Contents
DOT, Tire Identification Number
(TIN) ............................................. 304
Maximum tire load ....................... 305
Maximum tire inflation pressure .. 306
Uniform Tire Quality Grading
Standards (U.S. vehicles) ............. 306
Tire ply material ........................... 308
Tire and loading terminology ........ 309
Rotating tires ............................... 312
Winter driving .................................... 313
Winter tires .................................. 313
Block heater (Canada only) .......... 314
Snow chains................................. 314
Maintenance ...................................... 315
Maintenance service indicator
message....................................... 315
Calling up the maintenance
service indicator........................... 316
Resetting the maintenance
service indicator........................... 317
Vehicle care ....................................... 318
Cleaning and care of vehicle ........ 318
Practical hints.................................. 327
What to do if …? ................................. 328
Lamps in instrument cluster ......... 328
Lamp in center console................. 336
Vehicle status messages in
the multifunction display .............. 337
Where will I find ...? ............................ 369
First aid kit .................................... 369
Vehicle jack, vehicle tool kit,
luggage bowl, spare wheel ............ 370
Unlocking/locking in an emergency... 372
Unlocking the vehicle.................... 372
Locking the vehicle ....................... 373
Fuel filler flap ................................ 374
Opening/closing in an emergency ..... 375
Tilt/sliding sunroof ....................... 375
Replacing SmartKey batteries ............ 376
SmartKey ...................................... 376
SmartKey with KEYLESS-GO* ....... 377
Replacing bulbs .................................. 378
Bulbs ............................................. 379
Replacing bulbs for front lamps .... 381
Replacing bulbs for rear lamps ..... 382Replacing wiper blades ...................... 384
Removing wiper blades ................. 384
Installing wiper blades .................. 385
Flat tire............................................... 386
Preparing the vehicle .................... 386
Mounting the spare wheel ............ 386
Battery ............................................... 391
Disconnecting the battery ............ 392
Removing the battery ................... 392
Charging and reinstalling the
battery .......................................... 392
Reconnecting the battery ............. 393
Jump starting...................................... 394
Towing the vehicle.............................. 396
Installing towing eye bolt .............. 398
Fuses.................................................. 399
Aids for replacing fuses ................ 399
Fuse boxes in passenger
compartment ................................ 400
Fuse boxes in engine
compartment ................................ 401
317 Operation
Maintenance
Resetting the maintenance service indicator
In the event that the maintenance service
on your vehicle is not carried out by an au-
thorized Mercedes-Benz Center, you can
have the maintenance service indicator re-
set. The automotive maintenance facility
carrying out the maintenance service will
find the information for resetting the main-
tenance service indicator in the mainte-
nance-relevant information for your
vehicle. Such information is available from
either your authorized Mercedes-Benz
Center or directly from Mercedes-Benz
USA, LLC.
iIf the battery is disconnected, the days
of disconnection will not be included in
the count shown by the maintenance
service indicator. To arrive at the true
maintenance service deadline, you will
need to subtract these days from the
days shown in the maintenance service
indicator.
Do not confuse the maintenance ser-
vice indicator with the engine oil level
indicator N.
iIf the maintenance service indicator
was inadvertently reset, have an autho-
rized Mercedes-Benz Center correct it.
Only reset if the proper maintenance
service has been performed. Resetting
the system without performing the
proper service as called for by the
maintenance service indicator will re-
sult in engine damage and/or other ve-
hicle damage not covered by the
Mercedes-Benz Limited Warranty.
320 OperationVehicle care
Use the appropriate MB-Touch-Up
Stick for quick and provisional repairs
of minor paint damage (i.e. chips from
stones, vehicle doors, etc.).
Engine cleaning
Prior to cleaning the engine compartment,
make sure to protect electrical compo-
nents and connectors from contact with
water and cleaning agents.
Corrosion protection, such as
MB Anticorrosion Wax, should be applied
to the engine compartment after every en-
gine cleaning. Before applying, all control
linkage bushings and joints should be lu-
bricated. The poly-V-belt and all pulleys
should be protected from any wax.
Vehicle washing
In the winter, thoroughly remove all traces
of road salt as soon as possible.
When washing the vehicle underbody, do
not forget to clean the inner sides of the
wheels.Hand-wash
Do not use hot water or wash your vehicle
in direct sunlight.
Only use a mild car wash detergent,
such as Mercedes-Benz approved Car
Shampoo.
Thoroughly spray the vehicle with a dif-
fused jet of water.
Direct only a very weak spray towards
the ventilation intake.
Use plenty of water and rinse the
sponge and chamois frequently.
Rinse with clean water and thoroughly
dry with a chamois.
Do not allow cleaning agents to dry on
the finish.
Automatic car wash
You can have your car washed in an auto-
matic car wash from the start. Automatic
car washes without brushes are prefera-
ble.
