2006 MERCEDES-BENZ E WAGON language

155 Controls in detail
Control system
Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position1 or as soon as the
KEYLESS-GO start/stop button* is in
position1. The control system enables you
to:

call up information about your vehicle


change vehicle settings.
For example, you can use the control sys-
tem to find out when your vehicle is next
due for service, to set the language for
messages in the instrument cluster dis-
play, and much more.
The control system relays information to
the multifunction display.
Multifunction display
1Outside temperature
2Trip odometer
3Automatic transmission program mode
4Main odometer
5Current gear selector lever position
Above illustration shows the standard dis-
play.
For more information on menus displayed
in the multifunction display, see “Menus”
(page 158).
iThe displays for the audio systems (ra-
dio, CD player) will appear in English,
regardless of the language selected.
Warning!
G
A driver’s attention to the road and traffic
conditions must always be his / her primary
focus when driving.
For your safety and the safety of others, se-
lecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions per-
mit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km / h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.

167 Controls in detail
Control system
The table below shows what settings can
be changed within the various menus.
Detailed instructions on making individual
settings can be found on the following pag-
es.INSTRUMENT CLUSTER
TIME/DATE
LIGHTING
VEHICLE
CONVENIENCE
DYNAMIC SEAT*
Select speedometer dis-
play mode
Synchronizing the
time
Set daytime running
lamp mode
(USA only)
Set automatic lock-
ing
Activate
easy-entry / exit
feature
Set level for
dynamic seat, driver
Select language
Set time (hours)
Set locator lighting
Limiting opening
height of tailgate*
Set parking position
for exterior rear
view mirror
Set level for
dynamic seat, pas-
senger
Select display (speed dis-
play or outside tempera-
ture) for status line
Set time (minutes)
Setting ambient
lighting
Select display (speed dis-
play or outside tempera-
ture) for basic display
Set date (month)
Setting headlamps
delayed shut-off
Set date (day)
Setting interior
lighting delayed
shut-off
Set date (year)

168 Controls in detailControl systemInstrument cluster submenu
Access the
Instr. cluster
submenu via
the
Settings
menu. Use the
Instr. clus-
ter
submenu to change the instrument
cluster display settings. The following
functions are available:Selecting speedometer display mode

Move the selection marker with
buttonæ orç to the
Instr.
cluster
submenu.

Press buttonj ork repeatedly
until the message
Display unit
Speed-/odometer appears in the multi-
function display.
The selection marker is on the current
setting.

Press button æ or ç to set
speedometer unit to
km or
miles
.Selecting language

Move the selection marker with
buttonæ orç to the
Instr.
cluster
submenu.

Press buttonj ork repeatedly
until the message
Language
appears in
the multifunction display.
The selection marker is on the current
setting.

Press buttonæ orç to select
the language to be used for the multi-
function display messages.
Function
Page
Select speedometer display
mode
168
Select language
168
Select display (speed display or
outside temperature) for status
display
169
Select display (speed display or
outside temperature) for basic
display
169

169 Controls in detail
Control system
Available languages:

German (
Deutsch
)


English (
English
)


French (
Français
)


Italian (
Italiano
)


Spanish (
Español
)


Dutch (
Nederlands
)


Danish (
Dansk
)


Swedish (
Svenska
)


Portuguese (
Português
)


Turkish (
Türkçe
)Selecting display (speed display or out-
side temperature) for status display

Move the selection marker with
buttonæ orç to the
Instr.
cluster
submenu.

Press buttonj ork repeatedly
until the message
Status line dis-
play
appears in the multifunction dis-
play.
The selection marker is on the current
setting.

Press buttonæ orç to select
the status line to
Speed
or
Outside
temp.
.Selecting display (speed display or out-
side temperature) for basic display

Move the selection marker with
buttonæ orç to the
Instr.
cluster
submenu.

Press buttonj ork repeatedly
until the message
Basic display
ap-
pears in the multifunction display.
The selection marker is on the current
setting.

