2006 Lexus GS300 boot

Scheduled Maintenance Log
60
S
CHEDULED
M
AINTENANCE
L
OG
150 Months or 125,000 Miles
❏Replace engine oil and oil filter
1
❏Re-torque axle shaft flange bolts (all models except ES)
2
❏Rotate tires (all models except IS with different size front and rear tires)
❏Visually inspect brake pads and rotors
❏Road-test vehicle
❏Inspect the following:
2
____Axle shaft boots ____Nuts and bolts on chassis
____Ball joints and dust covers ____Steering linkage and boots
____Engine air filter
156 Months or 130,000 Miles
❏Replace engine oil and oil filter
1
❏Inspect engine coolant
3
❏Measure thickness of front brake pads and rotors (GS 430, IS)
❏Replace air conditioner filter (GS 300, GS 430, IS 350, LS 430, SC)
❏Re-torque axle shaft flange bolts (all models except ES)
2
❏Rotate tires (all models except IS with different size front and rear tires)
❏Visually inspect brake pads and rotors
❏Road-test vehicle
❏Inspect the following:
2
____Axle shaft boots ____Nuts and bolts on chassis
____Ball joints and dust covers ____Steering linkage and boots
____Engine air filter
Date: _____________________ Mileage: _______________________
Notes:
Date: _____________________ Mileage: _______________________
Notes: MAINTENANCE

Scheduled Maintenance Log
61
S
CHEDULED
M
AINTENANCE
L
OG
❏Replace engine oil and oil filter
1
❏Clean air conditioner filter (IS 250)
❏Inspect engine air filter
2
❏Inspect nuts and bolts on chassis
2
❏Re-torque axle shaft flange bolts (all models except ES)
❏Rotate tires (all models except IS with different size front and rear tires)
❏Visually inspect brake pads and rotors
❏Road-test vehicle
❏Inspect the following:____Axle shaft boots
____Ball joints and dust covers
____Body
____Brake lines and hoses
____Drive belts
____Exhaust pipes and mountings
162 Months or 135,000 Miles
1Reset the oil replacement reminder (“MAINT REQD”)
light after replacing engine oil, if vehicle is equipped
with this light.2Required only if vehicle is operated primarily in desert,
on dirt roads or while towing.3Replace only with Genuine Toyota Super Long-Life Coolant
or similar high-quality non-silicate, non-amine, non-borate
ethylene-glycol coolant with long-life hybrid organic acid
technology (i.e., a combination of low phosphates and
organic acids).
____Front differential oil (AWD GS 300,
AWD IS 250)
____Rack and pinion assembly
____Rear differential oil (IS, GS 300,
____GS 430, LS 430, SC)
____Steering linkage and boots
Date: _____________________ Mileage: _______________________
Notes: MAINTENANCE

Scheduled Maintenance Log
62
S
CHEDULED
M
AINTENANCE
L
OG
168 Months or 140,000 Miles
❏Replace engine oil and oil filter
1
❏Measure thickness of front brake pads and rotors (GS 430, IS)
❏Replace air conditioner filter (GS 300, GS 430, IS 350, LS 430, SC)
❏Re-torque axle shaft flange bolts (all models except ES)
2
❏Rotate tires (all models except IS with different size front and rear tires)
❏Visually inspect brake pads and rotors
❏Road-test vehicle
❏Inspect the following:
2
____Axle shaft boots ____Nuts and bolts on chassis
____Ball joints and dust covers ____Steering linkage and boots
____Engine air filter
174 Months or 145,000 Miles
❏Replace engine oil and oil filter
1
❏Inspect engine coolant
3
❏Re-torque axle shaft flange bolts (all models except ES)
2
❏Rotate tires (all models except IS with different size front and rear tires)
❏Visually inspect brake pads and rotors
❏Road-test vehicle
❏Inspect the following:
2
____Axle shaft boots ____Nuts and bolts on chassis
____Ball joints and dust covers ____Steering linkage and boots
____Engine air filter
Date: _____________________ Mileage: _______________________
Notes:
Date: _____________________ Mileage: _______________________
Notes: MAINTENANCE

