GETTING STARTED
Always check the Owner’s Manual for more operating information and safety features
Advanced
keyless entry/
start system*
Advanced key
must be carried
by driver to
operate properly
Refer to Owner’s Manual for
additional instructions
Advanced keyless
system customization
Your authorized Mazda Dealer can
customize your system if desired
with features such as auto-lock:
After exiting the vehicle after driving,
the car will automatically lock
For additional information
on customizable features,
see Owner’s ManualPassenger’s door request switch:
Press (6) on passenger’s door;
both doors unlock simultaneously
Trunk request switch: Press (7) on
trunk lid, only trunk will open,
doors do not lock/unlock
Advanced key transmitter:
Press button (2) for driver’s
door; press again within a 3
seconds to unlock passenger’s door
Press and hold button (3)
for more than 1 secondto
open trunk
Activating panic alarmPanic alarm: Press and hold
button (4) for more than 1 second;
horn sounds, hazard warning
lights flash; to stop, press any
remote button
compartments such as glove
box or in open trunk, engine
may not start or warnings
may activate
Turning off engine
Turn start knob to ACC position
to turn engine off, push in and
turn start knob to LOCK position
Tip: Vehicle battery may be
discharged if start knob is left
in ACC position
Always put vehicle in Park (P), set
parking brake and turn start knob to
LOCK position when exiting vehicle
System operation warningsKEY indicator light flashes (green)
indicates advanced key transmitter
battery power is low
KEY indicator light illuminated
continuously (red) indicates system
malfunction, and auxiliary key
should be used, have vehicle
inspected at an Authorized Mazda
Dealer as soon as possible
Tip: When using advanced
keyless system, system will
beep as confirmation of
lock/unlock requests, system
will also beep if start knob is
left in ACC position, advanced
key has been left in vehicle or
if advanced key is removed from
vehicle while vehicle is running
For additional system operation
warnings, see Owner’s Manual
Replacing batterySee Owner’s Manual for
complete instructions
Cautions on useTo avoid damage to advanced
key, DO NOT SUBJECT to severe
impacts, liquids or place heavy
objects on advanced key or
leaving advanced key exposed
to direct sunlight or high
temperatures
See Owner’s Manual for all
cautions and warnings
Getting
Started
Getting
Started
124
5
3
*Denotes optional equipment
Starting enginePress start knob
(8); when KEY
indicator (green)
illuminates on
instrument
cluster; turn start knob (8) to
START position to start engine
Tip: Engine will not start if
trunk is open and advanced
key is placed in trunk
Auxiliary key operation
If advanced key cannot be used due
to a malfunction or dead battery,
use auxiliary key (5) to lock/unlock
doors, trunk and to start vehicle
To start vehicle: Remove start
knob cover (8) by pressing both
side release buttons (9) while
pulling; insert auxiliary key into
key cylinder and turn to start engine
Tip: Do not place advanced key
on or around dashboard, storageLocking doors
Driver’s/passenger’s door request
switch: Press (6) once on either
door to lock both doors
Advanced key transmitter:
Press button (1); pressing again
within a few seconds causes doors
to relock and horn to beep
Unlocking doors/
opening trunk
Driver’s door request switch: Press
(6) to unlock driver’s door; press
again within 3 seconds to unlock
both doors
LOCK ACC ON STARTPUSH
989
67
AM/FM STEREO/CD/MP3
Always check the Owner’s Manual for more operating information and safety features
Audio
Systems
Audio
Systems
1. Power/Volume
Press to turn on/off; rotate
to increase/decrease volume
2. LOAD
CD: When LOAD button is
pressed, CD will load and play
even if CD eject button has
been previously pressed
CD changer*: To load multiple
discs: Press and hold LOAD (2)
until beep sound is heard; insert
CD when “In” is displayed
To eject disc: Press Eject (8)
To eject specific disc: Press and
hold Eject (8) until beep sound is
heard; within five seconds press
the desired tray number 1-6 (10)
3. FM/AM
Press to turn radio on and
select between FM1/FM2/AM
station preset buttons (10)
4. CD slot
5. SAT*, Satellite ready capability
11. Reverse /Fast forward
Press to reverse/fast forward
through a track
12. Auto-Memory
Press and hold until a beep
sound is heard; system auto-
matically scans and temporarily
stores six strong stations in each
band; press again to switch to
another preset station
13. Scan
Radio: Press to sample strong
stations, press again to stop at
current station
CD/MP3: Press to play first few
seconds of each selection, press
again to stop at current selection
14. Random*
Press toplay CD/MP3selections
in random order
15. RPT
Press to replay current
CD/MP3 selection
1 DISC 2 DISC 3 RPT 4 PROG/RDM 5 6
SEEK
TRACK
APCCLOCK
DISP
ESNAUTO-MSCAN
FM/AM MEDIASAT CD
VOL PUSH POWER TUNE PUSH AUDIO CONT.
TEXT1
19
9
10
1217141513181116
356
LOAD28
47
6. CD
Press to play CD
7. Display
8. CD eject button
9. Tune/Audio/Text Control
Radio: Rotate counter-
clockwise/clockwise for lower/
higher frequency
Audio: Press to select ALC or
AudioPLT*/BASS/TREB/FADE/
BAL/BEEP
Rotate right/left to adjust
selected feature
Text*(MP3): Rotate right/left
to display titles
Tip: Automatic Level Control
(ALC) automatically adjusts
audio volume depending
on vehicle speed
10. Memory preset buttons
To set: Tune to station, press and
hold until beep sound is heard
16. DISP
CD/MP3: Press repeatedly
to scroll through displays
17. Clock
To set: With ignition
in ACC or ON position,
press top of switch (17) until
beeper sounds and time flashes;
press top of switch (18) to set
hour, press bottom of switch
(18) to set minutes, press top
of switch (17) to start clock
18. SEEK/TRACK/APC
Radio: Press to
automatically seek higher/
lower frequency
CD/MP3: Press to
select next track/beginning
of current track
19. Disc *
Press to skip to next/previous CD
/
/
*Denotes optional equipment
Tip: Insert single CD into slot, auto-loading function will
set CD and begin play without pressing LOAD button