Press buttonæ orç to select
the display permanently shown in the
multifunction display.iYou will see the status indicator when
you have called up a different display
from the standard display.

506 IndexL
Labels
Certification 468
Emission control information 468
Emission control vacuum line
routing 468
Lamp sensor
Message in display 411
Lamps, exterior
Light sensor 410, 411
Messages in display 409, 410, 411,
412
Lamps, indicator and warning
ABS 25, 372
Battery (SmartKey) 109, 115
Brakes 374
CHECK ENGINE 375
Coolant 376
Distance warning lamp* 246
Electrohydraulic brake system 96
Engine diagnostics 375
Engine malfunction 25, 375
ESP
®
25, 373
Fog lamps 146
Front passenger front air bag off 27,
72, 382Fuel reserve 25, 377
High beam headlamps 25
Instrument cluster 372, 373, 374,
375, 376, 377, 378, 380
Low beam headlamps 25
Maintenance service indicator 358
Seat belt telltale 25
Seat belts 377
SRS 66
Turn signals 25
Language, Setting 168
LATCH-type child seat anchors see Chil-
dren in the vehicle
License plate lamps 432
Messages in display 410
Replacing bulbs 436
Light alloy wheels, cleaning 367
Light sensor see Lamp sensor
Lighter see Cigarette lighter 278
Lighting
Daytime running lamp mode 144
Lighting, Exterior and interior 143
Limp Home Mode 196
Loading 260
Split rear bench seat* 260
Loading see Vehicle loadingLocator lighting 173
Lock button 493
Door handle (KEYLESS-GO*) 63
Loss of Service and Warranty Information
Booklet 467
Loss of SmartKeys 111, 118
Low beam headlamps 54
Indicator lamp 25
Messages in display 410
Replacing bulbs 432
Switching on 54
Lubricants 482
Lumbar support 133
M
Maintenance 12
Calling up service indicator 360
Clearing service indicator
message 359
FSS (Canada vehicles) 358
Maintenance System (U.S.
vehicles) 358
Resetting service indicator 361
Service indicator 358
Service indicator message 358
Service term exceeded 360

507 Index
Maintenance System (U.S. vehicles) 494
Manual headlamp mode see Headlamps
Manual shift program E 55 AMG 193
Deactivating 196
Maximum inflation pressure 351
Maximum load rating 351
Maximum loaded vehicle weight 351
Mechanical key 424
Memory function 494
Memory function see Seats
Menus see Control system menus
Messages in display see Multifunction dis-
play messages
Mirrors
Adjusting 45
Auto-dimming 197
Exterior rear view mirror 45
Exterior rear view mirror parking
positions 178, 198
Interior rear view mirror 45
MOExtended system* 340, 451
MOExtended tires* 477
MON 313
Motor Octane Number see MONMultifunction display 155, 494
Changing settings see Control system
menus and Control system sub-
menus
Selecting language 168
Multifunction display messages 385
ABS
Batteries 386, 395, 396
Brake fluid 399
Brake lamps 409
Brake pads 397
Check engine 375
Coolant 400, 401, 402
Cruise control 386
Distronic* 386
Door 403
Electrohydraulic brake system 397,
398
Engine oil 317, 404, 405, 406
ESP
®
388, 389
Fog lamps 409, 411
Fuel reserve tank 408
Headlamps 409, 410, 411
Hood 407
Key, SmartKey 408
Key, SmartKey with KEYLESS-GO* 407
Panorama roof with power tilt/sliding
panel* 414
Parking brake 398
Parking lamps 411
Power tilt/sliding sunroof* 414
Seat belts 414
SRS 415
Tailgate 416
Tele Aid 414
Telephone* 416
Tires 413
Turn signals 412
Windshield washer fluid 416
Multifunction steering wheel 26, 156,
494
Button operation 156
N
Navigation system
See separate COMAND operating
instructions 163
Net, parcel 274
Neutral gear position 186
Night security illumination 145
Normal occupant weight 351
Number, vehicle identification (VIN) 468