Scheduled Maintenance Log
63
❏Replace engine oil and oil filter
1
❏Inspect nuts and bolts on chassis
2
❏Measure brake pad thickness and rotor runout
❏Measure thickness of brake rotors (GS, 430, IS)
❏Replace air conditioner filter
❏Replace brake fluid
❏Replace engine air filter
❏Replace engine coolant
3
❏Re-torque axle shaft flange bolts (all models except ES)
❏Rotate tires (all models except IS with different size front and rear tires)
❏Road-test vehicle
❏Inspect the following:____Axle shaft boots
____Ball joints and dust covers
____Body____
____Brake lines and hoses____
____Drive belts
____Exhaust pipes and mountings
____Front differential oil (AWD GS 300,
AWD IS 250)
180 Months or 150,000 Miles
1Reset the oil replacement reminder (“MAINT REQD”)
light after replacing engine oil, if vehicle is equipped
with this light.2Required only if vehicle is operated primarily in desert,
on dirt roads or while towing.3Replace only with Genuine Toyota Super Long-Life Coolant
or similar high-quality non-silicate, non-amine, non-borate
ethylene-glycol coolant with long-life hybrid organic acid
technology (i.e., a combination of low phosphates and
organic acids).
S
CHEDULED
M
AINTENANCE
L
OG
____Fuel lines and connections, fuel
tank band and fuel tank vapor
vent system hoses
____Fuel tank cap gasket
____Manual transmission oil (IS 250)
____Rack and pinion assembly
____Rear differential oil (IS, GS, LS, SC)
____Steering linkage and boots
____Transmission fluid (ES 330, SC)
Date: _____________________ Mileage: _______________________
Notes: MAINTENANCE

Scheduled Maintenance Log
64
E
XPLANATION OF
M
AINTENANCE
ITEMS
The following descriptions are provided to give you a
better understanding of the maintenance services that
should be performed on your vehicle. The scheduled
maintenance log indicates at which time/mileage
intervals each service should be performed. Please note
that many maintenance services should be performed
only by a qualified technician.
Air Conditioner FilterRefer to your Owner’s Manualfor service details.Axle Shaft BootsAt driven wheels, check the axle shaft boots and
clamps for cracks, deterioration and damage. Replace
any damaged parts and, if necessary, repack the grease.
Re-torque the axle shaft flange bolts at the indicated
intervals. A qualified technician should perform these
operations.Ball Joints and Dust CoversCheck the suspension and steering linkage ball joints
for looseness and damage. Check all dust covers for
deterioration and damage. A qualified technician
should perform these inspections.Body InspectionVisually check for corrosion, scratches and other
damage. Check outer body panels, inner panels of the
hood and doors, and underneath the vehicle. Apply
touch-up paint to any chips and scratches or have
them repaired by a qualified technician. For further information on maintenance
services that you can perform yourself, see the
“Service Procedures and Specifications” section
of your Owner’s Manual. MAINTENANCE

Scheduled Maintenance Log
E
XPLANATION OF
M
AINTENANCE
ITEMS
67
Rack and Pinion AssemblyInspect the rack and pinion assembly for signs of leak-
age, damage and loose electrical connections. Tighten
connections and if you discover any leakage or dam-
age, have it repaired immediately by a qualified tech-
nician.Road TestWhile driving the vehicle, check for proper operation
of engine, transmission, brakes and steering. Also
check for abnormal noise or vibration from any part
of the vehicle.Spark PlugsInstall new plugs of the same type as originally
equipped. Refer to your Owner’s Manual. A qualified
technician should perform this operation.Steering Linkage and BootsWith the vehicle stopped, check for excessive freeplay
in the steering wheel. Inspect the linkage for bending
and damage and the dust boots for deterioration, cracks and damage. Replace any damaged parts. A
qualified technician should perform these operations.
Timing Belt (except GS 300 and IS)Replace every 90,000 miles or 108 months. A qualified
technician should perform this operation. (The GS 300
and IS are equipped with a timing chain, which
requires no periodic inspection.)Tire RotationTires should be rotated according to the instructions
in your Owner’s Manual. When rotating tires, check
pressure and check for damage and uneven wear. If
the spare is not rotated, check the condition and pres-
sure of the spare.Transfer Case Fluid (GS 300 All-Wheel Drive,
IS 250 All-Wheel Drive)Periodic fluid checks and replacement of the transfer
case fluid are not required. Any repairs that require
adding or replacing fluid should be performed by a
qualified technician following procedures in Lexus
service and repair publications.MAINTENANCE