2006 Lexus GS430 instrument cluster

PICTORIAL INDEX
v
INSTRUMENT CLUSTER (Vehicles sold in U. S. A.)
G00041

PICTORIAL INDEX
vii
INSTRUMENT CLUSTER (Vehicles sold in Canada)
G00043

SWITCHES
46
HEADLIGHT SWITCH
G12001
 1U.S.A. 2Canada
To turn the lights on, twist the knob on the end of the lever.
FIRST CLICKST OP: Only the parking, tail, license plate, side
marker and instrument panel lights turn on.
SECOND CLICKSTOP: Headlights also turn on.
THIRD CLICKSTOP (”AUTO”): The headlights and all other
lights automatically turn on depending on the darkness of the
surroundings.*
NOTE:
*The operating condition or sensitivity can be changed.
Ask your Lexus dealer for details. Vehicles sold in U.S.A.: When the headlights are on, the
headlight indicator lights up in the instrument cluster.
Vehicles sold in Canada:
When the tail lights are on, the tail
light indicator lights up in the instrument cluster.
With the knob in the “AUTO” position, there may be a case
that the headlights do not turn on immediately, even when
the vehicle enters a dark place such as a tunnel or parking
lot according to lighting conditions. In this case, we
recommend you to twist the knob manually to the second
clickstop to turn on the headlights immediately.
When the headlight switch is turned to the first or second
clickstop, the brightness of the instrument cluster will be
reduced slightly unless the maximum brightness is provided by
pushing the “MAX” button.
However, the brightness of the instrument cluster will not be
reduced in daytime even when the headlight switch is turned
to first or second clickstop.

SWITCHES
48
Automatic headlight leveling system
The headlight beam level is always maintained automatically
at the proper level in all loading conditions so that your
headlights do not dazzle other road users.
If there is a problem somewhere in this system, the message
“CHECK HEADLIGHT” appears on the multi−information
display. At this time, the master warning light comes on and a
warning tone sounds. If the warning message appears, have
your vehicle checked by your Lexus dealer as soon as
possible.
Adaptive Front Lighting System (AFS)
Adaptive Front Lighting System (AFS) provides the proper
headlight beam level according to the current driving
conditions. T his system moves the headlight beam left or right
according to the turning angle of the tires. The synergy of this
system and the automatic headlight leveling system improves
visibility at the intersections and curves.
The system operates when the vehicle speed increases above
10 km/h (6 mph), and stops when the vehicle speed drops
below 10 km/h (6 mph).
The system can operate within the limited range of the tires
turning angle. If you do not want to activate the system, you can cancel
the system.
Adaptive Front Lighting System cancel switch is located in the
switch box.
G12017
Push the button to use the switch box. To cancel the
system, push the “AFS OFF” switch. To turn it on, push
it again.
When the system is canceled, the “AFS OFF” indicator lights
up in the instrument cluster.
If the system fails, the indicator light in the instrument cluster
will flash. If this occurs, have your vehicle checked by your
Lexus dealer.
After operation, be sure to close the switch box to its original
position.

SWITCHES
49
CAUTION
To reduce the chance of injury in case of an accident or
a sudden stop, keep the switch box closed when not in
use while driving.
HEADLIGHT DIMMER AND TURNSIGNAL SWITCHES
G12004
For high beam, push the lever forward. Pull it back for low
beam. For the headlight flasher, pull it further back.
A blue light in the instrument cluster indicates high beam or
headlight flasher is on.
The headlight flasher works even when the headlight switch is
off.

SWITCHES
50
G12005
For signaling turns, move the lever up or down in the
conventional manner.
The engine switch must be selected in “IG−ON” mode.
The turn signal is self −cancelling after a turn, but after a lane
change, you may have to cancel it by hand. You can also signal
a lane change by moving the turn signal lever partway and
holding it there.
If the green light in the instrument cluster flashes faster than
normal, it indicates that the front or rear turn signal bulb has
burned out. If this indicator light does not come on, the fuse
or the indicator light itself has probably failed.
FOG LIGHT SWITCH
G12006
To turn on the fog lights, twist the band of the headlight
lever to the fog light mark. They will come on only when
the headlights are on low beam.
When the fog lights are on, the indicator lights up in the
instrument cluster.

GAUGES, METERS AND SERVICE REMINDER INDICATORS
73
LIGHT SENSITIVE OPTITRONMETER
Light sensitive optitron meter reduces unwanted glare of
the instrument cluster to provide a fine view for the driver.
The meter is originally set to “AUTONorm” mode, so the
reflection of the instrument cluster is adjusted
automatically by tinting the cluster glass depending on
the lighting condition of your surroundings.
There are “AUTO” and “MANUAL” modes. To change the
mode as you like, follow the procedure below.
The reflection control switch is located in the switch box.
G13044
Push the button to use the switch box. When you push the
“MODE” switch, the present setting appears on the
multiinformation display. Push the “MODE” switch once
and then again within 6
seconds. Each time you push the button, the mode changes
in the following order:
1. “AUTO−Norm” Recommended mode . . . .
2. “AUTO−Lo” The cluster glass is tinted with the . . . . . .
surroundings darker than in “AUTO −Norm” mode.
3. “AUTO−Hi” The cluster glass is tinted with the . . . . . . .
surroundings brighter than in “AUTO −Norm” mode.
4. “MANUAL−1” The cluster glass is adjusted in deep . . . . .
tints.
5. “MANUAL−2” The cluster glass is adjusted in neutral . . . . .
tints.
6. “MANUAL−3” The cluster glass is adjusted in light . . . . .
tints.
7. “MANUAL−4” The cluster glass is not tinted, . . . . .
however, if the surroundings are very bright, it is automatically
adjusted in light tints.
The setting display goes off automatically about 6 seconds
after the “MODE” switch is pushed. The mode shown last is
set.
The cluster glass may not be tinted in “MANUAL−1”,
“MANUAL−2” or “MANUAL− 3” mode in the night or cloudy dark
day.
When the ambient temperature in the vehicle interior is low, it
may take time for the cluster glass to be tinted.
After operation, be sure to close the switch box to its original
position.

STARTING AND DRIVING
358
CAUTION
To avoid serious personal injury or an accident, observe
the following precautions.
Turn off the engine, only when the vehicle is
completely stopped.
 When you leave the vehicle, the selector lever must
be in “P” and the parking brake must be applied, or
the vehicle may suddenly move.
PARKING BRAKE
G31037
 1
U.S.A. 2Canada
To set: Hold the regular brake pedal down with your right
foot. Push down the parking brake pedal with your left
foot.
To release: Hold the regular brake pedal down with your
right foot and push the parking brake pedal with your left
foot. When you lift your left foot, the parking brake pedal
will follow it to the released position.
Before leaving your vehicle, firmly apply the parking brake.
To remind you that the parking brake is set, the parking brake
reminder light in the instrument cluster remains on until you
release the parking brake.