2006 HONDA ACCORD switch

[x] Cancel search: switch

Page 73 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual µ
With the driver’s door open and the 
key in the ignition, both door lock
switches are disabled. They are not
disabled if the driver’s door is closed.
Pushing the switch down on the
open passen

Page 74 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual µµ
µ
The ceiling light (if the ceiling light 
switch is in the center position) will
come on when you press the
UNLOCK button. If you do not open
any door, the light stays on f or about
30 secon

Page 79 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual After the seat reaches a comfortable 
temperature, select LO by pushing
the back of the switch. This will keep
the seat warm. 
In HI, the heater turns of f when the 
seat gets warm, and turns back on

Page 80 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual µ
Raises or lowers the 
seat. 
Adjusts the seat-back 
angle f orward or
backward.
Moves the f ront of the
seat up or down and
the rear of the seat up
or down.
Moves the seat
f orward and backward.
T

Page 82 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual The height of your driver’s seat is 
power adjustable. Pull up on the
switch to raise the seat. Push it down
to lower the seat. 
Make all adjustments bef ore you 
start driving.They are most ef f ec

Page 85 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual Keeptheinsideandoutsidemirrors 
clean and adjusted f or best visibility.
Be sure to adjust the mirrors bef ore
you start driving. 
The inside mirror has day and night 
positions. The night position re

Page 86 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual µ
Turn the ignition switch to ON (II) 
toraiseorloweranywindow,push
the switch down and hold it. Release
the switch when you want the
window to stop. Close the window by
pulling the switch up and ho

Page 87 of 281

HONDA ACCORD 2006 CL7 / 7.G Owners Manual µIf the driver’s
window senses any obstacle while it 
is closing automatically, it will
reverse direction, and then stop. To
close the window, remove the
obstacle, then use the window switch
again