2006 MAZDA MODEL MAZDASPEED 6 change key battery

[x] Cancel search: change key battery

Page 74 of 354

MAZDA MODEL MAZDASPEED 6 2006  Owners Manual (in English) Black plate (74,1)
3. Insert a flathead screwdriver into the
crack and press the battery out.
4. Insert the new battery (CR2025 or
equivalent) with the positive pole (
)
facing the (
) mark on the cap

Page 85 of 354

MAZDA MODEL MAZDASPEED 6 2006  Owners Manual (in English) Black plate (85,1)
qRequest Switch Inoperable
Warning Beep
Under the following conditions, if the
request switch for a front door or the trunk
lid is pressed while the advanced key is
being carried, a

Page 86 of 354

MAZDA MODEL MAZDASPEED 6 2006  Owners Manual (in English) Black plate (86,1)
Setting Change (Function Customization)
The following function settings are possible. Settings can be changed for each registered
advanced key. These settings can only be changed by

Page 93 of 354

MAZDA MODEL MAZDASPEED 6 2006  Owners Manual (in English) Black plate (93,1)
NOTE
If it is difficult to remove the battery by
pressing with a finger, use a small
screwdriver to press out the battery.
5. Put in the new battery (CR1620 or
equivalent) with the

Page 115 of 354

MAZDA MODEL MAZDASPEED 6 2006  Owners Manual (in English) Black plate (115,1)
Immobilizer System (with
Advanced Key)
The immobilizer system allows the engine
to start only with an advanced key the
system recognizes.
If someone attempts to start the engine
wi

Page 171 of 354

MAZDA MODEL MAZDASPEED 6 2006  Owners Manual (in English) Black plate (171,1)
NOTE
The advanced key can be set so that the
KEY indicator light (green) does not
flash even if the battery power is low.
Refer to Setting Change (Function
Customization)(page 3-18