2006 NISSAN QUEST warning

[x] Cancel search: warning

Page 248 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual TIRE EQUIPMENT
1. SUMMER tires have a tread designed to
provide superior performance on dry pave-
ment. However, the performance of these
tires will be substantially reduced in snowy
and icy condition

Page 251 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual 6 In case of emergency
Flat tire...........................................6-2
Low tire pressure warning system................6-2
Changing a flat tire.............................6-3
Jump starting...

Page 252 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual For vehicles equipped with MichelinTPAXTtires,
the vehicle can be driven for a limited time on a
flat tire, see9Michelin PAX Tires (if so equipped)9
in the9Maintenance and do-it-yourself9section.
LOW

Page 253 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual CHANGING A FLAT TIRE
If you have a flat tire, follow the instructions be-
low.
Stopping the vehicle
1. Safely move the vehicle off the road and
away from traffic.
2. Turn on the hazard warning flasher

Page 255 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual Jacking up vehicle and removing the
damaged tire
WARNING
cNever get under the vehicle while it is
supported only by the jack. If it is nec-
essary to work under the vehicle, sup-
port it with safety s

Page 257 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual 4. Lower the vehicle slowly until the tire
touches the ground. Then, with the wheel
nut wrench, tighten the wheel nuts securely
in the sequence illustrated (
sA,sB,sC,sD,
sE) . Lower the vehicle compl

Page 258 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual cWhenever working on or near a battery,
always wear suitable eye protectors (for
example, goggles or industrial safety
spectacles) and remove rings, metal
bands, or any other jewelry. Do not lean
over

Page 259 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual cMake sure the jumper cables do not
touch moving parts in the engine com-
partment and that the cable clamps do
not contact any other metal.
5. Start the engine of the booster vehicle and
let it run f