2006 Lexus GS300 torque

Scheduled Maintenance Log
60
S
CHEDULED
M
AINTENANCE
L
OG
150 Months or 125,000 Miles
❏Replace engine oil and oil filter
1
❏Re-torque axle shaft flange bolts (all models except ES)
2
❏Rotate tires (all models except IS with different size front and rear tires)
❏Visually inspect brake pads and rotors
❏Road-test vehicle
❏Inspect the following:
2
____Axle shaft boots ____Nuts and bolts on chassis
____Ball joints and dust covers ____Steering linkage and boots
____Engine air filter
156 Months or 130,000 Miles
❏Replace engine oil and oil filter
1
❏Inspect engine coolant
3
❏Measure thickness of front brake pads and rotors (GS 430, IS)
❏Replace air conditioner filter (GS 300, GS 430, IS 350, LS 430, SC)
❏Re-torque axle shaft flange bolts (all models except ES)
2
❏Rotate tires (all models except IS with different size front and rear tires)
❏Visually inspect brake pads and rotors
❏Road-test vehicle
❏Inspect the following:
2
____Axle shaft boots ____Nuts and bolts on chassis
____Ball joints and dust covers ____Steering linkage and boots
____Engine air filter
Date: _____________________ Mileage: _______________________
Notes:
Date: _____________________ Mileage: _______________________
Notes: MAINTENANCE

Scheduled Maintenance Log
61
S
CHEDULED
M
AINTENANCE
L
OG
❏Replace engine oil and oil filter
1
❏Clean air conditioner filter (IS 250)
❏Inspect engine air filter
2
❏Inspect nuts and bolts on chassis
2
❏Re-torque axle shaft flange bolts (all models except ES)
❏Rotate tires (all models except IS with different size front and rear tires)
❏Visually inspect brake pads and rotors
❏Road-test vehicle
❏Inspect the following:____Axle shaft boots
____Ball joints and dust covers
____Body
____Brake lines and hoses
____Drive belts
____Exhaust pipes and mountings
162 Months or 135,000 Miles
1Reset the oil replacement reminder (“MAINT REQD”)
light after replacing engine oil, if vehicle is equipped
with this light.2Required only if vehicle is operated primarily in desert,
on dirt roads or while towing.3Replace only with Genuine Toyota Super Long-Life Coolant
or similar high-quality non-silicate, non-amine, non-borate
ethylene-glycol coolant with long-life hybrid organic acid
technology (i.e., a combination of low phosphates and
organic acids).
____Front differential oil (AWD GS 300,
AWD IS 250)
____Rack and pinion assembly
____Rear differential oil (IS, GS 300,
____GS 430, LS 430, SC)
____Steering linkage and boots
Date: _____________________ Mileage: _______________________
Notes: MAINTENANCE

Scheduled Maintenance Log
62
S
CHEDULED
M
AINTENANCE
L
OG
168 Months or 140,000 Miles
❏Replace engine oil and oil filter
1
❏Measure thickness of front brake pads and rotors (GS 430, IS)
❏Replace air conditioner filter (GS 300, GS 430, IS 350, LS 430, SC)
❏Re-torque axle shaft flange bolts (all models except ES)
2
❏Rotate tires (all models except IS with different size front and rear tires)
❏Visually inspect brake pads and rotors
❏Road-test vehicle
❏Inspect the following:
2
____Axle shaft boots ____Nuts and bolts on chassis
____Ball joints and dust covers ____Steering linkage and boots
____Engine air filter
174 Months or 145,000 Miles
❏Replace engine oil and oil filter
1
❏Inspect engine coolant
3
❏Re-torque axle shaft flange bolts (all models except ES)
2
❏Rotate tires (all models except IS with different size front and rear tires)
❏Visually inspect brake pads and rotors
❏Road-test vehicle
❏Inspect the following:
2
____Axle shaft boots ____Nuts and bolts on chassis
____Ball joints and dust covers ____Steering linkage and boots
____Engine air filter
Date: _____________________ Mileage: _______________________
Notes:
Date: _____________________ Mileage: _______________________
Notes: MAINTENANCE

