Page 444 of 539

443 Practical hints
Replacing bulbs
Replacing bulbs
Bulbs
Safe vehicle operation depends on proper
exterior lighting and signaling. It is there-
fore essential that all bulbs and lamp as-
semblies are in good working order at all
times.
Correct headlamp adjustment is extremely
important. Have headlamps checked and
readjusted at regular intervals. See an
authorized Mercedes-Benz Light Truck
Center for headlamp adjustment.Front lamps
iSubstitute bulbs will be brought into
use when the following lamps malfunc-
tion:
Brake lamps
Parking lamps
Turn signal lamps
Tail lamps
Observe the messages in the multi-
function display (
page 418).
iIf the headlamps or front fog lamps are
fogged up on the inside as a result of
high humidity, driving the vehicle a dis-
tance with the lights on should clear up
the fogging.
Lamp
Type
1
Parking and standing
lamp
W5W
2
High beam/high
beam flasher lamp
H7 (55 W)
3
Low beam
1
1Vehicles with Bi-Xenon headlamps*: Do not re-
place the Bi-Xenon bulbs yourself. See your autho-
rized Mercedes-Benz Light Truck Center.
H7 (55 W)
Bi-Xenon*:
D2S-35 W
4
Additional turn signal
lamp
LED
5
Side marker lamp
WY 5 W
6
Turn signal lamp
3457 AK S-8
(30/2.2 cp
bulb)
7
Front fog lamp
H11 (55 W)
Page 446 of 539
445 Practical hints
Replacing bulbs
Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Light Truck Center:
Additional turn signals in the exterior
rear view mirrors
Bi-Xenon lamps*
Front fog lamps (vehicles with sport
package*)
High mounted brake lamp
Replacing bulbs for front lamps
Before you start to replace a bulb for a
front lamp, do the following first:
Turn the exterior lamp switch to
positionM (
page 138).
Open the hood (
page 326).
1Housing cover for low beam halogen or
Bi-Xenon* headlamp
2Housing cover for high beam halogen
bulb (vehicles with halogen bulbs: high
beam and high beam flasher; vehicles
with Bi-Xenon* headlamps: high beam
flasher only)
3Bulb socket for parking and standing
lamp bulb
4Bulb socket for turn signal lamp bulb
5Bulb socket for side marker lamp bulb
Page 450 of 539
449 Practical hints
Replacing bulbs
Front fog lamp
Remove front fog lamp cover (ML 350,
ML 500):
1Cover
2Front fog lamp
Use a suitable object (e.g. screwdriver)
to press on the release lever behind the
front panel.
Cover1 releases.
Pull cover1 out of the bumper.
Remove front fog lamp cover (ML 350,
ML 500 with AMG Sport Package):
1Cover
2Front fog lamp
Use a suitable object (e.g. hook or a
screwdriver) and place the hook or
screwdriver carefully between lower
end of cover and bumper.
Turn the hook or screwdriver 90°.
Hold the cover1 and pull the hook or
screwdriver outwards.
Example ML 350, ML 500 without Sport
Package; Sport Package similar3Screw
Turn the screws3 counterclockwise.
Pull the front fog lamp2 out of the
bumper.
Pull electrical connector off.
!If not done carefully and properly, dam-
age to the bumper can result. We there-
fore recommend that you have this
work carried out by an authorized
Mercedes-Benz Light Truck Center.
Page 451 of 539
450 Practical hintsReplacing bulbs4Bulb socket of front fog lamp bulb
Turn bulb socket4 with the bulb
counterclockwise and remove it.
Insert new bulb socket4 with the bulb
into the lamp and turn it clockwise.
Plug electrical connector onto the bulb
socket4.
Reinstall front fog lamp2 into the
bumper.
Reinstall cover1 into the bumper un-
til it engages.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
Turn the exterior lamp switch to
positionM (
page 138).
Open the tailgate.
Open the cover in the cargo compart-
ment.
For the driver’s side rear lamps, see
“First aid kit” (
page 430).
For the passenger-side rear lamps, see
“Fuse box in cargo compartment”
(
page 479).Vehicles without sound system*:
Remove the additional cover on the
driver’s side.
1Screw
Turn the screws1 90° counterclock-
wise and remove the storage bin.
Page 454 of 539
453 Practical hints
Replacing wiper blades
Replacing wiper blades
Removing front wiper blades
Fold wiper arm forward until it engag-
es.1Wiper blade
2Cover
3Attachment
4Tab
5Removing
Press tabs4 together and tilt wiper
blade1 to detach tabs4 on both
recesses of attachment3.
Wiper blade1 is released on one end.
Maintaining its tilted position, slide
wiper blade1 out of attachment3 in
direction of arrow5.
Installing front wiper blades
1Installing
2Tab
3Attachment
4Guide tab
5Cover
Slide the wiper blade into
attachment3 in direction of
arrow1.
Make sure guide tab4 will be placed
under cover5 when fully inserting the
wiper blade into attachment.
Warning!
G
For safety reasons, switch off wipers and
remove SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status
0) before replacing a wiper blade.
Otherwise the motor could suddenly turn on
and cause injury.
Page 511 of 539

