MULTIPLEXING
Fault finding - Fault finding chart
88B
88B-13
CHART 3Configuration chart display
NOTESFault finding chart to use if the tool loads the configuration screen at the end of the
multiplex network test.
The configuration chart is always accessible through the Configuration icon.
The RENAULT loads the configuration screen directly under the following conditions:
●MULTIPLEX NETWORK tab
–Inconsistent Network version numbers entered into the two computers that store the multiplex network
configuration.
–Inconsistent list of computers entered into the computers that store the multiplex network configuration.
–Wrong network version number entered into at least one of the two computers that store the multiplex
network configuration.
–One of the two computers that store the network version is blank (case of replaced airbag or UCH
computer).
●The COMPUTERS THAT CAN SUPPORT FAULT FINDING tab (see screen below)
–Inconsistent diagram numbers entered into the two computers that store the configuration.
–Inconsistency in the list of diagnosable computers entered into the two computers that store the list of
diagnosable computers.
–Inconsistency between the list of computers entered and the computers actually detected on the vehicle.
