2006 MAZDA MODEL TRIBUTE ignition

DRIVER’S VIEW
Always check the Owner’s Manual for more operating information and safety features
1. Power door locks,
see Locks
2. Power window switches,
see Mirrors/Windows
3. Air vents
4. Turn signals/lighting
control lever,
see Getting Started
5. Horn/Air bag
6. Wiper/washer control
lever,
see Getting Started
7. Rear window
defogger,
see Climate Controls
8. Hazard warning
switch
Push on/off
9. Air conditioning,
see Climate Controls
10. Audio system,
see Audio Systems
11. Passenger air bag
off indicator,
see Getting Started
12. Climate control panel,
see Climate Controls
13. Auxiliary power point
14. Fuse panel
15. Parking brake lever
16. Cupholder
17. Gearshift lever (A/T)*,
see Transaxle
18. Fog lamp switch*
Press on/off; on with low
beams or parking lamps,
ignition in ON position, fog
lamps deactivate when
ignition is in OFF position
19. Cruise control*,see Getting Started
20. Tilt steering-wheel
lever
Pull release lever down,
tilt wheel up or down, push
lever up to lock
21. Hood release
handle
Pull to open partially
22. Instrument panel
lighting
To brighten/dim: Press and
hold top/bottom of switch
23. Dual power mirrors,
see Mirrors/Windows
Driver’s
View
*Denotes optional equipment
0 20406080100
120
140
160
180x1000r/min80 204060
80
100
120
7 6 5
4
3
2
1
0
F
E CH
4563
19
19212223
13
1820
9731038
1211
1 2 D N R P
14
16
1715
21Getting Started
Tribute Quick Tips®are
designed to quickly familiarize
you with some important
features of your Tribute
This Driver’s View tab is your
index to the Quick Tips
®, locate
the item you would like to
learn more about and then
turn to the listed tab
Be sure to see the tab called
Getting Started, this section
contains important operating
tips about your Tribute
Items identified in blue text
call out important information

GETTING STARTED
Always check the Owner’s Manual for more operating information and safety features
Front wiper/washer Ignition switch must be in ACC
or ON position
Turn signal/lighting
control lever
To activate interval wipers: Push
lever down to first detent and
rotate knob (1) to desired speed
To activate wiper normal or low
speed: Push down to second detent
To activate high speed: Push
lever down to third detent
To activate washer: Pull
lever toward you
To activate mist: Push lever
up and release
OFF= Lights off
= Tail, side marker,
instrument, license
plate and parking
lights on: Rotate knob
(1) to first notch
= Tail, parking, instrument,
license plate and head-
lights on: Rotate knob
(1) to second notchRear wiper/washer OFF= Rear wipers off
= To activate rear interval
wiper: Rotate knob (2)
to first notch
ON= To activate rear normal
speed wipe: Rotate knob
(2) to second notch
= To activate rear washer:
Rotate knob (2) to third
notch and release
High beams on/off: Push lever
forward to detent/pull back
to detent
To flash high beams: Pull lever
back slightly and release
Turn signals right/left: Move
lever up/down
Cruise control*Operates above 30 mph
Press and release ON (1)
Passenger Air Bag Off
indicator
Front passenger sensing system
is designed to turn off passenger
frontal air bag when a low weight
is detected, a person of adultsize
that is sitting properly in the
To set speed:Press and release
SET ACC (3) at desired speed;
hold (3) to accelerate
To decelerate:Press and hold
CST (4), release at desired speed;
or tap brake pedal, press and
release (3) at desired speed
Incremental deceleration:Press and
release (4), each tap = minus 1 mph passenger front seat will enable
passenger frontal air bag
The sensor also turns off the
passenger front air bag and seat-
mounted side air bag* when the
passenger seat is empty to
prevent unnecessary replacement
of air bag(s) after a collision
The front passenger seat-mounted
side air bag* will be deactivated if
the sensor detects an empty seat;
otherwise, the seat-mounted side
air bag* will be enabled
Incremental acceleration:Press
and release (3), each tap = plus 1 mph
To cancel: Tap brake/clutch*
pedal or press OFF button (5)
Return to preset speed
(after braking):Press and
release RSM button (2) PASS AIR BAG OFF indicator
(1) will be illuminated to
remind you the passenger
air bag is deactivated
See Owner’s Manual for
complete details and warnings
WARNING: If PASS AIR BAG
OFF light goes on or off or
stays off unexpectedly, please
see Owner’s Manual for
various ways this system
may indicate a false reading
Getting
Started
Getting
Started
2 (Rear)
1
A/C
1
ON
OFF SET
ACC
CSTRSM1
5
2
3
4
*Denotes optional equipment
1