If the vehicle is very dirty, prewash it be-
fore running it through the automatic car
wash.
iVehicles with KEYLESS-GO*:
If a door handle is hit by a strong jet of
water, and a SmartKey with
KEYLESS-GO* is in close proximity, i.e.
within approximately 3 ft (approxi-
mately 1 m), the vehicle could be inad-
vertently locked or unlocked.
327 Practical hints
What to do if …?
Where will I find ...?
Unlocking/locking in an emergency
Opening/closing in an emergency
Replacing SmartKey batteries
Replacing bulbs
Replacing wiper blades
Flat tire
Battery
Jump starting
Towing the vehicle
Fuses
370 Practical hintsWhere will I find ...?Vehicle jack, vehicle tool kit, luggage bowl, spare wheel
The spare wheel, the vehicle tool kit and
the luggage bowl are stored in the com-
partment underneath the trunk floor.
1Vehicle jack
2Vehicle tool kit
3Luggage bowl
4Spare wheel
Lift up trunk floor cover and engage
trunk floor handle in upper edge of
trunk.
You can now remove the tools and ac-
cessories.The vehicle tool kit includes:
One interchangeable slot/Phillips
screwdriver
One towing eye bolt
One wheel bolt wrench with socket
wrench
One alignment bolt
One pair of gloves
One fuse extractor
One fuse chart for the main fuse box
Spare fusesVehicle jack
To prepare the vehicle jack for use
Remove the vehicle jack from the spare
wheel well under the trunk floor.
Push the crank handle up.
Turn the crank handle clockwise until it
engages (operational position).
!To prevent damage, always disengage
trunk floor handle from trunk edge and
lower trunk floor before closing the
trunk.
399 Practical hintsFuses
Fuses
Fuses are designed to protect the electri-
cal circuits in your vehicle from a short cir-
cuit. If a fuse is blown, the component(s)
and systems controlled by that fuse will
stop working.
The following aids are available to help you
replace fuses (
page 399):
Fuse chart
Spare fuses
Special fuse extractorYour vehicle’s electrical fuses are located
in various fuse boxes:
In the dashboard on the passenger side
(page 400)
In the rear passenger compartment un-
der the right rear seat (
page 400)
In the engine compartment on the driv-
er’s side (
page 401)
In the engine compartment on the pas-
senger side (
page 401)
Aids for replacing fuses
Fuse chart
A chart explaining fuse allocation and fuse
amperages can be found in the vehicle tool
kit in the trunk (
page 370).
Spare fuses
Spare fuses are found in the vehicle tool kit
in the trunk (
page 370).
Fuse extractor
The fuse extractor is found in the vehicle
tool kit in the trunk (
page 370).
Warning!
G
Only use fuses approved by Mercedes-Benz
and which have the specified amperage.
Using other fuses may cause an overload
and lead to a fire, or cause damage to elec-
trical components and/or systems.
!Never attempt to repair or bridge a
blown fuse. Have the cause determined
and remedied by an authorized
Mercedes-Benz Center.
400 Practical hintsFusesFuse boxes in passenger compartment
There are two fuse boxes in the in passen-
ger compartment. One fuse box is located
in the dashboard. An additional fuse box is
located in the rear passenger compart-
ment.
Fuse box in dashboard
1CoverOpening
Open the front passenger door.
Using the flat of your hand, press on
the middle of the cover1.
The edge of cover1 lifts up slightly
from the dashboard.
Insert flat, blunt object into the edge of
the cover as a lever.
Loosen cover1 from the dashboard
using lever.
Using your hands, pull cover1 in the
direction of the arrow and remove.
Closing
Hook cover1 into the opening at the
front.
Press cover1 back on until it engag-
es.Fuse box in the rear passenger
compartment
The fuse box is located in the footwell be-
low the right rear seat.
1Cover
Opening
Pull cover1 away from fuse box in the
direction of arrow.
Remove cover rearward.
Closing
Press cover back on until it engages.
!Do not use sharp objects such as a
screw driver to open the fuse box
cover1 in the dashboard, as this
could damage it.
401 Practical hintsFuses
Fuse boxes in engine compartment
There are three fuse boxes located in the
engine compartment in front of the firewall
(dividing wall between engine compart-
ment and passenger compartment):
one box on the driver’s side
two boxes on the front passenger side
Fuse box, driver’s side1Cover
2Slide
Fuse box, front passenger side1Cover
2Slide
To open, push slides2 to
symbolŒ and remove cover1.
To close, replace cover1 and press it
down and push both slides2 to
symbol‹.
Additional fuse box, front passenger side3Tabs
4Cover
To open, press tabs3 together and
remove cover4.
To close, place cover4 and push it
down until it engages.
!The cover1 must fit properly and the
slides2 must be positioned at
symbol‹, as otherwise moisture or
dirt may impair the functionality of the
fuses.
!The cover4 must fit properly, as oth-
erwise moisture or dirt may impair the
functionality of the fuses.