2006 Lexus GS430 light

G00110
G00108
Parking, tail, license plate,
side marker and instrument
panel lights turn on.
Headlights also turn on.
Automatic light control
High beam
Headlight flasher
G00111Right or left turn
Lane change
(Right or left)
QUICK REFERENCE
5
4. HEADLIGHT AND TURN SIGNAL SWITCHES
HEADLIGHT SWITCH
 HEADLIGHT DIMMER SWITCH 
TURN SIGNAL SWITCH

KEYS AND DOORS
8
KEYS
G11007
1Electronic keys These keys will work for the doors,
trunk and can start the engine. They will not work for
glove box and trunk storage extension door. Your
dealer will need one of them to make a new key.
Before you use these keys, be sure to read “Smart access
system with push− button start” on page 10.
2
Mechanical keys These keys work for the doors,
trunk, glove box and trunk storage extension door,
but cannot start the engine.
3Key number plate Keep the plate in a safe place
such as your wallet, not in the vehicle.
Using a mechanical key
G11008
When you use the mechanical key included on the side of the
electronic key, slide the lock knob in the arrow direction and
take out the key as shown. To put the key back, slide the key
gently until it locks, paying attention to the angle and position
of the key. Be sure to put the key back when not in use.
NOTICE
When using an electronic key, observe the following
precautions:
 Do not af fix any material that cuts off electromagnetic
waves (such as a metal seal) on the electronic key.
 Do not knock the electronic key hard against other
objects.
 Do not leave the electronic key exposed to high
temperatures for a long period, such as on the
dashboard or hood under direct sunlight.

KEYS AND DOORS
11
If the electronic key battery is discharged, the entry function
and wireless remote control cannot be used. Use the
mechanical key integrated into
the electronic key by inserting
it in the door keyhole to lock or unlock doors and into the trunk
lid keyhole to unlock the trunk lid. To start the engine, see
“Starting the engine when the electronic key battery is
discharged” on page 27. In order to activate the entry function
and wireless remote control, the battery should be replaced.
For details, see “Replacing the battery” on page 33.
(a) Engine immobilizer
G11009
The engine immobilizer is a theft prevention function.
When you enter the vehicle carrying an electronic key and
press the engine switch, the electronic code in the key is
automatically checked to determine whether it
corresponds to the registered ID code for the vehicle. If
the ID code is verified, you can start the engine.
The system is automatically set when the engine switch is off.
The indicator light will start flashing to show the system is set.

KEYS AND DOORS
12If any of the following indicator conditions occurs, contact your
Lexus dealer.

The indicator light stays on except when the theft deterrent
system is setting or activating. (See “Theft deterrent
system” on page 40.)
 The indicator light does not start flashing when the engine
switch is off.
 The indicator light flashes inconsistently.
For your Lexus dealer to make you a new key with a built −in
transponder chip, your dealer will need your key number and
electronic key. However, there is a limit to the number of
additional keys your Lexus dealer can make for you.
If you make your own duplicate key, you will not be able
to cancel the function or start the engine.
NOTICE
Do not modify, remove or disassemble the engine
immobilizer. If any unauthorized changes or
modifications are made, proper operation of this
function cannot be guaranteed.
For vehicles sold in U.S.A.
FCC ID: NI4TMIMB1
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
CAUTION
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.

KEYS AND DOORS
15
ALARMS AND WARNING MESSAGES
Your Lexus is equipped with alarms inside and outside, as
well as warning messages in the multiinformation
display,
that remind you if there is a problem involving the
entry function.
Cases which are expected to happen frequently are
shown in the illustrations and the other cases are
described in the table. If an alarm or warning message
comes on, check to see what the problem is referring to
the illustrations and table, and take the appropriate
measure.
If a warning message appears, the master warning light
will blink.
G11025
 When a door is opened and closed with the engine
switch in “ACC” or “IGON” mode and with the selector
lever in the “P” position, and then the electronic key is
carried outside of the vehicle.
Inside alarm: One chime
Outside alarm: 3 beeps
Multiinformation display: “KEY IS NOT DETECTED”
See page 91 for details.