Scheduled Maintenance Log
63
❏Replace engine oil and oil filter
1
❏Inspect nuts and bolts on chassis
2
❏Measure brake pad thickness and rotor runout
❏Measure thickness of brake rotors (GS, 430, IS)
❏Replace air conditioner filter
❏Replace brake fluid
❏Replace engine air filter
❏Replace engine coolant
3
❏Re-torque axle shaft flange bolts (all models except ES)
❏Rotate tires (all models except IS with different size front and rear tires)
❏Road-test vehicle
❏Inspect the following:____Axle shaft boots
____Ball joints and dust covers
____Body____
____Brake lines and hoses____
____Drive belts
____Exhaust pipes and mountings
____Front differential oil (AWD GS 300,
AWD IS 250)
180 Months or 150,000 Miles
1Reset the oil replacement reminder (“MAINT REQD”)
light after replacing engine oil, if vehicle is equipped
with this light.2Required only if vehicle is operated primarily in desert,
on dirt roads or while towing.3Replace only with Genuine Toyota Super Long-Life Coolant
or similar high-quality non-silicate, non-amine, non-borate
ethylene-glycol coolant with long-life hybrid organic acid
technology (i.e., a combination of low phosphates and
organic acids).
S
CHEDULED
M
AINTENANCE
L
OG
____Fuel lines and connections, fuel
tank band and fuel tank vapor
vent system hoses
____Fuel tank cap gasket
____Manual transmission oil (IS 250)
____Rack and pinion assembly
____Rear differential oil (IS, GS, LS, SC)
____Steering linkage and boots
____Transmission fluid (ES 330, SC)
Date: _____________________ Mileage: _______________________
Notes: MAINTENANCE

Scheduled Maintenance Log
64
E
XPLANATION OF
M
AINTENANCE
ITEMS
The following descriptions are provided to give you a
better understanding of the maintenance services that
should be performed on your vehicle. The scheduled
maintenance log indicates at which time/mileage
intervals each service should be performed. Please note
that many maintenance services should be performed
only by a qualified technician.
Air Conditioner FilterRefer to your Owner’s Manualfor service details.Axle Shaft BootsAt driven wheels, check the axle shaft boots and
clamps for cracks, deterioration and damage. Replace
any damaged parts and, if necessary, repack the grease.
Re-torque the axle shaft flange bolts at the indicated
intervals. A qualified technician should perform these
operations.Ball Joints and Dust CoversCheck the suspension and steering linkage ball joints
for looseness and damage. Check all dust covers for
deterioration and damage. A qualified technician
should perform these inspections.Body InspectionVisually check for corrosion, scratches and other
damage. Check outer body panels, inner panels of the
hood and doors, and underneath the vehicle. Apply
touch-up paint to any chips and scratches or have
them repaired by a qualified technician. For further information on maintenance
services that you can perform yourself, see the
“Service Procedures and Specifications” section
of your Owner’s Manual. MAINTENANCE

Scheduled Maintenance Log
E
XPLANATION OF
M
AINTENANCE
ITEMS
66
and organic acids). A qualified technician should per-
form this operation.
Note:Initial replacement is at 120 months/100,000
miles. Replace every 60 months/50,000 miles there-
after.Engine Oil and Oil FilterReplace the oil filter and drain and refill the engine oil
at specified intervals. For recommended oil grade and
viscosity, refer to your Owner’s Manual. Some models
are equipped with a replaceable oil filter element and
oil filter cap O-ring; replace both at each oil change.
Refer to your Owner’s Manual.Engine Valve Clearance (except GS 300 and IS)Inspect for excessive lifter noise and engine vibration
and adjust if necessary. A qualified technician should
perform this operation. (The GS 300 and IS are
equipped with hydraulic valve lash adjusters, which
require no periodic clearance inspection or adjustment.)
Exhaust Pipes and MountingsVisually inspect the exhaust pipes, muffler and hang-
ers for cracks, deterioration and damage. Start the
engine and listen carefully for any exhaust gas leakage.
Tighten connections or replace parts as necessary.Fuel Lines and Connections, Fuel Tank Band and
Fuel Tank Vapor Vent System HosesVisually inspect for corrosion, damage, cracks and
loose or leaking connections. Tighten connections or
replace parts as necessary.Fuel Tank Cap GasketVisually inspect for cracks, deterioration and damage
and replace if necessary.Nuts and Bolts on ChassisRe-tighten the seat mounting bolts and front/rear
suspension member retaining bolts to specified torque. MAINTENANCE