2006 SKODA FABIA stop start

Manual tuning
Automatic tuning - SEEK You can set the frequency of a requested
station by pressing button or . The
frequency keeps changing when you keep
button or pressed. Release the button
to stop tuning. The display will show the set
frequency.
You can skip to the next available station in the
currently selected band by pressing button
or The tuner will automatically stop
when the next station is found in the desired
direction.




6
7 6Storing the stations to presets
Recalling the presets
Automatic tuning and storing of stations
AS
STORING Use buttons or to tune the station you want
to store. Press and hold (for approx. 2s)
selected preset button to memorise the
station. (The sound volume is lowered
temporarily and a beep sounds; then the
station is stored.) You can use6x6presets.
Having stored the stations using the preset
buttons , you can press any of the buttons
briefly to recall the respective station.
The automatic tuning and storage system seeks
all stations within a selected band, selects 6
stations with the strongest signal, and stores
them as presets. Press (AutoStore) button
to start the process. The display shows a
message “ ” and the sound is muted
(see picture).67
12
4 12 12If you select the band, memory
layer will include 6 stations with the strongest
signal in the FM band. As soon as the process is
complete, the FM- AS memory layer is
selected, and preset is chosen. You can switch
to other presets by pressing one of the preset
buttons .
If you select the band, memory
layer will include 6 stations with the strongest
signal in the AM band. As soon as the process is
complete, the AM- AS memory layer is
selected, and preset is chosen. You can switch
to other presets by pressing one of the preset
buttons .
Each use of the function updates and
rewrites the presets in the currently selected
band (FM- AS or AM- AS).FM FM - AS
1
AM AM - AS
1
AS 12
12
Tuning and Storing the Stations
5
Operation of the Radio
GB

SCAN function
SCAN
OK
Stopping playback
FM AM Press button to start searching through
the disc. A 10- second sample of the beginning
of each track is played. The sequence number
of the track on the disc is displayed at the same
time.
Press preset button to end the scan
mode. Current track will be played normally.
To stop disc playback and to switch on the
radio, press button or .
The last selected station will play.5
12
39Track select buttons
Seek buttons During CD playback, press button to skip
to previous track.
Press button to skip to next track. Playback
starts from the beginning of selected track.
Press and hold button or for fast rewind
or fast forward within a track of the CD. Normal
playback resumes after you release the button.



6
6
7
Operating of CD player
10
Disc ejection button (EJECT)
EJECT
NO CD Press button to eject the disc. If disc is
currently being played, playback stops and
radio is switched on. If no disc is in the drive,
is displayed.
If you do not remove ejected disc from the unit,
it will be drawn back to the unit automatically
for safety reasons.13

Your radio offers connection of a broad variety
of audio devices from pocket players to laptops,
or TV receivers. This input must be enabled in
the settings menu of your radio – see chapter
Special functions.
he external input mode to “ ” Playback
will start automatically after the source is
connected.
By pressing the
preset button repeatedly display the
screen for setting the input sensitivity in
dependence on the output level of the external
source signal.
High level, used mainly for signal
sources such as laptops.
Medium level, used for devices such
as cassette players or CD players
Low level, used for players such as
MP3.
Press the preset button to set the required
sensitivity. The indicator will show the set value. External audio source activation button:
By pressing the button repeatedly select
t
CD
AUX IN...
Input sensitivity setting:
AUX LEV 1
AUX LEV 2
.
AUX LEV 3
 2
12
12
BACK
BACK
Note By pressing preset button you return
to previous menu level.
: Your radio has no regulation of the
output level set at the external device. Please
remember that the highest playback quality
can be reached by setting a proper
combination of input sensitivity (see above)
and output level of the external signal source
usually by means of volume regulators. You
can find more information about settings
especially in the instruction manuals of such
devices.
Try to set the highest possible output level of
the connected device. Lower this level in case
of experiencing sound degradation or
distortion. This degradation does not mean a
failure of your device and may be prevented by
proper setting.
The quality of the reproduced signal depends
also on the recording.12
14
Stopping playback
FM AM To stop AUX playback and to switch on the
radio, press button or . The last
selected station will play.
Press button to return to the CD playback
mode.
CD
39
2
Connection of external audio sources*
Input activation