2006 MAZDA MODEL MX-5 display

INSTRUMENT CLUSTER
Always check the Owner’s Manual for more operating information and safety features
Instrument
Cluster
Instrument
Cluster
CHE F
LF
A0.08
781011
433
16x1000r/min
P
80 1 2 345
6
7
R
N
D
M
9
2
0 20 406080100
120
140
240 80
60
40
20
0220 100200 120180 140160
km/hmph
5
GAUGES AND CONTROLS
1. Dashboard illumination
control, Rotate to dim/brighten
2. Tachometer
Avoid red zone
3. Turn signal/hazard
warning on
4. Engine oil pressure gauge
If outside normal range,
stop vehicle safely and turn
off engine, check oil level
See Owner’s Manual for
scheduled maintenance
Tip: Needle fluctuates with
engine RPM, this is normal
5. Speedometer
6. Odometer/trip odometer
selector
Press to select odometer or trip
odometer A/B; press and hold
to reset selected trip odometer
• Cruise control* onAmber light: Cruise control
system activated
Green light: Cruising speed set;
see Getting Started
• High beams on,see Getting Started
• Immobilizer system on,
see Locks
• Check engine
Dealer inspection required
• Air bag readiness
If light flashes or stays on, the
air bags may not operate in an
accident; dealer inspection required
•
Brake system
Parking brake on/low brake fluid
• AT Automatic transmission
warning light*
• Charging system
Possible alternator or charging
system malfunction,dealer
inspection required
• Anti-lock Brake
System (ABS)*
Indicates ABS malfunction,
dealer inspection required
• Door ajar
• Dynamic Stability
Control* off
• Tire pressure
monitoring system*,
see Getting Started
• Always fasten seat belts
DSC
OFF
*Denotes optional equipment
WARNING LIGHTS
7. Coolant temperature
gauge
If above normal range, stop
vehicle safely and turn off
engine;check coolant level
when safe 8. Odometer/trip
odometer display
9. Shift/gear position
indicators*
10. Low fuel indicator
11. Fuel gauge
12-gallon/48-liter tank
• Flat tire warning light*
Flat tire or system malfunction,
dealer inspection required
• KEY*,see Getting Started
• TCS/DSC indicator light*
Flashes when traction control
or stability control is functioning,
steady light indicates malfunction
Enhances traction and safety
by regulating engine and
brake torque
TCS/DSC light may occasionally
flash while driving, this indicates
that the TCS/DSC was performing
a correction to help maintain
your best vehicle control, if
TCS/DSC light remains on,
see your Mazda Dealer
FLAT
TIRE

ONO
FF
DOORAUTO
LR
2
1
SWITCHES/INTERIOR LIGHTS
Always check the Owner’s Manual for more operating information and safety features
Switches/
Interior Lights
Transmission
Power windows
Operate only with ignition on
To open/close: Push down/pull
up front of switch
Press driver window button down
completely once for one touch
auto downDome light
ON = Light always on
OFF = Light always off
DOOR = Light on when
a door is open
*Denotes optional equipment
Dual power mirrors
Operates in accessory mode
or with ignition on
To adjust left/right mirror: Push
selector switch (1) left/right,
press switch (2) in direction
of desired movement
M (Sport A/T
manual shift
mode)*
Move shifter from
D to M to engage
manual shift mode,
M will be illuminated
on shift position
indicator located in the
instrument panel
Manual shifting of transmission
is achieved by moving shifter
back to upshift and forward to
downshift, move shifter from
M to D to engage automatic
shift mode
Tip: You can also shift using
steering wheel controls
To upshift: Tap either up
switch toward you
To downshift: Tap either
down switch away from you
Manual transmission
Depress clutch pedal to start
engine and change gears
Tips: Do not shift into 1st
above 20 mph or clutch
failure could occur
Resting your foot on the clutch
pedal while driving and using
the clutch to hold your vehicle
at a standstill while waiting on
a hill may reduce clutch life
Gear indicator
(A/T only)*
Illuminated numeral of gear
indicator located in the instrument
panel displays current gear in
Automatic and Manual shift modes
Automatic transmission*
P =Park
To move gearshift from Park:
Press firmly on brake pedal, then
move gearshift to gear selection
R =Reverse
N=Neutral No gear engaged
D (Overdrive)
For normal driving: Shifts through
all forward gears automaticallyP
R
N
D M
5-speed6-speed*

AM/FM STEREO/CD/MP3
Always check the Owner’s Manual for more operating information and safety features
Audio
Systems
Audio
Systems
1. Power/Volume
Press to turn on/off; rotate
to increase/decrease volume
2. LOAD
CD: When LOAD button is
pressed, CD will load and play
even if CD eject button has
been previously pressed
CD changer*: To load multiple
discs: Press and hold LOAD (2)
until beep sound is heard; insert
CD when “In” is displayed
To eject disc: Press Eject (8)
To eject specific disc: Press and
hold Eject (8) until beep sound is
heard; within five seconds press
the desired tray number 1-6 (10)
3. FM/AM
Press to turn radio on and
select between FM1/FM2/AM
station preset buttons (10)
4. CD slot
5. SAT*, Satellite ready capability
11. Reverse /Fast forward
Press to reverse/fast forward
through a track
12. Auto-Memory
Press and hold until a beep
sound is heard; system auto-
matically scans and temporarily
stores six strong stations in each
band; press again to switch to
another preset station
13. Scan
Radio: Press to sample strong
stations, press again to stop at
current station
CD/MP3: Press to play first few
seconds of each selection, press
again to stop at current selection
14. Random*
Press toplay CD/MP3selections
in random order
15. RPT
Press to replay current
CD/MP3 selection
1 DISC 2 DISC 3 RPT 4 PROG/RDM 5 6
SEEK
TRACK
APCCLOCK
DISP
ESNAUTO-MSCAN
FM/AM MEDIASAT CD
VOL PUSH POWER TUNE PUSH AUDIO CONT.
TEXT1
19
9
10
1217141513181116
356
LOAD28
47
6. CD
Press to play CD
7. Display
8. CD eject button
9. Tune/Audio/Text Control
Radio: Rotate counter-
clockwise/clockwise for lower/
higher frequency
Audio: Press to select ALC or
AudioPLT*/BASS/TREB/FADE/
BAL/BEEP
Rotate right/left to adjust
selected feature
Text*(MP3): Rotate right/left
to display titles
Tip: Automatic Level Control
(ALC) automatically adjusts
audio volume depending
on vehicle speed
10. Memory preset buttons
To set: Tune to station, press and
hold until beep sound is heard
16. DISP
CD/MP3: Press repeatedly
to scroll through displays
17. Clock
To set: With ignition
in ACC or ON position,
press top of switch (17) until
beeper sounds and time flashes;
press top of switch (18) to set
hour, press bottom of switch
(18) to set minutes, press top
of switch (17) to start clock
18. SEEK/TRACK/APC
Radio: Press to
automatically seek higher/
lower frequency
CD/MP3: Press to
select next track/beginning
of current track
19. Disc *
Press to skip to next/previous CD
/
/
*Denotes optional equipment
Tip: Insert single CD into slot, auto-loading function will
set CD and begin play without pressing LOAD button