2006 MERCEDES-BENZ CL65AMG wiper blades

Contents
DOT, Tire Identification Number
(TIN) ............................................. 304
Maximum tire load ....................... 305
Maximum tire inflation pressure .. 306
Uniform Tire Quality Grading
Standards (U.S. vehicles) ............. 306
Tire ply material ........................... 308
Tire and loading terminology ........ 309
Rotating tires ............................... 312
Winter driving .................................... 313
Winter tires .................................. 313
Block heater (Canada only) .......... 314
Snow chains................................. 314
Maintenance ...................................... 315
Maintenance service indicator
message....................................... 315
Calling up the maintenance
service indicator........................... 316
Resetting the maintenance
service indicator........................... 317
Vehicle care ....................................... 318
Cleaning and care of vehicle ........ 318
Practical hints.................................. 327
What to do if …? ................................. 328
Lamps in instrument cluster ......... 328
Lamp in center console................. 336
Vehicle status messages in
the multifunction display .............. 337
Where will I find ...? ............................ 369
First aid kit .................................... 369
Vehicle jack, vehicle tool kit,
luggage bowl, spare wheel ............ 370
Unlocking/locking in an emergency... 372
Unlocking the vehicle.................... 372
Locking the vehicle ....................... 373
Fuel filler flap ................................ 374
Opening/closing in an emergency ..... 375
Tilt/sliding sunroof ....................... 375
Replacing SmartKey batteries ............ 376
SmartKey ...................................... 376
SmartKey with KEYLESS-GO* ....... 377
Replacing bulbs .................................. 378
Bulbs ............................................. 379
Replacing bulbs for front lamps .... 381
Replacing bulbs for rear lamps ..... 382Replacing wiper blades ...................... 384
Removing wiper blades ................. 384
Installing wiper blades .................. 385
Flat tire............................................... 386
Preparing the vehicle .................... 386
Mounting the spare wheel ............ 386
Battery ............................................... 391
Disconnecting the battery ............ 392
Removing the battery ................... 392
Charging and reinstalling the
battery .......................................... 392
Reconnecting the battery ............. 393
Jump starting...................................... 394
Towing the vehicle.............................. 396
Installing towing eye bolt .............. 398
Fuses.................................................. 399
Aids for replacing fuses ................ 399
Fuse boxes in passenger
compartment ................................ 400
Fuse boxes in engine
compartment ................................ 401

54 Getting startedDrivingWindshield wipers
The combination switch is located on the
left of the steering column.Combination switch1Single wipe
Wiping with windshield washer fluid
2Switching on windshield wipers
Switch on the ignition (
page 34).Switching on windshield wipers

Turn the combination switch to the de-
sired position depending on the inten-
sity of the rain.
0Windshield wipers off
IIntermittent wiping
IINormal wiper speed
IIIFast wiper speedIntermittent wiping
Intermittent wiping interval is dependent
on wetness of windshield.

Turn the combination switch to
positionI.
After the initial wipe, pauses between
wipes are automatically controlled by the
rain sensor.
!Do not operate the windshield wipers
when the windshield is dry. Dust that
accumulates on a windshield might
scratch the glass and/or damage the
windshield wipers blades when wiping
occurs on a dry windshield. If it is nec-
essary to operate the windshield wip-
ers in dry weather conditions, always
operate the windshield wipers with
windshield washer fluid (
page 55).
!Do not leave windshield wipers in
intermittent setting when the vehicle is
taken to an automatic car wash or
during windshield cleaning. Windshield
wipers will operate in the presence of
water sprayed on the windshield, and
windshield wipers may be damaged as
a result.

273 Operation
Engine compartment
Engine compartment
Hood
Opening
The hood lock release lever is located in
the driver’s footwell to the left of the park-
ing brake pedal.
1Release lever

Pull release lever 1 in the direction of
arrow.
The hood is unlocked and handle 2
will extend out of the radiator grille.
2Handle for opening the hood

Pull handle 2 to its stop out of radiator
grille.

Pull up on the hood (do not pull up on
the handle) and then release it.
The hood will be automatically held
open at shoulder height.
Warning!
G
Do not pull the release lever while the vehi-
cle is in motion. Otherwise the hood could
be forced open by passing air flow.
!To avoid damage to the windshield wip-
ers or hood, never open the hood if the
wiper arms are folded forward away
from the windshield.
Warning!
G
To help prevent personal injury, stay clear of
moving parts when the hood is open and the
engine is running. Make sure the hood is
properly closed before driving. When closing
the hood, use extreme caution not to catch
hands or fingers.
The radiator fan may continue to run for ap-
proximately 30 seconds or even restart af-
ter the engine has been turned off. Stay
clear of fan blades.