INSTRUMENT CLUSTER
Always check the Owner’s Manual for more operating information and safety features
WARNING LIGHTS
8. Anti-lock Brake
System (ABS)
ABS malfunction,
normal brakes only, dealer
inspection required
9. Always fasten
safety belts
10. Air bag readiness
Front or side air bag malfunction,
dealer inspection required
11. Four wheel drive
indicator*
Light blinking continuously
indicates 4WD in heat
protection mode
Light blinking intermittently
indicates 4WD system disabled,
dealer inspection required
See Transaxle12. Turn signals/hazard
warning on
13. High beams on
14. Cruise control on*,see Getting Started
15. Brake system
Parking brake on/low brake fluid
16. Overdrive off
indicator*, see Transaxle
17. Service engine soon
Dealer inspection required if
light remains on, see Owner’s
Manual
18. Engine oil pressure
warning light
19. Charging system
warning light
Dealer inspection required
20. Low fuel
Refuel as soon as possible
21. Check fuel cap
Fuel filler cap not properly
installed
22. Door ajar
23. Anti-theft on
24. Tire Pressure Monitoring
System (TPMS)*
Warning light illuminates for a
few seconds after ignition is on
If tire pressure is too high or
too low, or tire temperature is
too high, warning light will
illuminate and beeper will sound
Flashing warning light indicates
possible malfunction; dealer
inspection required
Instrument
Cluster
Instrument
Cluster
*Denotes optional equipment
GAUGES
1. Tachometer
2. Speedometer
3. Fuel gauge
16.5-gallon/62-liter tank
(2.3L and 3.0L)4. Odometer/trip odometer
selector
Press to toggle between
odometer and trip odometer
Tip: Press and hold for more
than 1 second to reset trip
odometer
5. Odometer
6. Gearshift indicator (A/T)*
7. Coolant temperature gauge
If above normal range, stop
vehicle and turn off engine, check
coolant level when safe
1312
0 20406080100
120
140
160
180
x1000r/min8
0 204060
80
100
120
7 6 5
4
3
2
1
0
F
E CH
7233620225
8
9
10
19
18
171615
4
ODO
4WD
1224111214
21
4WD

LOCKS
Always check the Owner’s Manual for more operating information and safety features
Remote keyless entry system*1. Lock
Press button; pressing again
within 3 secondscauses doors
to relock, horn to beep
2. Unlock
Press to open driver’s door;
press again within 3 seconds
to open other doors
Tip: One step unlocking
of all doors, liftgate and
liftgate glass is available
To enable one step door
unlocking, press and hold
and for 4 seconds,
parking lights flash twice;
to reset to two step door
unlocking, repeat procedure
3. Panic alarm
Press , horn sounds; press
again to stop, or turn ignition
to ON position
Functions only with ignition
in LOCK or ACC position
Liftgate
To lock/unlock: Press power
door lock button or lock/unlock
buttons on Remote Keyless
Entry System
To open liftgate window: Pull up
on right side lever, located above
license plate holder
To open liftgate: Pull up on left
side lever
WARNING: Cargo and load
capacity limited by weight
and distribution
Child-
safety locks
Located at the
edge of rear doors
To activate: Rotate
knob to
To cancel: Rotate
knob in opposite
direction
WARNINGS: Since children
may access either rear door,
child-safety locks for both rear
doors should be activated
Never leave a child in car
with key in ignition or
access to keys
Locks
Locks
*Denotes optional equipment
Manual door locks
1. Lock tab
To lock: Press lock tab
toward front
To unlock front doors: Pull
inside door handle or press
lock tab toward back
To unlock rear doors: Press
lock tab toward back
Smart unlocking system
Prevents locking yourself out of
vehicle with key in any ignition
position; driver’s door will auto-
matically unlock if locked using
power lock control on driver’s
door panel when door is open Key
Operates ignition and all locks
SecuriLock™ passive
anti-theft key
Coded chip in key activates ignition
Tip: Use key number plate to
purchase a newkey; store in
safe place
Illuminated entry system*
Press UNLOCK or PANIC button
on remote entry transmitter,
interior lights come on; lights
turn off after 25 seconds or with
ignition in ON or ACC position
Power door locks
2. Master front door lock
switch
To unlock/lock all doors: Press
/ on driver’s door switch
To lock doors without key:
With door open, press
on driver’s door switch, exit
vehicle, close doors
Manual locks override
power locks
AUTO
2
12
3
LOCK1

