2006 NISSAN ALTIMA battery

[x] Cancel search: battery

Page 14 of 304

NISSAN ALTIMA 2006 L31 / 3.G Owners Manual QR25DE engine
1. Power steering fluid reservoir (P. 8-15)
2. Spark plug caps (P. 8-20)
3. Brake fluid reservoir (P. 8-16)
4. Clutch fluid reservoir (M/T model)
(P. 8-16)
5. Air cleaner (P. 8-21)
6. Ba

Page 15 of 304

NISSAN ALTIMA 2006 L31 / 3.G Owners Manual VQ35DE engine
1. Power steering fluid reservoir (P. 8-15)
2. Engine oil filler cap (P. 8-9)
3. Brake fluid reservoir (P. 8-16)
4. Clutch fluid reservoir (M/T model)
(P. 8-16)
5. Air cleaner (P. 8-21)

Page 22 of 304

NISSAN ALTIMA 2006 L31 / 3.G Owners Manual Seat lifter (if so equipped for driver’s
seat)
Turn either dial to adjust the angle and height of
the seat cushion to the desired position.
FRONT POWER SEAT
ADJUSTMENT (if so equipped for
driver’s

Page 80 of 304

NISSAN ALTIMA 2006 L31 / 3.G Owners Manual VOLTMETER (if so equipped)
When the ignition key is turned to the ON posi-
tion, the voltmeter indicates the battery voltage.
When the engine is running, it indicates the gen-
erator voltage.
While cr

Page 92 of 304

NISSAN ALTIMA 2006 L31 / 3.G Owners Manual CAUTION
Use the headlights with the engine run-
ning to avoid discharging the vehicle
battery.
Autolight system (if so equipped)
The autolight system allows the headlights to be
set so they turn on an

Page 93 of 304

NISSAN ALTIMA 2006 L31 / 3.G Owners Manual NOTE:
Autolight activation sensitivity and the
time delay for autolight shutoff is adjust-
able for vehicles with navigation system.
See “Vehicle electronic systems” in the
“Display screen, heat

Page 94 of 304

NISSAN ALTIMA 2006 L31 / 3.G Owners Manual CAUTION
Even though the battery saver feature au-
tomatically turns off the headlights after a
period of time, you should turn the head-
light switch to the OFF position when the
engine is not running

Page 97 of 304

NISSAN ALTIMA 2006 L31 / 3.G Owners Manual The front seats are warmed by built-in heaters (if
so equipped) . The switches are located on the
center console.
1. Start the engine.
2. Push the low or high position of the switch,
as desired, depen
Page:   1-8 9-16 17-24 25-32 33-40 ... 48 next >