Page 125 of 420
Controls, Safety, Instruments
125
Immobiliser active Have the fault remedied at an authorized Porsche dealer.
Check left cornering light Check bulb.
Check right cornering light Check bulb.
Check dipped beam Check bulb.
Check trailer lights Check bulb.
Check direction indicatorsCheck turn signal bulb.
Check brake lights Check bulb.
Check high beam Check bulb.
Check number plate light Check bulb.
Check fog lights Check bulb.
Check reversing lights Check bulb.
Check tail lights Check bulb.
Check front side lights Check bulb.
Check headlight beam adjustment Have the fault remedied at an authorized Porsche dealer.
Daytime driving lights off Daytime driving lights switch off when the engine is shut off.
Switch on lights if necessary.
Airbag faulty Have the fault remedied at an authorized Porsche dealer.
Instrument
panelMulti-purpose
displayText display Meaning/measures
Page 295 of 420

Practical Tips, Minor Repairs
295 Practical Tips, Minor Repairs
Exercise Extreme Caution
when Working on your Vehicle ..................... 296
Notes on Minor Repairs .............................. 296
Tires/Wheels ............................................. 297
Jack .......................................................... 311
Tool Kit ..................................................... 311
Lifting the Vehicle with a Lifting Platform
or Garage lift ............................................. 312
Compressor .............................................. 313
Wheel Bolts ............................................... 313
Spacers .................................................... 314
Changing Wheels........................................ 315
Flat Tire ..................................................... 316
Electrical System ....................................... 334
Battery ...................................................... 344
Emergency Starting with Jumper Cables ...... 355
Replacing the remote control battery ........... 358
Bulb Chart ................................................. 359
Replacing Bulbs ......................................... 360
Headlights ................................................. 361
Tail Light ................................................... 369
License Plate Lights................................... 371
Headlight Adjustment.................................. 372
Changing Headlights from Left
to Right-Hand Traffic ................................... 373
Towing ...................................................... 374
Page 359 of 420
Practical Tips, Minor Repairs
359
Bulb ChartExterior lights Type, rating Interior lights Type, rating
Halogen low beam H7 Interior light, front W5W
Xenon low beam and high beam D1S Reading light W5W
Side marker light, rear P21/5W Footwell light W3W
Side marker light, front W5W Glove compartment light W3W
Turn signal light, rear P21W Center console W3W
Turn signal light, front PY21W Luggage compartment light K12V10W
Brake light P21W Curb lights (doors) W3W
Halogen high beam H7 Warning lights (doors) W3W
License plate light C5W Curb light (rear lid) W5W
Fog light H11 Guard light (rear lid) W5W
Rear fog light P21/4W
Back up light P21W
Side indicator light W5W
Additional high beam H7
Cornering light H3
Page 360 of 420

360
Practical Tips, Minor Repairs
Replacing Bulbs
Warning!
Danger of short circuit.
fAlways switch off the relevant consumer when
changing bulbs.
Danger of injury. The headlights are under
high voltage when installed.
fExercise extreme caution when working in the
area of the headlights.
Risk of damage. Bulbs of a higher wattage
can damage the light housing.
fOnly use the bulbs specified in the bulb chart.
fBulbs must be clean and free from oil, grease
or fingerprints.
fNever touch bulbs with your bare hands.
Use a cloth or soft paper when replacing bulbs.
fAlways carry spare bulbs with you.
In certain countries, the carrying of spare
bulbs is mandatory.
Caution!
Risk of damage to headlights due to exces-
sive temperatures and abrasion.
fAttach no coverings (e.g. films, “stone
guards”) in the area of the headlights.
fUse soapy water only to clean light lenses and
plastic headlight lenses. In no case may chem-
ical cleaners or other volatile cleaning fluids be
used.
fTo prevent scratches, do not rub with a dry or merely moist cloth, tissue or insect sponges.
Page 363 of 420
Practical Tips, Minor Repairs
363
Location of bulbsHalogen headlight
A Bulb for turn signal
B Bulb for high beam
C Bulb for front side marker light
DBulb for low beamBi-Xenon headlight
F Bulb for turn signal
G Bulb for additional high beam
H Bulb for cornering light
I Bulb for front side marker light
J Xenon gas discharge lamp for low beam and
high beam
Page 365 of 420
Practical Tips, Minor Repairs
365
Halogen headlightChanging bulb for low beam of halogen
headlight
1. Pull off plug C.
2. Unclip securing clip D.
3. Replace defective bulb.
Note on operation
fMake sure the bulb is installed in the correct
position.
4. Reassemble in reverse order.Changing side light bulb in Halogen headlight
1. Pull the bulb holder out of lamp bracket.2. Pull bulb out of the holder (arrow).
3. Replace defective bulb.
4. Reassemble in reverse order.
Page 366 of 420
366
Practical Tips, Minor Repairs
Bi-Xenon headlightChanging Xenon gas discharge lamp for low
beam and high beam
1. Pull off holder J.
2. Unclip securing clip G.
3. Replace defective bulb H.
Note on operation
fMake sure the bulb is installed in the correct
position.
4. Reassemble in reverse order.Changing cornering light in Bi-Xenon
headlight
1. Pull plug off the bulb (arrow).
2. Unclip securing clip I.
3. Replace defective bulb.
Note on operation
fMake sure the bulb is installed in the correct
position.
4. Reassemble in reverse order.Changing bulb for front side marker light in
Bi-Xenon headlight
1. Pull the bulb holder out of lamp bracket
(arrow).
Page 367 of 420
Practical Tips, Minor Repairs
367
2. Pull bulb out of the holder (arrow).
3. Replace defective bulb.
4. Reassemble in reverse order.Changing additional high beam light
(halogen and Bi-Xenon headlights)
1. Remove cover G.2. Pull plug J off the bulb.
3. Unclip securing clip H.
4. Pull bulb I out.
5. Replace defective bulb.
Note on operation
fMake sure the bulb is installed in the correct
position.
6. Reassemble in reverse order.