138 Controls in detailSeats
Pull release handle 1 and fold seat
backrest for the folding bench seat up-
ward.
3Mountings for seat belts
Hook seat belts into mountings 3.
Pull release handle 2 and fold seat
cushion for the folding bench seat into
sitting position.
Press seat cushion as far down as it will
go.
The backrest will then also engage
properly.
Fold head restraints into upright posi-
tion.Removing and installing seat cushions
Removing
1Seat guides
2Seat cushion
Fold seat cushion 2 upward and re-
move it from seat guides 1.Installing
Insert seat cushion 2 into seat guides
1 from behind 3 at a slight angle.
Fold seat cushion 2 back into original
position 4 until it engages.
iYou must remove the seat cushion
when you want to raise the loading
floor, e.g. in the event of a flat tire.
268 Controls in detailLoading
Insert one mounting element 2 into
each cargo rail.
Turn mounting element 2 in cargo rail
toN.
Insert telescoping rod 1 into mount-
ing element 2.
Turn mounting element 2 in cargo rail
until it engages in the‹ position.
You should be able to feel the mounting
element engage in the cargo rail.Storage box in cargo compartment
(Canada only)
1Storage boxWarning!
G
When you are using the storage box in the
cargo compartment, the backrests of the
seats in front of it must be completely en-
gaged to the rear, and the twin roller blind
must be installed.
Do not exceed the storage box’s maximum
load of 44 lbs (20 kg), as it could otherwise
become detached during an accident or
sharp braking maneuvers, and could injure
you or other passengers.
When leaving the vehicle, always remove the
SmartKey or the SmartKey with
KEYLESS-GO* from the starter switch, take
it with you, and lock the vehicle. Do not
leave children unattended in the vehicle, or
with access to an unlocked vehicle. Unsu-
pervised use of vehicle equipment may
cause an accident and/or serious personal
injury.
