53 Maintenance Booklet
Tire rotation
If applicable to your vehicle’s tire configuration ( page 6), tire rotation should be performed in accordance with the
tire manufacturer’s recommended intervals, or sooner at first signs of irregular (uneven) tread wear. Tire manufac-
turer’s rotation recommendations will necessitate a tire rotation at least once in between maintenance services and
at every maintenance service based on Mercedes-Benz maintenance intervals.
The first tire inspection or rotation (if applicable) ( page 17) occurring at an authorized Mercedes Center at any time up to 6,500
miles (vehicle odometer) is provided at no charge.
- - - -
Tire rotation
63 Maintenance Booklet
Description of Emission System Maintenance Jobs
The composition of exhaust emissions is
influenced not only by the special emission
control equipment, but also by various en-
gine components and their adjustments.
Therefore, emission system maintenance
must include these engine components.
Some maintenance jobs are actually only
tests. They are important however, be-
cause they allow early detection of dis-
crepancies which can later lead to
increased exhaust emissions. It is general-
ly less expensive to have such items ad-
justed immediately rather than allowing
them to contribute to costly repairs. The
maintenance intervals have been deter-
mined so that the vehicle, under normal
conditions, should operate properly be-
tween services. 0101 Engine oil and filter change
Change the engine oil and oil filter every
10,000 miles. If oil consumption should in-
crease, determine the cause and take nec-
essary corrective steps. Reset the
Maintenance System counter.
0980 Replace air filter element
Under normal dust conditions, replace air
filter element approximately every 20,000
miles or 2 years. Clean air filter cover and
housing prior to removal of air filter ele-
ment.0780 Replace fuel filter
Replace the fuel filter approximately every
60,000 miles or 4 years.
1351 Check engine poly-V-belt condi-
tion
The poly-V-belt is subject to wear and ag-
ing. It must be checked for cracks and
wear at every service. Replace poly-V-belt
if necessary.
1580 Replace spark plugs
Spark plugs are subject to electrode ero-
sion and must be replaced according to
schedule on page 60, or more frequently
as may be required when subject to severe
operating conditions.