MIRRORS/WINDOWS
Always check the Owner’s Manual for more operating information and safety features
Mirrors/
Windows
Child-Safety
Seats
*Denotes optional equipment
Child-safety seat*
Install in rear outboard
passenger seat positions using
dual-locking mode retractorsafety
belts; see Owner’s Manual for
proper installation and seat tether
and LATCH system instructions
Passenger air bag sensing
system,see Getting Started
WARNINGS: Use age
appropriate child restraints,
see Owner’s Manual and
state or province laws
Never place rear-facing
infant-safety seat in front
passenger seat in front
of any air bag, an infant
is in serious danger of
being injured or killed
If you must install a
forward-facing child-safety
seat in the front seating
position, move vehicle seat
as far back as possible
It is strongly recommended
that you install front facing
child-safety seats in rear
seating areaRear child-safety seat
anchors
Anchors located on rear seat
cushion for securing child-safety
seat (see Owner’s Manual)
Dual locking mode lap/
shoulder belt retractor
(front passenger and all
rear belts only)
Vehicle sensitive mode:
Belt locks only on hard braking/
cornering or impacts of about
5 mph or higher
Automatic locking mode must
be used when installing child-
safety seat
To activate: Pull webbing fully out of
retractor, allow belt to retract until
click is heard; belt will only tighten
To disengage: Unbuckle belt
and allow webbing to retract
fully; for complete details
see Owner’s Manual Dual power
mirrors
To adjust left/right
mirror: Rotate control
switch (1) left/right,
tilt in direction
of desired mirror
movement
Tip: To lock mirrors in
place, move control switch
to center position
Power windows
Operate with ignition in
ON position
All windows may be controlled
from driver’s door; each passenger
door has a separate switch
2. Driver’s window
One-touch-down: Press rear
of switch firmly and release,
window goes down all
the way; tap switch again
to stop; press and hold for normal operation; press and
hold front of switch to close
3. Passenger window
switches
Press rear/front of switch
to open/close
4. Power window lockout
switch
Press right side of switch:
only driver’s window operates;
press left side of switch and all
windows function again
Tip: Power windows and
moon roof can be operated
for up to 10 minutes after
ignition key is turned off
and with doors closed,
opening door will completely
cancel this function
1
AUTO
3 2
4

TRANSAXLE
Always check the Owner’s Manual for more operating information and safety features
Transaxle
Transaxle
Automatic transaxle*
Gearshift must be in Park or
Neutral to start engine; it must
be in Park to remove ignition key
P = Park
To move gearshift from Park:
You must press firmly on the
brake pedal and the ignition
must be in the ON position
R = Reverse
Never engage Reverse when
vehicle is moving
N = Neutral
No gear is engaged; vehicle can
roll freely, even on a slight incline,
unless the brakes are applied
D (Overdrive)
For normal driving: Transaxle shifts
through four forward gears
Tip: Torque converter lock-up
improves fuel economy and
can feel like an additional gear
1 2 D
N R P
1
Manual
transaxle
Depress clutch
pedal completely
to start engine and
change gears
Stop vehicle completely before
shifting into reverseFour wheel drive (4WD)
system*†Your Tribute is equipped with a
4WD system that is always active
and requires no driver input,
Tribute’s intelligent 4WD system
monitors vehicle conditions and
will automatically adjust power
distribution between front and
rear wheels, the 4WD system is
capable of highway, off-road and
winter road conditionsDuring some extreme
off-road events the 4WD
system may go into heat
protection mode (locked
mode), this will help protect
the system, to exit heat
protection mode, stop vehicle
and let it cool down with
engine running D (Overdrive Off)
Press the overdrive switch (1) to
disengage overdrive; an indicator
light on the instrument panel
will illuminate
2 = Second
Place the gearshift lever in second
when accelerating on slippery
roads or to provide additional
engine braking on downgrades
1 = First
Provides maximum engine braking
on steep downgrades
*Denotes optional equipment†See Owner’s Manual