Page 7 of 242

Contents
Navigation* . . . . . . . . . . . . . . . . . . . 147
Important notes . . . . . . . . . . . . . . . . . 148
Navigation DVD . . . . . . . . . . . . . . 149
Route guidance after the vehicle
has been transported . . . . . . . . . . 150
Trip interruption during
route guidance . . . . . . . . . . . . . . . 151
Navigation main menu . . . . . . . . . . . . 152
Activating the Navigation
main menu . . . . . . . . . . . . . . . . . . 152
Setting the routing mode . . . . . . . 154
Saving current location. . . . . . . . . 155
Destination input . . . . . . . . . . . . . . . . 156
Activating the Enter street menu . 156
Selecting the state/province . . . . 157
Entering destination address . . . . 158
Selecting home address . . . . . . . . 169
Displaying the compass screen . . 170
Route guidance . . . . . . . . . . . . . . . . . 173
Starting route guidance . . . . . . . . 173
Route calculation . . . . . . . . . . . . . 173Recalculating an existing route. . . 173
Voice instructions . . . . . . . . . . . . . 174
Navigation displays . . . . . . . . . . . . 175
Arriving at destination . . . . . . . . . 177
Cancelling route guidance . . . . . . 178
During route guidance . . . . . . . . . . . . 179
Displaying the soft keys . . . . . . . . 179
Info menu . . . . . . . . . . . . . . . . . . . 180
Selecting a detour . . . . . . . . . . . . 181
Stopover function . . . . . . . . . . . . . 183
Saving the current location. . . . . . 186
Defining route guidance displays . 186
Last destinations and
destination memory . . . . . . . . . . . . . . 192
Last destinations memory . . . . . . 192
Destination memory . . . . . . . . . . . 193
POIs (Points of Interest) . . . . . . . . . . . 196
Entering POIs . . . . . . . . . . . . . . . . 196
Selecting a POI on the map . . . . . 199
Entering a POI by phone number . 200
Today’s plan . . . . . . . . . . . . . . . . . . . . 202
Adding a destination
to today’s plan . . . . . . . . . . . . . . . 202
Software Updates. . . . . . . . . . . . . . . . 205Service . . . . . . . . . . . . . . . . . . . . . . . 209
Service main menu . . . . . . . . . . . . . . . 210
Activating the Service main menu 210
SMS* . . . . . . . . . . . . . . . . . . . . . . . . . 211
SMS Received list . . . . . . . . . . . . . 211
Reading SMS message received . . 212
Tele Aid*. . . . . . . . . . . . . . . . . . . . . . . 213
Emergency call system . . . . . . . . . 213
Roadside Assistance . . . . . . . . . . . 213
Information . . . . . . . . . . . . . . . . . . 214
System settings. . . . . . . . . . . . . . . . 215
System settings . . . . . . . . . . . . . . . . . 216
Selecting the time zone . . . . . . . . 216
Selecting the language . . . . . . . . . 217
Switching verification and
notification tones on and off . . . . . 218
Selecting display settings . . . . . . . 219
Selecting Voice control* settings . 220
Resetting all settings to the
factory settings . . . . . . . . . . . . . . . 223
Page 15 of 242
13 At a glance
Radio operating elements
FunctionPage
1Audio menu42
2Soft keys
(multifunction keys)
3Color display with Radio
main menu
44
41 - 0, *
Station selection
Saving stations manually
Selecting a station from
the preset memory
45
49
51
5Push the joystick to
H,h,g,G
Function selection
g and G
e.g.
Automatic seek tuning
H and h
e.g. Manual tuning
Press E to confirm
46
46
FunctionPage
6J
Muting
43
7Volume control35
8e Switching on and off34
9d and D
Automatic seek tuning
Manual tuning
46
46
Page 32 of 242
30 At a glance
Multifunction steering wheel
Satellite radio* operation
1SAT mode and preset channel number
2Channel nameTelephone* operation
List with a phone book entry
On display will appear either:
the main display with the READY
message
a list with either a phone book entry or
one of the last 10 outgoing calls
In order to close the list display,
press t.
This switches to the telephone main
display.Rear Seat Entertainment* operation
1AUX mode
Page 47 of 242
45 Audio
Radio operation
Weather Band WB
In the FM or AM Radio main menu,
press the
WB soft key.
An automatic scan is starting and the
COMAND plays and displays the
channel of the first strong WB station.
Switching back to FM or AM band
Press the FM/AM soft key.
or
Press the WB soft key
The station last tuned to will begin to
play.
Switching back to the Audio menu
Press the Back soft key.
The Weather Band WB station will con-
tinue to play.You can use the following functions:
Automatic seek tuning (page 46)
Manual tuning (page 46)
Station selection from the preset menu
(
page 47)
Station selection via direct frequency
entry (FM, AM) (
page 46)
Automatic station scan (FM, AM)
(
page 47)
Station selection from the FM/AM
Autostore presets (
page 51)
i
With the number keys 1 - 7 i t i s p o s -
sible to choose a channel.
The message
No channel will appear
if the system could not detect a chan-
nel.
Selecting a station
Page 49 of 242

