Maintenance Booklet4We want you to enjoy your Mercedes-
Benz SLR. Vehicle safety and operational
reliability are two very important factors
and to maintain them, regular
maintenance services are necessary.
We continuously strive to improve our
product, and ask for your understanding
that we reserve the right to make
changes in the required periodic
maintenance work which is required for
our vehicles.
Your Mercedes-Benz SLR comes
equipped with the Mercedes-Benz SLR
Maintenance System. The Maintenance
System tracks distance driven and the
time elapsed since your last service. The
next necessary maintenance service is
indicated in the maintenance service
indicator in the instrument cluster.
Additional work that is not calculated by
the Maintenance System is required at
each maintenance interval. Please refer
to “Additional Work to be Performed” on
page 58 for more details.Following each service, your authorized
Mercedes-Benz Center will reset the
Maintenance System service indicator by
confirming the service items performed.
!If the Maintenance System service
counter was inadvertently reset, have
a Mercedes-Benz Center correct it.
Please only reset if the proper
maintenance service has been
performed. Resetting the system
without performing the proper service
will result in engine and/or other
vehicle damage not covered by the
Mercedes-Benz Limited Warranty.
Introduction
57 Maintenance Booklet
Service
Trunk
Check fluid level, correct if necessary
Starter battery5410
Windshield washer system (including summerwash/winterwash) 8210
Check TIREFIT tire sealant expiration date4054
Service completion
Check parking brake according to specifications 4290
Perform road test - - - -
Reset maintenance service counter in instrument cluster 0042
Enter service in MaySIS- - - -
Restore customer’s vehicle settings - - - -
Vehicle inside and outside cleaning- - - -
63 Maintenance Booklet
Description of Emission System Maintenance Jobs
The composition of exhaust emissions is
influenced not only by the special emission
control equipment, but also by various en-
gine components and their adjustments.
Therefore, emission system maintenance
must include these engine components.
Some maintenance jobs are actually only
tests. They are important however, be-
cause they allow early detection of dis-
crepancies which can later lead to
increased exhaust emissions. It is general-
ly less expensive to have such items ad-
justed immediately rather than allowing
them to contribute to costly repairs. The
maintenance intervals have been deter-
mined so that the vehicle, under normal
conditions, should operate properly be-
tween services. 0101 Engine oil and filter change
Change the engine oil and oil filter every
10,000 miles. If oil consumption should in-
crease, determine the cause and take nec-
essary corrective steps. Reset the
Maintenance System counter.
0980 Replace air filter element
Under normal dust conditions, replace air
filter element approximately every 20,000
miles or 2 years. Clean air filter cover and
housing prior to removal of air filter ele-
ment.0780 Replace fuel filter
Replace the fuel filter approximately every
60,000 miles or 4 years.
1351 Check engine poly-V-belt condi-
tion
The poly-V-belt is subject to wear and ag-
ing. It must be checked for cracks and
wear at every service. Replace poly-V-belt
if necessary.
1580 Replace spark plugs
Spark plugs are subject to electrode ero-
sion and must be replaced according to
schedule on page 60, or more frequently
as may be required when subject to severe
operating conditions.
