2006 Mercury Mountaineer maintenance

[x] Cancel search: maintenance

Page 253 of 344

Mercury Mountaineer 2006  Owners Manuals Power distribution box
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
fro

Page 265 of 344

Mercury Mountaineer 2006  Owners Manuals 8. Remove the jack and fully tighten
the lug nuts in the order shown.
Refer toWheel lug nut torque
specificationslater in this chapter
for the proper lug nut torque
specification.
Stowing the flat/spa

Page 278 of 344

Mercury Mountaineer 2006  Owners Manuals The CAMVAP program is a straight-forward and relatively speedy
alternative to resolve a disagreement when all other efforts to produce a
settlement have failed. This procedure is without cost to you a

Page 288 of 344

Mercury Mountaineer 2006  Owners Manuals SERVICE RECOMMENDATIONS
•Use thescheduled maintenance informationto track routine
service.
•Use only recommended fuels, lubricants, fluids and service parts
conforming to specifications.
•Your a

Page 289 of 344

Mercury Mountaineer 2006  Owners Manuals OPENING THE HOOD
1. Inside the vehicle, pull the hood
release handle located under the
bottom left corner of the instrument
panel.
2. Go to the front of the vehicle and
release the auxiliary latch tha

Page 290 of 344

Mercury Mountaineer 2006  Owners Manuals IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT
4.0L SOHC V6 engine
1. Engine oil filler cap
2. Engine oil dipstick (out of view)
3. Brake fluid reservoir
4. Power distribution box
5. Battery
6. Powe

Page 291 of 344

Mercury Mountaineer 2006  Owners Manuals 4.6L V8 engine
1. Air filter assembly
2. Engine oil filler cap
3. Engine oil dipstick
4. Brake fluid reservoir
5. Power distribution box
6. Battery
7. Power steering fluid reservoir
8. Radiator cap
9.

Page 292 of 344

Mercury Mountaineer 2006  Owners Manuals WINDSHIELD WASHER FLUID
Add fluid to fill the reservoir if the
level is low. In very cold weather, do
not fill the reservoir completely.
Only use a washer fluid that meets Ford specification WSB-M8B16