2006 MERCEDES-BENZ CL-Class reset

80 Satellite radio*
Satellite radio operation
Satellite radio operation
After the connection is made:
Follow the instructions given by the
operator.
The activation process may take up to
10 minutes. If it is successful, you will
see the display with the message
Acquiring Signal... (page 80)
followed by the Satellite radio main
menu (
page 80). See “Subscribing to satellite radio” for im-
portant subscription information
(
page 79).
Press
B to switch to satellite radio
operation.
When switching to Satellite radio ope-
ration, the system may have to acquire
the signal. The signal may also be inter-
rupted from time to time during opera-
tion for a variety of reasons
(
page 78) and may have to be re-
acquired. If so, you will see the above
message on the display. After the COMAND acquires the
signal, the Satellite radio main menu will
appear. The station last tuned to will begin
to play.
Satellite radio main menu
1
Program category
2 Station name
3 Memory preset selected and channel
number
i
Credit card information may be re-
quired for your application.
If a satellite receiver is not installed or
not properly installed:
The message
No Satellite Radio
will appear.
Switching on
220_SAT_Radio_US_A_2006.fm Seite 80 Mittwoch, 22. Dezember 2004 1:19 13

81
Satellite radio*
Satellite radio operation
Muting
Press
J while listening to the satel-
lite radio.
The symbol R will appear in the symbol
bar.
Press J again to resume listening to
the current station.
The symbol R will have disappeared. Satellite radio stations are split up into ca-
tegories. You can select between various
c a t e g o r i e s s u c h a s N e w s , S p o r t s N e w s a n d
Country Music, if available. The category
list is sorted alphabetically.
Selecting a program category
Use
H or h while the Satellite radio
main menu (
page 80) is being
displayed.
The previous or next program category
(alphabetical order) will appear in the
display. The station last tuned in the
new category will begin to play. You can use the following functions:
Automatic tuning
Automatic station scan (page 82)
Station selection via direct channel
entry (
page 82)
Station selection from the preset menu
(
page 84)
Automatic tuning
Use G or g while the Satellite radio
main menu is being displayed.
or
Press d or D .
The satellite radio will tune in to the nu-
merically previous or next receivable
station in the selected category.
i
You can display 2 in full:
Station information (page 84)
i
Muting will also be canceled if you
switch to an audio source, e.g. normal
radio, or if you alter the volume.
Changing the program categorySelecting a station
220_SAT_Radio_US_A_2006.fm Seite 81 Mittwoch, 22. Dezember 2004 1:19 13

83
Satellite radio*
Satellite radio operation
You can use the following functions:
Saving stations manually
Selecting a station from the Satellite
preset memory (
page 84)
Selecting a station by entering the
channel number (
page 82)
Saving station manually
In the Satellite radio main menu
Press one of the number keys, e.g.
2,
longer than 2 seconds.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
The satellite radio saves the current
station at the memory preset selected.
The memory preset selected will ap-
pear in the status line, e.g.
SAT2. On the memory list
In the Satellite radio main menu, press
the
Presets soft key.
The SAT preset memory will appear.
Use G or g to select a memory pre-
set.
Press E longer than 2 seconds.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
The satellite radio saves the current
station at the memory preset selected.
You will see the Satellite radio main menu
automatically after 8 seconds
if you press s.
Memory functions
i
There are 10 presets available.
i
An existing entry is overwritten in the
memory list when a new input is given.
220_SAT_Radio_US_A_2006.fm Seite 83 Mittwoch, 22. Dezember 2004 1:19 13

84 Satellite radio*
Satellite radio operation
Selecting a station on the memory list
In the Satellite radio main menu, press
the
Presets soft key.
The SAT preset memory will appear.
Use g or G to highlight a memory
preset.
Press E.
The Satellite radio main menu will then
appear automatically after 8 seconds,
indicating the memory preset number
in the status line.
In the Satellite radio main menu, press
the
Info soft key.
The information display will appear.
You will see (if available)
the full station name
additional program information
Press the Back soft key to switch back
to the Satellite radio main menu.Displaying information
220_SAT_Radio_US_A_2006.fm Seite 84 Mittwoch, 22. Dezember 2004 1:19 13

148 Navigation
During route guidance
You can now enter the length of the route
section to be blocked.
Press the More soft key until the
desired length is set.
Press the Less soft key to reduce the
length of the traffic jam.
Press E.
The system calculates a new route
around the blocked route section. Switching off
Activate the soft key display by
pressing any soft key (
page 144).
Press the Detour soft key.
Press
g to select Delete Detour.
Press E.
The blocked route section is deleted.
The system calculates the new route. Changing the blocked route section
Activate the soft key display
(
page 144).
Press the Detour soft key.
Use
G to select item Reset Detour.
Press E.
You can now change the length of the
route section to be blocked.
Press the More soft key until the
desired length is set.
Press the Less soft key to reduce the
length of the blocked route section.
Press E.
The system calculates a new route
around the blocked route section.
i
The route directly in front of the current
position can be blocked in the range of
0 to 6.2 miles.
220_Navigati_US_A_2006.fm Seite 148 Mittwoch, 22. Dezember 2004 1:13 13

197
System settings
System settings
Voice control system* Reset function
220_System_US_A_2006.fm Seite 197 Mittwoch, 22. Dezember 2004 1:36 13

198 System settings
System settings

System settings
Press C.
In the Service main menu, press the
System soft key.
System settings menu
In the System settings menu you can:
set date and time
switch verification and notification
tones on and off (
page 201)
adjust display settings (page 201)
activate and deactivate the Voice
control system* help window
(
page 203)
start Voice control system*
individualization (
page 203)
reset system settings (page 204) Setting date
Activating the System settings
menu Setting the date/time
i
Exact settings of date, time and current
time zone allow you:
correct navigation for
routes with time-dependent traffic
guidance
correct calculation of the expected
time of arrival
i
If time/date information is transmitted
by the GPS, you cannot set the date.
A satellite symbol is displayed on the
status bar if the system uses GPS data.
220_System_US_A_2006.fm Seite 198 Mittwoch, 22. Dezember 2004 1:36 13

204 System settings
Reset function

Reset function
Use this function to reset the current
settings of the COMAND to the factory
settings.
In the System settings menu, press the
Reset soft key.
An inquiry menu will appear. If you do not wish to reset to the factory
settings
Press
E and confirm with No.
The System settings menu will appear.
Accepting factory settings
Press H to select Yes and press E.
The inquiry menu Loss of
Data Are
You Sure You Want to Reset?
will
appear.
Press H to select Yes and press E.
The message
All Data Has Been
Reset COMAND Will Now Restart
will appear.
i
All your personal data, e.g. address
book entries, SMS messages and
destination memory entries, will be
deleted.
i
The factory settings are:
Time - Atlantic Time
Verification tone - On
Notification tone - On
Display setting - Automatic
220_System_US_A_2006.fm Seite 204 Mittwoch, 22. Dezember 2004 1:36 13