323 Operation
Vehicle care
Cleaning the windows and the wiper
blades
Switch on the ignition (
page 34).

Turn combination switch to wiper
settingII (
page 54).

With wiper arms in vertical position,
switch off the ignition (
page 384).

Fold the wiper arms forward until they
snap into place.

Clean the wiper blade inserts with a
clean cloth and detergent solution.

Use a soft, clean cloth and a mild win-
dow cleaning solution on all outside
and inside glass surfaces.
An automotive glass cleaner is recom-
mended.
!The windshield wipers must be in a ver-
tical position before folding them away
from the windshield. They could other-
wise damage the hood.
Never open the hood when the wiper
arms are folded forward.
Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status0) before cleaning the windshield the
windshield and/or the wiper blades. Other-
wise, the wiper motor could suddenly turn
on and cause injury.
!Fold the windshield wiper arms back
onto the windshield before turning the
SmartKey in the starter switch or
pressing the KEYLESS-GO* start/stop
button (vehicles with KEYLESS-GO*).
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.!To clean the window interior, do not
use a dry cloth, abrasives, solvents or
cleaners containing solvents. Do not
touch the inside of the front, rear or
side windows with hard objects such as
an ice scraper or ring. Doing so may
damage the windows.

327 Practical hints
What to do if …?
Where will I find ...?
Unlocking/locking in an emergency
Opening/closing in an emergency
Replacing SmartKey batteries
Replacing bulbs
Replacing wiper blades
Flat tire
Battery
Jump starting
Towing the vehicle
Fuses

384 Practical hintsReplacing wiper bladesWiper blades in vertical position
Removing wiper blades
Turn SmartKey in starter switch to
position1.

Turn combination switch to wiper
settingII (
page 54).

With wiper arm in vertical position, turn
SmartKey in starter switch to
position0.

Fold the wiper arm forward until it
snaps into place.

Turn the wiper blade at a right angle to
wiper arm (arrow 1).

Slide the wiper blade sideways out of
the retainer in the direction of
arrow2.
!To avoid damage to the hood, the wiper
arms should only be folded forward
when in the vertical position.
Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status0) before replacing a wiper blade.
Otherwise, the wiper motor could suddenly
turn on and cause injury.

385 Practical hints
Replacing wiper blades
Installing wiper blades
Slide the wiper blade onto wiper arm
until it locks in place.

Rotate the wiper blade into position
parallel to wiper arm.

Fold the wiper arm backward to rest on
the windshield. Make sure you hold
onto the wiper when folding the wiper
arm back.
!Never open the hood when the wiper
arm is folded forward.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.
Do not allow the wiper arms to contact
the windshield glass without a wiper
blade inserted.
Make certain that the wiper blades are
properly installed. Improperly installed
wiper blades may cause windshield
damage.
For your convenience, we recommend
that you have this work carried out by
an authorized Mercedes-Benz Center.

452 IndexW
Warning lamps see Lamps, indicator and
warning
Warning sounds
Automatic transmission (vehicles with
KEYLESS-GO*) 59
Distronic* 210, 216, 332
Exterior lamps 59, 126
Parking brake 51, 329
Parktronic* 225, 227
Seat belt telltale 68
Warranty coverage 10, 405
Washer fluid see Windshield washer fluid
Washer reservoir level 271, 282
Washing the vehicle 318
Wear pattern, Tires 312
Weights 417Wheel
Bolts 370
Change 386
Removing 389
Sizes 283
Spare 370, 371, 386
Tightening torque 390, 432
Tires and wheels 283
Window curtain air bags 68
Windows, cleaning 323
Windshield
Cleaning wiper blades 323
Defogging 188
Windshield washer fluid 282, 419, 425
Message in display 360
Mixing ratio 425
Refilling 282, 425
Reservoir level 271, 282
Wiping 55Windshield washer system 425
Windshield wipers
Replacing wiper blades 384
Winter driving 313
Block heater (Canada only) 314
Snow chains 314
Tires 313
Winter driving instructions 265
Winter tires 313
Wood trims, cleaning 325