47 Audio
Radio operation
Enter the desired frequency with the
number keys within 8 seconds, e.g.
1027 for 102.7 MHz.
The station you have selected will
begin to play.
FM, AM band
Entries outside the frequency range are
not accepted. The message
Please
observe frequency range 87.7 -
107.9 MHz
will appear briefly.Preset station selection via number
keypad
FM- and AM-Bands
Press one of the number keys, such as
2 briefly.
The radio will tune to the frequency as-
signed to that memory location. If none
has been set by you, the radio will not
change the station.Automatic station scan (FM, AM)
The stations on the same band (FM, AM)
can be scanned one after the other for 8
seconds each.
Start scan function
Activate the desired wave band
(
page 44).
Press the Scan soft key.
Frequency bandFrequency range
FM
AM87.7 - 107.9 MHz
530 - 1710 kHz
i
If you do not make another entry within
8 seconds, the function will be canceled
and you will continue listening to the
station last tuned to.
i
FM and AM presets are independent
and can only be accessed while in the
corresponding band.
Saving stations for FM and AM
(
page 49).
i
In the AM band, two search runs take
place. During the first run, stations with
good reception are played. During the
second run, stations with weaker
reception are played.
Page 50 of 242
48 Audio
Radio operation
The scan function will begin.End scan function and play a station
Press the Scan soft key again if you
hear the desired station.
or
The scan function stops automatically
when the first station received has been
scanned twice.You can use the following functions:
Saving stations manually (FM, AM)
Saving stations automatically FM, AM
(
page 50)
Selecting a station from the FM/AM
preset menu (
page 51)
Selecting a station from the FM/AM
Auto presets (
page 51)
Memory functions
Page 51 of 242

49 Audio
Radio operation
Saving stations manually (FM, AM)
In the Radio main menu
Activate the desired wave band
(
page 44).
Press one of the number keys, e.g. 2,
longer than 2 seconds.
You will hear a verification beep if the
beep tones option was activated in the
system settings (
page 218).
The radio saves the current station at
the memory preset selected. The me-
mory preset selected will appear in the
status bar, e.g.
FM2.On the memory list
Activate the desired wave band
(
page 44).
Press the Presets soft key.
The memory Preset menu will appear.
Push the joystick to H, h or g,
G to highlight the desired memory
preset.
Press E longer than 2 seconds.
You will hear a verification beep if the
beep tones option was activated in the
system settings (
page 218).
The current station will be saved at the
memory preset selected.
You will see the Radio main menu
automatically after 8 seconds
if you press the Back soft key.
i
There are 10 presets available (1 -
9, 0).
An existing entry is overwritten in the
memory list when a new input is given.
Page 52 of 242

50 Audio
Radio operation
Saving stations automatically (FM, AM)
Activate the desired wave band
(
page 44).
Press the Autost. soft key.
The autostore preset menu will appear.
Press E to start Begin new search.The autostore function is active. The
message
Autostore being
reloaded
will appear. The radio
stores the 10 stations with the
strongest signal. The station
frequencies available will appear in the
memory list.
i
There are 2 presets for each of the FM
and AM waveband
standard FM/AM presets (saving
stations manually) and
Auto presets (saving stations
automatically).
The standard FM/AM presets are not
affected by the Auto presets. This is a
second option for storing a station ran-
ge you are currently receiving.
i
There are max. 10 presets available (1
- 9, 0).
The autostore function assigns the sta-
tions to the memory locations in the or-
der of their reception quality. The
strongest station is available on
preset 1. The number of available
stations depends on the stations avai-
lable in the area the vehicle is operated
in.