KEYS AND DOORS
19
LOCKING THE DOORS WITH ENTRY FUNCTION
G11028
When the engine switch is off and you push the lock
button on the outside door handle while carrying an
electronic key, all the doors will be locked. At this time,
one beep will sound and the turn signal lights will flash
once.
The entry function will be activated within about 1m (3ft.) from
each outside door handle.
However, when you push the lock button on the outside door
handle with any door not closed securely, a beep sounds for
10 seconds. (For details, see page 21.)
If outer foot lights are illuminated, you can turn off the lights by
pushing the lock button on the outside door handle. (For
details, see “Outer foot lights” on page 208.)
NOTICE
If the key is in the vehicle, do not perform door locking
operation, or you might lock your keys inside the
vehicle.
INFORMATION

When locking the doors, be sure to push the lock
button on the outside door handle slowly and firmly.
If you push the button quickly, the doors may not
lock.
 When opening or closing a door, do not touch the
lock button on the outside door handle.
 When an electronic key is used to lock the doors and
an electronic key is left in the effective range of the
entry function in the vehicle, the doors cannot be
unlocked using the entry function. In this case, use
the wireless remote control function to unlock the
doors.
 You cannot activate unlocking function within 3
seconds after the locking function is activated.

KEYS AND DOORS
22UNLOCKING THE DOOR(S) WITH ENTRY FUNCTION
G11032
When you take hold the back side of the outside door
handle on the driver’s door carrying an electronic key, the
driver’s door will be unlocked. When you take hold the
back
side of the outside door handle except on the driver’s
door, carrying an electronic key, all the doors will be
unlocked. At this time, two beeps will sound and turn
signal lights flash twice.
When you get close to your vehicle (about 1 m (3 ft.) from each
outside door handle), and are carrying the electronic key, the
electronic code emitted from the key is automatically checked
to determine if it corresponds to the registered ID code for the
vehicle. After this, the outer foot lights come on. (For outer foot
lights, see “Outer foot lights” on page 208.)
You can select the doors to be unlocked. For details, see
“Changing the doors to be unlocked” on page 23. When the door(s) is(are) unlock
ed, the interior lights come on
for 15 seconds if the interior light switch is in the “DOOR”
position. However, the interior lights go out when you push the
power door lock switch in the lock position or select the engine
switch in “ACC” or “IG− ON” mode. For further information, see
“Interior lights” on page 98.
You have 30 seconds to open a door after operating the
unlocking function. If a door is not opened by then, all the doors
will be automatically locked again.
INFORMATION
 When unlocking the door(s), be sure to take hold of
the back side of the outside door handle firmly as
shown in the illustration. Taking hold of the handle
with a gloved hand might cause a delay in unlocking
or may not unlock.
 When you take hold of the handle to unlock the
door(s), be sure to confirm that the door(s) has(have)
been unlocked. If the turn signal lights flash twice,
two beeps sound outside the vehicle, the doors are
unlocked. At this time, you can pull the outside door
handle to open the door. If you quickly move closer
to the vehicle or pull the outside door handle quickly,
the doors might not unlock. If you cannot open the
door by pulling the outside door handle at this time,
push it back to the original position and then pull it
out again.

KEYS AND DOORS
26BATTERY POWER SAVING
If the electronic key is left within the effective range of the
outside of the vehicle for more than 10 minutes without locking
or unlocking the doors, the entry function is disabled.
If the electronic key does not enter the effective range of the
outside of the vehicle for 4 days, the output interval of the
electromagnetic signal is extended. If this situation continues
for 14 days, the entry function is disabled.
To reactivate the entry function properly, perform any of the
following:
(a) Press the lock button on the outside door handle while
carrying the electronic key.
(b) Perform a wireless remote control function.
(c) Insert and turn the mechanical key in the keyhole of the
door.
INFORMATION

To maintain communication with the vehicle,
electronic keys use builtin battery power. The
battery service life is about 1 to 2 years on average.
If battery power becomes insufficient, replace the
battery with a new one.
 The electronic key continually receives
electromagnetic waves, and if it receives strong
electromagnetic waves over a period of time, the
battery can be drastically run down. Therefore, avoid
storing electronic keys near any electrical
appliances.
Here is a list of electrical appliances which may have
adverse effects on the electronic key performance:
TVs, personal computers, cellular phone or cordless
phone recharger units, electric light stands and
fluorescent desk lights
Note that you should always keep such electrical
appliances at least 1 m (3 ft.) away from the electronic
key.