2006 MERCEDES-BENZ SLK-Class tel

117 Telephone*
Phone book
Select the phone book entry to be de-
leted from COMAND (
page 116).
Press the Delete soft key.
The delete prompt is displayed.
Use to select the menu item Yes.
Press.
The entry is deleted.
Deleting a phone book entry

118 Telephone*
SMS (Mail)
SMS messages can be received if your ve-
hicle is equipped with a telephone and
SMS messaging is available from your car-
rier.
Received messages are saved in the folder
SMS inbox.
Open the Telephone main menu
(
page 104).
Press the SMS soft key.
The folder SMS inbox appears.
i
Incoming new messages are indicated
by the symbol in the status bar.
Symbol appears in the status bar if
the SMS memory is full.
In addition, a corresponding message
is displayed when the folder is opened.
SMS inboxi
If no SMS messages have been re-
ceived the
SMS soft key is without func-
tion and therefore shaded out.

119 Telephone*
SMS (Mail)
The SMS inbox shows the list of received
messages. The list is sorted chronological-
ly, the last message received is displayed
at the top of the list.
The corresponding date and time appears
in the status bar when the selected mes-
sage has been received.
Use or  to select another mes-
sage.The SMS inbox offers the following op-
tions:
Switching between subject and sender.
Reading a message (page 120).
Deleting a message (page 120).
Switching between subject and sender
The incoming SMS can be displayed by the
sender or the subject. In the SMS inbox
(
page 118) you can either see the
Subject soft key or the Sender soft key.
Press the Subject soft key.
The first characters of the message
text(s) appears;
or
Press the Sender soft key.
The name(s) or phone number(s) of the
message sender(s) appear(s).
i
The symbol at the beginning of a list
entry indicates that the message has
not been read.
i
The sender’s number only appears if it
has been transmitted.
The sender’s name only appears if the
number and the name are stored in the
phone book (
page 114).

120 Telephone*
SMS (Mail)
In the SMS inbox (page 118),
use or  to select a message.
Press.
The message text appears.
To scroll through the message text,
press or  as required.Switching between subject and sender
You can either see the
Sender soft key or
the
Subject soft key.
Press the Sender soft key.
The sender’s name appears if it is
saved in the phone book. If not, only
the phone number appears;
or
Press the Subject soft key.
The message text appears.
To return to the SMS inbox, press the
back soft key.
In the SMS inbox (page 118),
use or to select the message
to be deleted.
Press the Delete soft key.
A delete prompt is displayed.
Use to select the menu item Yes.
Press.
The message is now deleted.
Press the Back soft key or.
This returns you to the Telephone main
menu.
Reading a messageDeleting a message
Exiting from the SMS menu

122 Navigation*
Important notes
Safety instructions
WarningG
For safety reasons, you should only enter a
destination when the vehicle is stationary.
When the vehicle is in motion, a passenger
should enter the destination. Study manual
and select route before driving.
Do not watch display screen or operate but-
tons while the vehicle is in motion - let navi-
gation announcements guide you. Stop at a
safe location before using buttons or mak-
ing corrections.
Traffic regulations always have priority over
any route recommendations given.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
The route calculated by COMAND is a rec-
ommendation on how to best reach your se-
lected destination.
During route guidance, you will not receive
any information on
Traffic lights
Stop and yield signs
Parking or stopping zones
One-way streets
Narrow bridges
Similar traffic regulation data
You should therefore always strictly observe
traffic regulations while driving. Drive care-
fully and always obey traffic laws and road
signs even if they contradict COMAND in-
structions.
WarningG
The Navigation DVD module contains a
Class 1 laser product. There is a danger of
invisible laser radiation if the cover is
opened or damaged.
Do not remove the cover. The Navigation
DVD module does not contain any parts
which can be serviced by the user. For safe-
ty reasons, have any service work which
may be necessary performed only by quali-
fied personnel.

170 Navigation*
During route guidance
Changing map orientation
Use  or to select the desired
option.
Press.
The orientation changes.
Finally, press the Back soft key or wait
for the screen to change.If you activate GPS position display and
full-screen map display (
page 156), the
following data is displayed in the status
bar:
The current position as coordinates.
The number of satellites that can cur-
rently be received.
The current elevation (ALT = altitude)
above sea level.In the Display menu (page 167),
press the
GPS soft key.
Option
On or Off appears.
i
During route guidance, a symbol will
appear on the left-hand side of the bot-
tom status bar if map display is
switched ON.
North symbol :
Fixed map orientation, north is al-
ways pointing up;
Compass symbol :
Dynamic map orientation, driving
direction is always pointing up.
Switching GPS position display
ON/OFF

187
Tele Aid*
Service

188 Service
Tele Aid*
Tele Aid* incorporates the following func-
tions:
Emergency call system
Roadside Assistance
Information
For certain emergency situations, the sys-
tem automatically triggers an emergency
call. An emergency call can also be trig-
gered manually. Refer to your vehicle Op-
erator's Manual for additional information.
If the system initiates an emergency call,
Connecting appears on the display.
During the emergency call
Call Connected
appears on the display. No operation from
COMAND is possible.Mercedes-Benz Roadside Assistance will
assist if technical problems with your vehi-
cle are experienced.
Roadside Assistance can be requested
manually. Refer to your vehicle Operator's
Manual for additional information.
Upon request of Roadside Assistance the
system initiates the call to the Mercedes-
Benz Response Center.
Connecting appears on the display.
If the connection is made, the message
Call Connected appears on the display.Even after termination of the connection,
the service may remain active for up to an-
other 5 minutes in order to transmit any re-
quired data. During this time, phone calls
cannot be made, nor can SMS messages
be received.
During activation of a roadside assistance
call, it is not possible to switch to another
application.
The transmitted data can contain, e.g., text
messages or address details of a
Mercedes-Benz Center.
Emergency call system
Roadside Assistance