114
Scheduled Servicing info
Service message is displayed in km
or days according to the approach-
ing service interval.
The Service Schedule programmes
9 service operations to be performed
every 20,000 km or every year. – days: 27 - 24 - 21 - 18 - 15 - 12
- 9 - 6 - 3.
IMPORTANTInstrument panel
stored info is not deleted if power
supply is interrupted. Service indications will be dis-
played starting from 2,000 km or 30
days from this deadline and then are
shown again at:
– km: 1.800 - 1.600 - 1.400 -
1.200 - 1.000 - 800 - 600 - 400 -
200 - 100 - 50
Warning light/symbol
É
Message
SCHEDULED
SERVICE
WITHIN: xxxx km
SCHEDULED
SERVICE
WITHIN: xx days
SCHEDULED
SERVICE
EXPIRED: 0 km
SCHEDULED
SERVICE
EXPIRED: 0 daysmeaning of the message
Indicates the number of
kilometres to go before next
Scheduled Servicing
Indicates the number of
days to go before next
Scheduled Servicing
Indicates that the car has
reached the km required to
perform the Scheduled
Service operation
Indicates that one year has
past since last Scheduled
Service operationRemarks
Contact a Lancia Dealership
to programme the Scheduled
Service operation
Contact a Lancia Dealership
to programme the Scheduled
Service operation
Contact a Lancia Dealership
as soon as possible to carry out the
programmed Scheduled Service
operation
Contact a Lancia Dealershipas soon
as possible to carry out the pro-
grammed Scheduled Service operation
323
Oil consumption is ex-
tremely low. If the oil level
needs topping up again af-
ter a short period of time, have the
system checked for leakage at a
Lancia Dealership.BRAKE AND HYDRAULIC
CLUTCH FLUID (fig. 16)
Unscrew cap A: check that the fluid
level in the reservoir is at maximum.
Fluid level in the reservoir shall not
exceed the MAXmark.
If fluid has to be added, it is sug-
gested to use the brake fluid in table
"Fluids and lubricants" (see chapter
"Technical characteristics").
NOTEClean accurately the tank cap
Aand the surrounding surface.
Prevent brake fluid, which
is highly corrosive, from
coming into contact with
painted parts. Should it happen,
immediately wash with water.
Do not let the power
steering fluid come into
contact with hot engine
parts. It catches fire very easily.
fig. 16
L0A0294b
– Refit hose C.
– Refit cap Aand check for seal
proper positioning into its seat, then
secure the cap with screws B.At plug opening, pay maximum at-
tention in order to prevent any impu-
rities from entering the tank.
For topping up, always use a funnel
with integrated filter with mesh equal
to or lower than 0.12 mm.
IMPORTANT Brake fluid absorbs
moisture, for this reason, if the car is
mainly used in areas with a high de-
gree of atmospheric humidity, the
fluid should be replaced at more fre-
quent intervals than specified in the
“Service schedule”.
