TYRE PRESSURE MONITOR
Fault finding - Fault Finding Chart
35B
ALP 7"Puncture: change tyre" message lights up (the wheel fills in on
the display)
NOTESNone.
Is the tyre punctured?
NO
Check the pressure in all four tyres with a
pressure gauge (fault: severely under-inflated).
NO
Is the pressure correct?
YES
Read the recommended pressures in the UCH
(PR009 to PR012)
Do the values of these parameters match the
manufacturer's recommended pressures?
NO YES
Write the recommended
pressures with command VP005
Enter recommended pressures.
Contact the Techline.
YES
UCH
Program no.: 350 and higher
Vdiag No: 48-4C-4D-4F-50
Repair the tyre
Make sure the valve seal is not damaged.
Make sure the sealing nut on the sensor is one for
valves installed on the Mégane II or Scénic II,
and not one for a Laguna II, Vel Satis or
Espace IV.
After all these checks, if the message still appears
on the instrument panel, contact your Techline.
AFTER REPAIRCarry out a complete check with the diagnostic tool.
35B-36
SSPP_V48_ALP07 /SSPP_V4C_ALP07/SSPP_V4D_ALP07/SSPP_V4F_ALP07/SSPP_V50_ALP07
Edition 4
