2006 Lexus GS430 fuse

SWITCHES
50
G12005
For signaling turns, move the lever up or down in the
conventional manner.
The engine switch must be selected in “IG−ON” mode.
The turn signal is self −cancelling after a turn, but after a lane
change, you may have to cancel it by hand. You can also signal
a lane change by moving the turn signal lever partway and
holding it there.
If the green light in the instrument cluster flashes faster than
normal, it indicates that the front or rear turn signal bulb has
burned out. If this indicator light does not come on, the fuse
or the indicator light itself has probably failed.
FOG LIGHT SWITCH
G12006
To turn on the fog lights, twist the band of the headlight
lever to the fog light mark. They will come on only when
the headlights are on low beam.
When the fog lights are on, the indicator lights up in the
instrument cluster.

INTERIOR EQUIPMENT
111
G14009a
Rear ashtray
To use the ashtray, open the cover.
When finished with your cigarette, thoroughly extinguish it in
the ashtray to prevent other cigarette butts from catching fire.
After using the ashtray, close the lid completely.
To remove the ashtray, press down on the lock spring plate and
pull it out.
CAUTION
To reduce the chance of injury in case of an accident or
sudden stop while driving, always close the ashtray
cover completely after use.
POWER OUTLET
G14010
The power outlet is designed for power supply for car
accessories.
The power outlet is located in the rear console box.
The power outlet works when “ACC” or “IG −ON” mode is
selected.
NOTICE
 To prevent the fuse from being blown, do not use the
electricity over the total vehicle capacity of
12V/120W.
 To prevent the battery from being discharged, do not
use the power outlet longer than necessary when the
engine is not running.

TOUCH SCREEN
243
(e) Receiving on the Bluetooth phone
G18023
When a call is received, this screen is displayed with a
sound. Touch “
” or push of the telephone button
to talk on the phone.
To hang up the phone:
Touch “
” or push of the telephone button again.
To refuse to receive the call: Touch “
” and hold it.
To adjust the volume of received call: Touch “–” or “+”.
On the international phone call, the party’s name may not be
displayed correctly depending on the cellular phone which you
have. (f) Talking on the Bluetooth phone
G18024
While you are talking on the phone, this screen is
displayed. You
can do the operation below on the screen.
To adjust the volume of the party’s voice: Touch “–” or “+” switch.
To hang up the phone: Touch the “
” switch or push of the telephone
button.
To mute your voice: Touch the “Mute ON” switch.
To input the Key: Touch the “0 −9” switch.

AIR CONDITIONING
262
(a) Climate control
SETTING OPERATION automatic control
G21003
1. Push the “AUTO” button.
An indicator light will illuminate to show that the automatic
operation mode has been selected.
Air flow quantity, switching of the diffusers, on−off of the air
conditioning, and switching of the air intake between
RECIRCULATED AIR and OUTSIDE AIR are automatically
adjusted. The operation status is shown by each indicator.
When one of the manual control buttons is depressed while
operating in automatic mode, the mode relevant to the
depressed button is set. Other conditions continue to be
adjusted automatically.
Push the ”OFF” button to turn the air conditioning off.
INFORMATION
 This automatic control had additional functions as
described below, when the “AUTO” button is pushed.
The fan is stopped for a little while until warm air
preparation, when outside temperature is low like a
winter season in the “Floor”, “Bilevel” or
“Floor/Windshield” air flow mode. If quick removal
for exterior frost, fog and inside fog on the windshield
is desired, use the high fan speed setting after the
“Windshield” air flow mode has been selected.
The fan is stopped few seconds until cool air
preparation, when outside temperature is high like a
summer season in the “Panel” or “Bilevel” air flow
mode.
 The internal circulation may be applied for maximum
cooling in the automatic operation mode, when
outside temperature is high like a summer season.
If fresh outside air is desired into the vehicle, push
the air intake control button to select the OUTSIDE
AIR mode.

AUDIO
291
G22010
Turn this knob to step up or down the frequency.
Your radio automatically changes to stereo reception when a
stereo broadcast is received. “ST” appears on the display. If
the signal becomes weak, the radio reduces the amount of
channel separation to prevent the weak signal from creating
noise. If the signal becomes extremely weak, the radio
switches from stereo to mono reception. In this case, “ST”
disappears from the display.(b) Presetting a station
G22004
1. Tune in the desired station.
2. Touch one of the station selector switches (16) and
hold it until a beep is heard. This sets the station to the
switch and the frequency appears on the switch.
Each switch can store AM, FM1 and FM2. To change the
preset station to a different one, follow the same procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconnection or a blown fuse.

AUDIO
297
(d) Presetting a channel
G22015
1. Tune in the desired channel.
2. Touch one of the channel selector switches (16) and
hold it until a beep is heard. This sets the channel to the
switch and the frequency appears on the switch.
Each switch can store three SAT channels. To change the
preset channel to a different one, follow the same procedure.
The preset channel memory is
cancelled when the power
source is interrupted by battery disconnection or a blown fuse. (e) Selecting a channel
Tune in the desired channel using one of the following
methods.
Preset tuning:
Touch the switch (1− 6) or push the “CH DISC
” or “ ” bu t t o n for the channel you want. The switch (1− 6)
is highlighted in green.
Manual tuning within the channel category: Turn the
“TUNE” knob. The radio will step up or down the channel.
Manual tuning within the current channel category: Push
the “SEEK TRACK
” or “ ” button. The radio will step up
or down the channel within the current channel category.
Touch the “TYPE SEEK” switch. The radio will step up the
channel within the current channel category.

G61002
INTRODUCTION
510
ENGINE COMPARTMENT OVERVIEW (GS430)
1 Engine oil filler cap
2 Engine oil level
dipstick
3 Brake fluid reservoir
4 Fuse box
5 Washer fluid tank
6 Engine coolant
reservoir
7 Electric cooling fans
8 Condenser
9 Radiator
10 Fuse box
11 Battery

G61003
INTRODUCTION
511
ENGINE COMPARTMENT OVERVIEW (GS300)
1 Engine oil level
dipstick
2 Engine oil filler cap
3 Brake fluid reservoir
4 Fuse box
5 Washer fluid tank
6 Engine coolant
reservoir
7 Electric cooling fans
8 Condenser
9 Radiator
10 Fuse box
11 Battery