock sensors appropriately depending on
where you usually park your vehicle.
Example: Vibration from construction site
Vibration in multistory car park
Vibration from trains
y You can have the sensitivity of the shock sen-
sors adjusted to your preference by your SUBARU
dealer.Child safety locksChild safety
Locks
Always use the child safety lock whenever a
child rides in the rear seat. Serious injury could
result if a child accidentally opened the door
and fell out.
1) Lock
2) Unlock
Each rear door has a child safety lock that prevents
1 2
UB2002BB