2006 MAZDA MODEL RX 8 tow

[x] Cancel search: tow

Page 242 of 434

MAZDA MODEL RX 8 2006  Owners Manual (in English) Black plate (242,1)
Storage Compartments
WARNING
Open Storage Boxes:
Driving with the storage boxes open is
dangerous. To reduce the possibility of
injury in an accident or a sudden stop,
keep the sto

Page 247 of 434

MAZDA MODEL RX 8 2006  Owners Manual (in English) Black plate (247,1)
7In Case of an Emergency
Helpful information on what to do in an emergency.
Parking in an Emergency ............................................................. 7-2
Parking in an

Page 248 of 434

MAZDA MODEL RX 8 2006  Owners Manual (in English) Black plate (248,1)
Parking in an Emergency
The hazard warning lights should always
be used when you stop on or near a
roadway.
The hazard warning lights warn other
drivers that your vehicle is a traf

Page 270 of 434

MAZDA MODEL RX 8 2006  Owners Manual (in English) Black plate (270,1)
8. When finished, carefully disconnect the
cables in the reverse order described in
Step 6.
NOTE
Verify that the engine cover is securely
installed.
Push-Starting
WARNING
Towing a

Page 271 of 434

MAZDA MODEL RX 8 2006  Owners Manual (in English) Black plate (271,1)
Towing Description
We recommend that towing be done only
by an Authorized Mazda Dealer or a
commercial tow-truck service.
Proper lifting and towing are necessary to
prevent damage

Page 272 of 434

MAZDA MODEL RX 8 2006  Owners Manual (in English) Black plate (272,1)
Tiedown Hooks
CAUTION
Dont use the tiedown hooks under the
front and rear for towing.
They are designed ONLY for tying
down the vehicle when its being
transported. Using them for

Page 273 of 434

MAZDA MODEL RX 8 2006  Owners Manual (in English) Black plate (273,1)
4. Hook the tying rope to the tiedown
eyelet.
Front
Rear
CAUTION
If the tiedown eyelet is not securely
tightened, it may loosen or disengage
from the bumper when tying down the
veh

Page 297 of 434

MAZDA MODEL RX 8 2006  Owners Manual (in English) Black plate (297,1)
2. Hold the end of the rubber and pull
until the tabs are free of the metal
support.
Metal support
Ta b
3. Remove the metal stiffeners from the
blade rubber and install them in new
Page:   < prev 1-8 9-16 17-24 25-32 33-40 next >