2006 Lexus GS430 air condition

OCCUPANT RESTRAINT SYSTEMS
166
16G017
This indicator comes on when the engine switch is
selected in “IGON” mode. It goes off after about 6
seconds. This means the SRS front airbags are operating
properly.
This warning light system monitors the airbag sensor
assembly, front airbag sensors, side and curtain shield airbag
sensor assemblies, curtain shield airbag sensor assemblies,
driver’s seat position sensor, driver’s seat belt buckle switch,
occupant detection sensor, front passenger’s seat belt buckle
switch, seat belt pretensioner assemblies, inflators, warning
light, interconnecting wiring and power sources. (For details,
see “Service reminder indicators and warning buzzers” on
page 72.)If any of the following conditions occurs, this indicates a
malfunction of the airbags or seat belt pretensioners. Contact
your Lexus dealer as soon as possible.

When the engine switch is selected in “IG−ON” mode, the
light does not come on or remains on for more than 6
seconds.
 The light comes on while driving.

OCCUPANT RESTRAINT SYSTEMS
176
16G017
The indicator comes on when the engine switch is
selected in “IGON” mode. It goes off after about 6
seconds. This means the SRS side airbags and curtain
shield airbags are operating properly.
This warning light system monitors the airbag sensor
assembly, front airbag sensors, side and curtain shield airbag
sensor assemblies, curtain shield airbag sensor assemblies,
driver’s seat position sensor, driver’s seat belt buckle switch,
occupant detection sensor, front passenger’s seat belt buckle
switch, seat belt pretensioner assemblies, inflators, warning
light, interconnecting wiring and power sources. (For details,
see “Service reminder indicators and warning buzzers” on
page 72.)If any of the following conditions occurs, this indicates a
malfunction of the airbags or seat belt pretensioners. Contact
your Lexus dealer as soon as possible.

When the engine switch is selected in “IG−ON” mode, the
light does not come on or remains on for more than 6
seconds.
 The light comes on while driving.

G18042
Vehicles with Navigation system
G18043
Vehicles without Navigation system
TOUCH SCREEN
216
OVERVIEW
1 Touch screen
2 “CLIMATE” button
The air conditioning operation screen is
shown.
(See page 254 for details.)
3 “AUDIO” button
The audio operation screen is shown.
(See page 274 for details.)
4 “INFO”button
The information menu screen is shown.
(See page 218 for details.)
5 “DISP” button
The display adjustment screen is
shown.
(See page 251 for details.)

TOUCH SCREEN
222
G18005
You can use the microphone above when talking on the
phone.
The party’s voice outputs from the driver’s speaker. When the
received calls or received voice outputs, the audio from the
audio system or voice guidance from the Navigation system
will be muted.
INFORMATION
 Talk alternately with your party on the phone. If you
talk at the same time, the voice may not reach each
other. (It is not a malfunction.)
 Keep the volume of receiving voice down. Otherwise,
echo is coming up. When you talk on the phone,
speak clearly towards the microphone.
 In the following situations, your voice may not reach
the party.
Driving on unpaved road. (Making a traffic noise.)
Driving at the high speed.
The window is open.
Turning the air conditioning vents towards the
microphone.
The sound of the air conditioning fan is loud.

TOUCH SCREEN
250
Setting screen
1. Push the “INFO” button on the bezel to display the
“Information Menu” screen.
G18045
2. Touch the “Screen Setting” switch.(a) Automatic transition
You can select a function that enables automatic return to
the navigation screen from the audio screen.
G18035
Select the “ON” or “OFF” and then touch the “OK”.
ON: The navigation screen automatically returns from the
audio or air conditioning screen 20 seconds after the end of
audio or air conditioning screen operation.
OFF: The audio or air conditioning screen remains on.

SECTION 2 – 1
253
AIR CONDITIONING AND AUDIO
Air conditioning
Automatic air conditioning controls254
. . . . . . . . . . . . . . . . . . . . . . . . .

AIR CONDITIONING
254
AUTOMATIC AIR CONDITIONING CONTROLS
G21001
 AVehicles with Navigation system BVehicles without Navigation system

AIR CONDITIONING
255
1 Driver side temperature display (in degrees
Fahrenheit or Centigrade)
2 Passenger side temperature display (in degrees
Fahrenheit or Centigrade)
3 “DUAL” (temperature setting mode change) switch
4 “A/C” switch
5 Air flow control switches
6 Fan speed control switches
7 Air conditioning operation screen display button
8 “TEMP” (driver side temperature control) buttons
9 “OFF” button
10 “AUTO” button
11 Micro dust and pollen filter button
12 Windshield air flow button
13 Air intake control button
14 “PASSENGER TEMP” (passenger side temperature
control) buttons The automatic air conditioning automatically maintains
the set temperature.
In the automatic operation mode, the air conditioning selects
the most suitable fan speed, air flow, air intake and on
−off of
the air conditioning according to the temperature.
The engine switch must be selected in “IG −ON” mode.
“CLIMATE”: Push this button to display switches for
automatic air conditioning control.
NOTICE
To prevent the battery from being discharged, do not
leave the air conditioning on longer than necessary
when the engine is not running.