2006 NISSAN QUEST warning

[x] Cancel search: warning

Page 90 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual WARNING LIGHTS
orAnti-lock brake
warning light
If the light comes on while the engine is running,
it may indicate the anti-lock brake system is not
functioning properly. Have the system checked
by a N

Page 91 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual dipstick to check the oil level. See “Engine oil” in
the “Maintenance and do-it-yourself” section of
this manual.
CAUTION
Running the engine with the engine oil
pressure warning light on could

Page 92 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual For additional information, see “Low tire pressure
warning system” in the “Starting and driving”
section and “Low tire pressure warning system”
in the “In case of emergency” section.
T

Page 93 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual Low windshield washer fluid
warning light
This light comes on when the windshield washer
fluid is at a low level. Add windshield washer fluid
as necessary. See “Window washer fluid” in the
“Main

Page 96 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual AUDIBLE REMINDERS
Brake pad wear warning
The front disc brake pads have audible wear
warnings. When a front brake pad requires re-
placement, it makes a high pitched scraping
sound when the vehicle is

Page 99 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual NOTE:
You can turn on or turn off the driving
speed dependent intermittent wiper func-
tion. Refer to “Personalized settings
menu” (vehicles with monochrome screen)
or “Vehicle electronic system

Page 100 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual WARNING
In freezing temperatures the washer solu-
tion may freeze on the window and ob-
scure your vision. Warm the rear window
with the defroster before you wash the
rear window.
CAUTION
cDo not oper

Page 103 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual Headlight beam select
s1To select the high beam function, push the
lever forward. The high beam lights come on
and the
light illuminates.
s2Pull the lever back to select the low beam.
s3Pulling and re