2006 Lexus GS300 brake

KEYS AND DOORS
27 STARTING THE ENGINE WHEN THE ELECTRONIC KEY
BATTERY IS DISCHARGED
If the electronic key battery is discharged, the engine can
be started using the following procedure.
1. Unlock the door with the mechanical key and bring the
electronic key into the vehicle.
G11038
2. While the brake pedal is depressed, hold the ornament side
of the electronic key about 10 mm (0.4 in.) over the engine
switch as shown.
3. Within 5 seconds of the chime sounding, push the engine
switch with the brake pedal depressed to start the engine.
When you push the engine switch with the brake pedal not
depressed at this time, the engine will not start, but it is possible
to select “ACC”, “IG−ON” and “OFF” mode.
If it is not possible to start the engine or change the mode using
this procedure, contact your Lexus dealer.In addition, we recommend that the electronic key battery be
changed as soon as possible.
For vehicles sold in U.S.A.
FCC ID: NI4TMLF−1
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference re-
ceived, including interference that may cause unde-
sired operation.
CAUTION
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.

KEYS AND DOORS
38
Automatic door locking and unlocking
functions
AUTOMATIC DOOR LOCKING
You can select the following functions:

Locking linked with the shift position
All doors are automatically locked when the selector lever is
moved out of “P” position.

Locking linked with vehicle speed
All doors are automatically locked when the vehicle speed
goes above about 20 km/h (12 mph).
You can set or cancel the automatic door locking
functions:
Be sure to apply the parking brake when performing the
following operations.
To select the locking linked with the shift position:
1. Close all doors and select the engine switch in “IG−ON”
mode.
2. Shift the selector lever to the “P” position.
3. Within 10 seconds of selecting the engine switch in “IG−ON”
mode, press and hold the driver’s side power door lock switch
in the lock position for 5 seconds and then release.
The doors will be locked and unlocked to indicate that the
function is set.
To cancel the function, do the above operation again.To select the locking linked with the vehicle speed:
1. Close all doors and select the engine switch in “IG−ON”
mode.
2. Shift the selector lever from “P” to the “N” position.
3. Within 10 seconds of selecting the engine switch in “IG−ON”
mode, press and hold the driver’s side power door lock switch
in the lock position for 5 seconds and then release.
The doors will be locked and unlocked to indicate that the
function is set.
To cancel the function, do the above operation again.

KEYS AND DOORS
39 AUTOMATIC DOOR UNLOCKING
You can select the following functions:

Unlocking linked with the engine switch
All doors are automatically unlocked when the the driver’s door
is opened within 10 seconds after the engine switch is selected
in “ACC” or “OFF” mode.

Unlocking linked with the shift position
All doors are automatically unlocked when the selector lever
is moved to “P” position.
You can set or cancel the automatic unlocking functions:
Be sure to apply the parking brake when performing the
following operations.
To select the unlocking linked with the engine switch:
1. Close all doors and select the engine switch in “IG−ON”
mode.
2. Shift the selector lever from “P” to the “N” position.
3. Within 10 seconds of selecting the engine switch in “IG−ON”
mode, press and hold the driver’s side power door lock switch
in the unlock position for 5 seconds and then release.
The doors will be locked and unlocked to indicate that the
function is set.
To cancel the function, do the above operation again.To select the unlocking linked with the shift position:
1. Close all doors and select the engine switch in “IG−ON”
mode.
2. Shift the selector lever to the “P” position.
3. Within 10 seconds of selecting the engine switch in “IG−ON”
mode, press and hold the driver’s side power door lock switch
in the unlock position for 5 seconds and then release.
The doors will be locked and unlocked to indicate that the
function is set.
To cancel the function, do the above operation again.