510 IndexBrake pads
Message in display 408
Brakes 300
Warning lamp 383
Break-in period 298
Bulbs, replacing 443
Additional turn signals 443
Backup lamps 444
Brake lamps 444
Fog lamps 443
Front fog lamp 449
Front lamps 443
High beam 443
License plate lamps 444, 451
Low beam 443
Parking, standing lamp 443
Rear fog lamps 450
Rear side marker lamp bulbs 450
Side marker lamp 443
Side marker lamps 444
Turn signal lamps 443, 444C
CAC (Customer Assistance Center) 501
Calibrating
Compass 171
California
Important notice 11
Call priority
Tele Aid* 287
Calling up
Range (distance to empty) 178
Service indicator 372
CAN system 501
Capacities
Fuels, coolants, lubricants, etc. 493
Cargo compartment
Fuse box in 479
Interior lighting 145
Lamp 147
Tie-down rings 260
Cargo compartment cover* 265
Closing 265
Installing 265
Opening 265
Removing 265
Cargo tie-down rings 260Carpet
Cleaning 379
Catalytic converter 320
CD player
Operating 158
Center console 27
Lower part 28
PASS AIR BAG OFF indicator
lamp 393
Upper part 27
Central locking
Automatic 125
Switch 126
Switching on/off
(control system) 172
Unlocking from inside 126
Central locking switch 126
Certification label 484
Changing
SmartKey setting 173
Charging
Vehicle battery 469
CHECK ENGINE malfunction
indicator lamp 385, 386
Page 516 of 539

515 Index
Emergency operations
Closing tilt/sliding sunroof* 439
Locking the vehicle 436
Opening tilt/sliding sunroof* 439
Remote door unlock 288
Unlocking the vehicle 435
Emergency tensioning device see ETD
Emission control 321
Ending
A call (telephone*) 180
Engine
Message in the display 410
Starting 49
Starting with KEYLESS-GO* 50
Technical data 486
Turning off 62
Engine cleaning 376
Engine compartment
Hood 326
Main fuse box 478
Engine malfunction
indicator lamp 385, 410
Engine malfunction indicator
lamp (Canada only) 25
Engine malfunction indicator
lamp (USA only) 25Engine number 502
Engine oil 327, 495
Adding 331
Additives 495
Checking level 327
Checking with the
control system (ML 500 only) 328
Checking with the
oil dipstick (ML 350 only) 330
Consumption 327
Display messages 414–415
Messages in display 329, 414–415
Viscosity 502
ESP
®
25, 95, 502
Off-road-ESP
®
98
Switching off 97
Switching on 98
Warning lamp 387
ETD 502
Safety guidelines 70
ETD (Emergency tensioning device) 76
Exterior mirrors
Folding 197
Exterior rear view mirrors
Adjusting 44
Parking position* for 174F
Fastening the seat belts 46
First aid kit 430
Flat tire 456
Lowering the vehicle 460
Preparing the vehicle 457
Spare wheel 433
Flexible Service System PLUS
(FSS PLUS) 502
Floormats* 279
Fluid level
Automatic transmission 332
Fog lamp, rear
Switching on 142
Fog lamps
Replacing bulbs 443
Fog lamps, front
Messages in display 418
Replacing bulbs 445
Switching on 142
Folding
Exterior mirrors 197
Folding the backrest forward 261
4-ETS 98
Off-road - 4-ETS 99
Page 517 of 539

516 IndexFront air bags 71
Front fog lamps
Indicator lamp 138
Switching on 142
Front lamps
Messages in display 418
Replacing bulbs 443, 445
Front turn signal bulbs
Replacing 448
Front wiper blades
Installing 453
Removing 453
FSS Plus
(Flexible Service System PLUS) 502
Fuel 324
Additives 497
Fuel tank reserve warning lamp 388
Gasoline additives 497
Premium unleaded gasoline 324,
496
Requirements 496
Fuel additives 497Fuel cap
Message in display 416
Fuel consumption statistics
After start 177
Since last reset 177
Fuel filler flap 323
Locking 323
Opening 438
Unlocking 323
Fuel requirements 496
Fuel reserve tank
Message in display 416
Fuel tank
Filler flap 323
Fuels, coolants, lubricants etc. 493
Functions (control system) 154
Resetting 162
Fuse box
In cargo compartment 479
Fuse chart 478
Fuse extractor 478
Fuses 477
Fuse chart 478
Main fuse box 478G
Garage door opener 289
Erasing in remote control 294
Gasoline additives 497
Gasoline see Fuel
GAWR 365
GAWR (Gross Axle Weight Rating) 502
Gear range 503
Limiting 187
Shifting into optimal 190
Gear range limit
Canceling 190
Gear ranges
Automatic transmission 187
Gear selector lever
Cleaning 379
Gearshift pattern for automatic
transmission 182
Message in the display 400
Position 185
Shifting procedure 184
Global
Locking 108
Unlocking 108